Fabricante:
(Categoría: 106)
SMG DS 315-1500/1300 CNC hydraulic press was manufactured in 1984 in Germany. The machine, consisting of two interconnected stations, is used for pressing metal workpieces in manual, semi-automatic and automatic mode with a pressing force of up to 315 tonnes. All the machine’s machining parameters are set using a CNC control with a full-colour, touchscreen display. The press is equipped with a hydraulic and pneumatic sheet metal feeder, servo drives for feed rollers to set a very precise stroke of up to 0.1 mm, safety cages and workpiece feed and drop control sensors. The SMG 315 T machine underwent a complete overhaul in 2007, during which components such as pumps and safety installations were replaced. Technical data of the SMG DS 315-1500/1300 press - maximum press force: 315 t - working table dimensions (L x W): 1500 x 1300 mm - upper machine point (from the table): 750 mm ...
SINO NCP 160 eccentric press built in China in 2018 by Sino Machinery & Tools (Dongguan) Co., LTD. performs machining of metal workpieces with a press force of 160 tonnes. The machine is equipped with high-quality components, including e.g. a 100 mm adjustable slider making up to 25 to 55 strokes per minute, and a YU JAIV PDH-120 indicator displaying the distance of the die between the table and the slider. The large working area, ease of operation and outstanding precision, guarantee excellent machining results. The press offers the possibility of combining it with an automatic feeding system in order to increase the number of parts produced and significantly reduce costs. The total weight of the machine is 13 tonnes. Technical data of the SINO NCP 160 press - maximum press force: 160 t - work area dimensions (L x W x H): 910 x 600 x 410 mm - bolster dimensions (L x W x H): 125 ...
Transfer press KRUPP PST-A 160 built in 1980. Technical data of the KRUPP PST-A 160 press: - nominal pressure: 160 tons - cutting force grade 1: 400 KN - force between stands: 1200 KN - number of working steps including cutting stage: 11 - distance between stands: 200 mm - slider stroke: 210 mm - drawing depth: 70 mm - range of jumps, infinitely adjustable: 15-75 / min. - production range of jumps with repeatability of its setting: 25-75 / min. - number of actuation movements: 15-25 / min. - a usable work resource for a jump in the range of 25-75 strokes per minute. : 20,000 J - maximum load on a single step: 500 KN - maximum load of a single step using inserts: 630 KN - maximum width of the tape: approx. 340 mm - maximum diameter of the cut: 120 mm - minimum diameter of the pattern: 30 mm - distance between stands: 2450 mm - height of tool building at the lower posi ...
The Strojane Piesok LODD 200 press brake was produced in 1982 by the Czechoslovak company Strojarne Piesok. The machine works with a force of 200 tons of pressure and allows bending sheet metal with a length of 4000 mm. The press is equipped with a table (L x W) 4000 x 200 mm, and its power is 22 kW. The total weight of the machine is 22,660 kg. Specifications of Strojane Piesok LODD 200 press - press force: 200 t - maximum bending length: 4000 mm - table dimensions (L x W): 4000 x 200 mm - upper tool maximum stroke: 100 mm - distance between table and slider: 200 mm - distance between body walls: 3300 mm - maximum number of clutch engagements: 14/min - main motor power: 22 kW - main motor speed: 1460 rpm - air pressure: 0,4-0,6 MPa - maximum air requirement: 25 m3/h - power supply: 380 V; 50 Hz - dimensions (L x W x H): 4420 x 2060 x 3800 mm - weight of the LODD 200 pre ...
The CNC press brake SMD PBH 110-3100-4C produced in 2006 is offered in a set with the ANTIL TWISTER F5 robot. Technical parameters : - manufacturer: SMD - type: PBH 110-3100-4C - year of production: 2006 - control: CNC CYBELEC ModEva 10 - overworked time: about 20,000 man-hours - pressure force: 110 tons - bending width: 3100 mm - maximum working speed: 10 mm / s - table width: 60 mm - table height: 960 mm - stroke: 465 mm - frame spacing: 2600 mm - throat: 410 mm - power supply: electric - 11.5 KW, 400 V three phases - oil tank capacity: 250 l - dimensions of the press: 3960 × 2045 × 3650 mm - total weight: 9500 kg Processing on a 3 m table and palletizing of finished details on 3 europallets.
The LVD EHT DELTA 1250 RS TK turret punching machine was built in 1999. It is equipped with a MNC 32000 CNC control. The punching machine has a maximum pressure of 20 tons and allows the processing of a sheet with dimensions of 1250×1250 mm and a thickness of 4.5 / 6 mm. The machine performs a maximum of 650 beats per minute. The press is equipped with a hydraulic system, a turret with four stations (A, B, C, D) and a clearance adjustment sensor G8823142. Technical parameters: – CNC control: MNC 32000 – maximum pressing force: 20 tons – sheet dimensions X x Y: 1250 x 1250 mm – sheet thickness: 4.5 / 6 mm – maximum number of strokes: 650 1 / min – rated number of strokes: 300 1 / min – oil tank: 200 L – total power: 18.7 kW – engine: 11 kW – voltage: 400 V – weight: 17 tons Hydraulic System – Thick Turret: – instrumentation: station A, B, C, D ...
