máquinas de termoconformado usadas para la venta

Thermoforming machine for cups (Eltonpack Mod. 6000) Year 2000 Includes BIG DRUM dispensers ... más información

A device for closing trays by Multivac with a capacity of up to 20 cycles per minute. This Multivac T700 packer is in very good condition with only 429 operating hours. This particular model comes with the SKIN packing tool. Tray size: 238 x 166 (D13); New Busch vacuum pump 360m3 / h; Input conveyor; Water cooling unit; Instructions;

Tray thermoforming machine for packaging meat products and derivatives. Compact machine made up of a thermoforming module, loading area, upper film applicator, welding area and cross section. Bottom film width: 520mm Upper film width: 515mm Mold 4 x 2 trays dimensions: 150 x 120mm With ink injector IMAGE mod. 9040

Multivac C 500 is double chamber packing machine. This one with vacuum and gas flushing system. Double chamber machines from MULTIVAC are easy to operate, clean and service. They offer the highest output on the smallest footprint and also provide impressive performance over their entire machine life thanks to their production output and pack quality. The evacuation and gas flushing processes are pressure-controlled and thus guarantee reproducible packing results. MC 06 machine control with precise vacuum measurement in the chamber Machine dimensions W x D x H (with open chamber lid) in mm: 1,600 x 1,055 x 1,365 Sealing bar arrangement/dimensions: 1 x front, 1 x rear (2 x 650 mm)

Little used automatic horizontal packaging machine Enflex F-19 for shaping and filling bags of heat-sealed foils. The machine is equipped with a device for gluing plastic zippers. The machine is without a discharge conveyor and a dispenser. Bag size width - min. 80 mm / max.190 mm height - min.120 mm / max. 300 mm bottom - min 40 mm / max 100 mm weld width top weld 6 mm, vertical weld 9 mm Machine output 30 to 50 bags per minute

Capacity : 7,200 pieces (40 grams) per hour Machine is useful for honey, jam, butter, chocolate, margarine, ketchup, yogurt, water, juice, liquid soap, various medicines, ... más información

Manufacturer Kramer & Grebe Year 2000 Located in Turkey Machine is in very good condition Moulding width : 555 mm bobbin width : 565 mm ... más información

Clever thermoforming machine with 2-channel scale, it is new and only worked for 3 years and then it was stopped for more than twenty years. Scale included ... más información

Multivac thermoform packaging machine for kashar cheese /cheddar Lifting system for preheating Down film(soft) : Width : 357 mm Thickness : 200mm Up film(Soft) Width : 340 mm Thickness : 80 mm ... más información

Net packer Manufacturer: Giro Model: CA-9S Year of manufacture: 2011 Incl. Girprint E-200 label printer ... más información

Work table maximum 505x775 mm Maximum height of the matrix (mould) 100 mm Foil thicknesses from 0.15 - 2.0 mm Year of production 1983 length - 4500mm. width -1900mm. height - 2800mm. weight approx. 2000 kg. 400V power supply Max power consumption - 11.2 kW ... más información

Complete set and technical characteristics of the car: Format Tool: - Format 3 pieces 1-2, 2-2, 3.2 - Package height 5 / 35-15 / 45 mm, spacers 5 mm each - The bottom of the tray is even, smooth - Perimetric sealing plate - Packing type MGS - Type of the bottom film - soft (re-equipment on a rigid film is possible). - Productivity up to 6 cycles per minute General characteristics - Film width 420 mm (+ 2 / + 4) - Film thickness up to 300 microns - Width 650 mm - Height 2200 mm - Frame length 5600 mm 7 color touch screen control panel in Russian Possibility to store 20 programs password to access settings (three levels) display of the current state of the machine program test, washing program at closed stations (30 ° C) Unwinder bottom film for 3 cores, max. Ø 400 mm compressed air - Preheat film on top - Laying length 1500 mm - Vacuum pump Busch R5 100 m3 / h ...

The thermoforming machine is designed for producing deep-drawn formed parts using heated plastic film. The machine features a controlled unwinder to feed the plastic film from a roll and a toothed conveyor belt for automatic transportation through the machine. The film is heated from above and below in the heating station, then vacuumed and compressed air is used to pull it into a mold for deep-drawing. After cooling, the outer contours are trimmed, and the individual blanks are held in place by retaining collars. In the stacking station, the product blanks are pressed out of the film and stacked on a conveyor belt, which transports them out of the machine once a set amount is reached. The entire process is automated based on programmed specifications, except for the manual removal of finished workpieces at the outlet. The trimming and stacking stations can be adjusted for different prod ...

Characteristics: - Year of production: 11/2006 - Hours of operation: 8000 - Overall dimensions of the machine 3500mm x 5200mm h 5100mm - Weight: 7700kg - Maximum plate size: 2000x1200 - Maximum mold height: 800mm - Cooling fans: 8 - Sheet thickness: 2 - 10 mm - Adjustable frame Elements of the quartz heating surface - Size 240x150mm - Quartz type - Installed power 107kW The CmsPlast Villa 2000 - BR/5 2012 vacuum plate thermoforming machine is a 2006 machine, which uses quartz technology to produce plastic objects with high productivity and molding precision. The processing field of the machine is 2000 x 1200 h 800 mm, which makes it ideal for producing large objects.

This AMUT COMI AMP 630 GP/FL was manufactured in the year 2017. The machine has a film width of 2000 mm, and a mould area of 630 x 530 mm. ... más información

The Cannon PF 171506 sheet thermoforming machine is a 2005 machine that uses twin-sheet technology to produce plastic objects with high productivity and molding precision. The working field of the machine is 1650 x 1500 xh 600 mm, which makes it ideal for producing large objects. The machine is equipped with two ovens, one lower and one upper, which allow to heat the plastic plates and to shape them according to the desired shapes. Furthermore, the thermoforming machine is equipped with two automatic loaders, which simplify and speed up the raw material feeding process. The Cannon PF 171506 thermoforming machine is also equipped with 5 fans for cooling the molding, which guarantee perfect solidification of the plastic material and therefore greater molding precision. The overall footprint of the machine is 13 meters long by 5 meters wide, which requires adequate space for instal ...

The machine will be shipped with 3 tools: Tool 1: 2:1 packagingsize 225×170mm (variable forming depth max. product height 80mm); Tool 2: 3:1 packagingsize 225×110mm (variable forming depth max. product height 80mm); Tool 3: 3:1 packagingsize 195×110mm (variable forming depth max. product height 80mm);

TFT FCS 720 - 3 Station Thermoforming Machine The machine working hour is 73.000. Year 1994. Max Tooling Area : 685x500150 Min Tooling Area : 350250 Max Forming Area ( ROLL ) : 720500 Maximum Cycyle : 35 Maximum Material FOR FORMING : 1,5mm. It’s avaliable for PS,PET,PVC, PET. It has tauten but we advice pre-heater for PP.

Tray former, with NORDSON hot melt dispenser. Maximum tray dimensions 600 x 370mm Production capacity from 1000 to 2.500 pcs/hr. DOCUMENTATION AVAILABLE ... más información

Thermoforming machine with winding rolls Oven size: 80x110 cm ... más información