máquinas de bebidas usadas para la venta

Agitators for the fixed installation AFEOL (new)  ... más información

gravity filling valves O + H  ... más información

screw caper heads ZALKIN aluminium 28 mm from filler SIMONAZZI  ... más información

mould set 0.5 lt for blow moulding machine SIDEL SBO 16 series 2  ... más información

New bottles depalletiser SIMONAZZI with palett magazin and roller conveyors  ... más información

Screw caper heads d 28 aluminium from SIMONAZZI filler  ... más información

Compressor KAESER 10 bar power 90 KW  ... más información

Compressor ATLAS COPCO Z 55 model oil free with dryer 8 bar 55 KW  ... más información

We sell our bottle washer the hourly output was at 4500fl/h YOC 1988 13 cells Length = approx. 7m Width = approx. 2.2m  ... más información

Hop Cannon Braukon HopGun 325 liters – 2014 Good condition hop cannon for dry hopping, also referred to as cold-hopping, made by German BrauKon in year 2014. Hob volume 325 liters and it has been used for hopping beer in 150hl fermenters. Dry hopping is a procedure where essential oils are released from the hops pellets to cold, unmature beer by circulating beer from fermenters through a hop cannon. It provides better efficiency and quality, reduced dissolved oxygen (DO) levels in the finished product, and a safer working environment for the brewers. Once pellets are loaded in, air gets purged out with CO2/N2. Beer is pumped into the cannon under pressure, the hops pellets are caught in a whirlpool of sorts inside the cannon vessel and dissolve to create a pungent slurry. This mixture of beer and hops is then pumped from the hop cannon back to the fermentation vessel, and the b ...

- Tanks standing on concrete base - Flate floor with slope - Content: 57 000 liters - Material: stainless steel AISI 316 / DIN 1.4404 - Vertical on concrete base - Flat bottom with slope - Diameter: 4 m - Height: approx. 5.60 m - Residual drain, ball valve DN 50 - Clear drain, ball valve DN 50 - Oval manhole - Taster - Level indicator - Cleaning pipe with washing ball - Dome DN 400 mm - Aeration and ventilation connection DN 50 - Trickling ring - The entire tank farm is in very good condition

TTank storage of 10 tanks DEFRANCESCHI, total 1 000 000 liters - Tanks standing on concrete base - Flate floor with slope - Content: 100 000 liters - Material: In stainless steel AISI 316 / DIN 1.4404 - Diameter: 4 m - Height: approx. 8.50 m - Residual drain, ball valve, NW 65 - Clear drain, slide valve NW 65 - Oval manhole - Taster - Level indicator - Cleaning pipe with washing ball - Dome DN 400mm - Aeration and de-aeration connection DN 50 - Overflow ring - With walkway system and access staircase - The entire tank farm is in very good condition

Flash Pasteurizer GEA MICRO 50hl/h for Beer This flash pasteurizer was manufactured in 2018 by GEA Denmark for beer pasteurization and it will soon be dismantled professionally. Pasteurizer is completely built on one stainless steel frame and all equipment and instruments are wired. All product touching parts are polished food quality stainless steel (AISI 316) or special plastic suitable for food processes. The machine has CIP connection for proper cleaning. Product is heated in and cooled after pasteurization in a 3-stage plate heat exchanger (heating, cooling and heat recovery) using low pressure steam for heating and cold water / glycol solution for cooling. Pasteurization takes place in tubular stainless steel holding tube following the heat exchanger. The machine contains a service tank for water during CIP process, heat exchanger, holding / pasteurization tube, control cabinet ...

Beer Separator GEA Westfalia GSE capacity 200 hl /h - 2017 This centrifuge has been designed for beer filtration and clarification of beverages. It was manufactured in year 2017 and it has hydraulic capacity 0-200 hl/h. The self-cleaning, disc stack type bowl makes the machine suitable for fully automatic cleaning - in - place (CIP). The bowl is driven by frequency controlled 22 kW AC electric motor which is connected to the bowl with a power belt. Opening and closing of the bowl for discharging the solids takes place hydraulically using water. The product feed and discharge are in a closed system. The product feed and discharges in the bowl are hydrohermetically sealed and do not feature mechanical seals. All product-contacting parts are made of stainless steel; the gaskets conform to the requirements of food operations. The delivery includes separator, valve panel, control panel  ...

Vacuum filler SEN Fulla for still drinks with 12 filling valves Walking direction: from left to right  ... más información

Sidel PET filling ling products: drinks with Co², beer capacity: 12.000 bph per 1,5 ltr. It is possible to turn on individual machines of the line in a dry state. bottle formats: 500 ml 700 ml, 1.500 ml all neck bottle formats: PCO 28 - 1810 1. Blow molding machine Sidel SBO 10 year of manufacturing: 1999 2. Cooler for SBO 10 year of manufacturing: 1998 3. Preform hopper Sameto Technifil Year of manufacturing: 1999 4. Preform conveyor Sidel year of manufacturing: 1998 5. Compressor SIAD year of manufacturing: 1999 and cooling for the compressor 6. Air conveyor RAFALE year of manufacturing: 12/1998 7. Mixer 240 C, Moravek 'CFT year of manufacturing: 2000 8. Tribloc Alsim PET r.v. for 60 filling taps year of manufacturing: 2000 9. Labelling machine Krones Contiroll year of manufacturing: 2004 10. S ...

Filler bloc Stork/Zalkin 48/8 with 48 filling valves and 8head Zalkin screw capper for Aluminium Screw Caps Bottle Size: 330 ml glass bottles Filling Product: Hotfill Juices Capacity: 18.000 BPH by 330 ml glass bottles running direction: right - left including vacuum pump including electric control panel including new main bearing complete reconditioning of the lifting cylinders complete reconditioning of the filling valves complete reconditioning of the cap sorting unit, cap Channel and Capping Heads including safety-housing all around the machine includung testrun on the machine in our workshop

Mixer Ortmann + Herbst Type: Intermix C 25 year of manufacturing: 1990 capacity: up to 25.000 ltr. / h with Siemens touch panel The machine is installed and in production until October / November 2023 in a German mineral water company and can be inspected during production. The machine is in an absolutely top condition.

Manufacturer: Pasilac Therm AS Denmark Type: N-35 Year: 1985/ 2022 Capacity: 60 hl/h  ... más información

Palletizer KRONES PRESS UNI, production year 2007 Along with the conveyors presented in the layout. • Palletizer for collective packages, capacity: approx. 50 pallets / h for specific palletizing formats, • Top loading, packs served in 2 tracks, • Pallet magazine, • A feeder for cardboard pads with a magazine for cardboard pads, • Control cabinet based on Siemens S7 control, • A platform for the operator in accordance with the dimensions presented in the layout, • Operator Panel, Packs and pallet conveyors in accordance with the presented layout 1. Empty pallets infeed conveyors 2. Packs conveyors