Crank press ZAMECH PKRR 400A built in 1974. Technical data : - pressure: 400 tons - clearance between stands: 1020 mm - ram stroke: 315 mm - number of strokes per minute: 20 - maximum distance of the slider from the table closed: 742.5 mm - slider adjustment: 250 mm - table dimensions: 1020 x 1050 mm - main engine power: 40 kW - main engine revolutions: 1500 1 / min. - weight of the press: 40 t
Press brake URSVIKEN KDP 16031 160 ton built in 1987 in Sweden. Technical parameters : - maximum pressure: 160 tons - working length: 2.50 m - total length of the machine: 3.20 m - weight: 8.6 tons ... más información
Crank press HECKERT PKZ 400.1 built in 1980. Technical data : - maximum pressing force: 400 t - working path - lower position of the slider to the maximum pressing force: 21 mm - maximum drawing depth: 125 mm - pressing force using the maximum drawing depth: 160 Mp - idle speed of the slider: 18 min-1 - maximum number of switchings: 9 min-1 - ram stroke (min-max): 315 mm - slider adjustment: 200 mm - holding force of the drawing device at air pressure: 63 Mp, 5 kp / cm2 - force of the drawing device ejector at air pressure: 10 MP, 7 kp / cm2 - total weight: 38.5 t
The turret press AMADA EUROPE 245 was produced in 2000 (machine installation: 2001). The price of the machine includes: installation and training in the use of the machine Punching machine technical data: - CNC control: FANUC 18 i-P - working time: 35,000 h - pressure: 20 t - work table: X = 600, Y = 400 - maximum punching format without intercept and with 31 stations head: 1020 x 1290 (Y-10; Y1010 T2XX; Y-50; Y970 T3XX) - maximum size of a punched sheet with an intercept: 1020 x 2540 mm - maximum size of the sheet to be punched with the intercept + 1 revolution (optional): 1500 x 2540 mm - maximum sheet thickness on the ball table: 6 mm - maximum sheet thickness on the brush table: 3 mm - maximum allowable weight on the table: 100 kg - punching accuracy: + -0.1 mm - positioning accuracy: + -0.07 mm - number of pneumatic clamps / grips: 2 - number of axes controlled s ...
Machine Type: Horizontal Bending Machine Manufacturer: Kunkel Type: URM 30 Year of construction: to follow Condition: used Offer will only be sent if a complete imprint is provided! Price Vb Location Warstein , Germany Reference MV-KÖL-0424-13 DESCRIPTION We offer you a used horizontal bending machine from the manufacturer Kunkel. Pressing force 30t Weight approx. 1.2t more data and pictures will follow. Availability: by appointment, machine still in production. Loading possible. Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are excepted
Max. pressing force 60 to Installation height 500 mm Stroke of the press ram 300 mm Passage between the columns 430 mm Pusher bore 40D H7 Clamping table 430 x 310 mm ... más información
Specifications: - Max. working length 3100 mm - Column passage 2550 mm -Max. Press force 240 t - Projection 410 mm - Max. stroke 260 mm - Max. installation height 530 mm - Table height 880 mm - Table width 90 mm - Feed speed / rapid traverse 1 - 130 mm/s - Pressing speed 1 - 10 mm/s - Retraction speed 1 - 130 mm/s - Drive power 22 kW - Space requirement approx. W 3700 x H 2800 x D 2100 mm - Weight approx. 11 t -with: - CNC control DELEM DA 66 T for Y 1+2 , X , Z , - E.- Footswitch - Crowning - Hydraulic tool clamping - Laterally movable support arms - Deer foot tool - V - Die ( incomplete ) - various tools ( incomplete )
1250 TON SMS-HASENCLEVER SCREW DOWN HOT FORGING PRESS YEAR NEW . 1983 NEW ELECTRIC CONTROLS 2012 MODEL FPRN-315/750/475/1275 RATED FORCE .. 1020 TONS (10000 kN) MAXIMUM FORCE 2040 TONS (20000 kN) STROKES PER MINUTE ... 23 SPM SCREW DIAMETER ... 12.4" (315 MM) STROKE OF RAM 18.7" (475 MM) STROKE ADJUSTMENT PROGRAMMABLE RAM SIZE (L-R) ... 26.4" (670 MM) RAM SIZE (F-B) ... 39.4" (1000 MM) BED SIZE (L-R) ... 27.9" (710 MM) BED SIZE (F-B) ... 39.4" (1000 MM) WIDTH BETWEEN UPRIGHTS ... 29.5" (750 MM) DAYLIGHT . 31.5" TO 50.2" (800 TO 1275 MM) MOTOR 125 HP
Details: Press brake length: 3050 mm Weight: 12,700 kg ... más información
Press capacity: 10.000 kN Height: 480 mm Stroke: 350 mm Working height: 1,090 mm ... más información
Capacity 250 ton Kinetic energy of moving parts at the end of max. ram stroke 13,5 kj Max. ram stroke 400 mm Number of ram stokes (SPM) 34 Slide clearance 560 mm Ram size (front-back 560 mm Table size 670 x 750 mm Lower ejector capacity 16 ton Lower ejector movement 105 mm Main drive motor powe 15 kW Press dimensions 3710 x 1925 x 4415 mm Press weight 18000 kg