subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 110)
TOOL CART:. - capacity:35000 kgDIMENSIONS / WEIGHTS:. - space requirements length:3450 mm - space requirements width:3100 mm - total height:420 mm - height above floor level:440 mm - total weight approx.:12000 kgTechnical description :- Travel from middle is = 1425mm left / 1425mm right- Stroke upper carriage from middle = 925mm left / 925mm right- Thrust capacity = 130 kN - Thrust speed carriage = 20/2 m/min- Travelling speed undercarriage = 24/2 m/min- Travelling speed uppercarraige = 12/2 m/min
TOOL CART:. - capacity:35000 kgDIMENSIONS / WEIGHTS:. - space requirements length:3450 mm - space requirements width:3100 mm - total height:420 mm - height above floor level:440 mm - total weight approx.:12000 kgTechnical description :- Travel from middle is = 1425mm left / 1425mm right- Stroke upper carriage from middle = 925mm left / 925mm right- Thrust capacity = 130 kN - Thrust speed carraige = 20/2 m/min- Travelling speed undercarriage = 24/2 m/min- Travelling speed uppercarraige = 12/2 m/min
dimensions: L 2900 x W 1950 x H 1150mm; Swivel; Equipped with foot controls and tools ... más información
Clamping table. -Dimensions table with holes grid: 500l x 400w x 85h mm, holes M12. -Weight: approx. 60-70 kg each. The bottom is flat, the table is parallel, there is a pattern milled in the bottom to move the table on the machining center. ... más información
4x unused weldon cage BT50 ISO50, round 20mm x 80mm long. ... más información
For tube processing, diameter approx. 630 mm, tip height approx. 500 mm, 750 kg per piece. ... más información
liter capacity:21 l/minPressure of coolant:50 barrated current:20 AClean water tank capacity:300 ltotal power requirement:16 kWweight of the machine ca.:200 Kgdimensions of the machine ca.:1,2 x 0,8 x 1,4 mWe are importers for FRASCARA high pressure coolant systemsFrascara delivers compact, mobile and reliable high pressure coolant / filtering systems with 50 or 70 bar 21 l/min.We can provide up to 3 pressure levels controlled by M-Functions.Oil operated systems are available also.Areas of application:Cleaning of coolant lubricants, emulsions and cutting oils without filter residues. Installation on machine tools for individual machinesFunction:The lifting pump inside the machine tank with minimum 2bar / 20 l/min capacity presses the contaminated water through the twin filter unit into the clean water tank. of the Frascara unit, from where it is pumped back through the spindle by a 50 ba ...