tornos usadas para la venta

turning diameter over bed:100 mmturning diameter over slide rest:70 mmturning length:300 mmtotal power requirement:0,8 kWweight of the machine ca.:0,5 tdimensions of the machine ca.:1,0 x 0,6 x 1,2 mPerfect condition table turning machine with belt drive and single tool holder ... más información

:LL 550 | LL 750 | LL950 turning diameter:550 | 750 | 950 mmturning length:3000/4000/5000/6000/7000/8000/9000/12000/14000 mmcontrol:Siemens/Fanuc/Fagor center height over bed:475|575|675 mmbed width:990 mmspindle bore:153/230/305/405 mmspindle nose:A2-11/A2-15/A2-20/A2-28 spindle speed:9-600/9-500/7-400/5-250 U/minspindle taper:6 MKspindle drive:22/26 (30/37 opt.) kWtool turret:4/8/12 hydraulisch oder elektrisch tool holder -shaft diameter:32 (40 opt.) mmtailstock quill diameter:165|200 mmtailstock quill adjustment:250 mmtaper in tailstock:6 MKtailstock movement:über Motor travel -x axis:370 | 480 mmtravel - z:= Spitzenweite mmservo motor X-axis:3 | 4 kwservo motor Z-axis:4 | 7 kwrapid power traverse in X-and Z direction:5/4 m/minhydraulic motor:2,2 (2,9 opt.) kWcoolant pump drive:3 (15 opt.) | 15 barweight of the machine ca.:12,7/15,3/18/21,5/24/26,6 | 13,7/16,4/19/22,2/25/27,6/30,2 ...

turning diameter over bed:100 mmturning diameter over slide rest:70 mmturning length:80 mmtotal power requirement:1,0 kWweight of the machine ca.:0,5 tdimensions of the machine ca.:0,7 x 0,6 x 1,2 mfacing lathe with manual feed, various accessories ... más información

:LL-1250 | LL-1450 | LL-1650 turning diameter:1250 | 1450 | 1650 mmturning length:5000/6000/7000/8000/9000/12000/14000/16000 mmcontrol:Siemens/Fanuc/Fagor center height over bed:705|805|905 mmwidth of cross cariage:600 mmbed width:1370 mmspindle bore:200 mmspindle nose:A2-15/A2-15/A2-20/A2-28 spindle speed:4-400 U/minspindle taper:6 MKspindle drive:22/26 (30/37 opt.) kWtool turret:4/8/12 hydraulisch oder elektrisch tool holder -shaft diameter:40 mmtailstock quill diameter:300 mmtailstock quill adjustment:250 mmtaper in tailstock:7 MKtailstock movement:über Motor (Zahnstangenantrieb) travel -x axis:755 mmtravel - z:= Spitzenweite mmservo motor X-axis:4 kwservo motor Z-axis:7 kwrapid power traverse in X-and Z direction:5 m/minhydraulic motor:1,4 (ab 9m: 3,6) kWcoolant pump drive:15 barweight of the machine ca.:auf Anfrage machine length:15150/16150/17150/18150/19150/20150 mmmachine width ...

turning diameter over bed:425 mmturning diameter over slide rest:215 mmturning length:1000 mmturning speed range:11,2 - 2240 U/minfeed range:0,02 - 1,6 mm/Uspindle bore:62 mmtotal power requirement:10 kWweight of the machine ca.:3 tdimensions of the machine ca.:2,8 x 1,2 x 1,3 mwith rapid feedcoolant attachment3-jaw chuckMULTIFIX toolholder system

turning diameter:920 mmturning length:2034 mmx-axis:1025 mmy-axis:650 mmz-axis:2106 mmb-axis:240 °c-axis:360.000 x 0,001 °w-axis:2032 mmrapid traverse::40 m/minspindle turning speed range:1 - 1600 U/mintool taper:CAPTO C8work piece power:37 kWspeeds of tool:1 - 10000 U/minSpindle bore:170 mmtotal power requirement:125 kVAdimensions of the machine ca.:8,5 x 3,2 x 3,9 mweight of the machine ca.:26,5 tMachine with MAZAK Matric CNC control- 2 spindle boxes with C-axis and W-axis for right hand spindle- 2 power chucks 650 mm dia. Kitagawa- tool changer for 80 tools- Renishaw probe tester- hand operating panel- milling head with B- and Y axis- spindle changed in 10/21, last service in 12/23- coolant through spindle- splash housing, chip conveyor

faceplate diameter:1400 mmswing diameter:1600 mmturning height:1000 mmfaceplate turning speed range -stepless-:1 - 250 U/minmax. horizontal adjustment of cross-rail sup.:950 mmmax. adjustment of vertical turret slide:700 mmmax. vertical adjustment of side-support:1000 mmmax. horizontal adjustment of side-support:630 mmadjustment of cross-rail:660 mmadjustment speed of cross-rail:400 mm/minmax. workpiece weight:6300 kgfeed per revolution:0,025 - 10 mm/Upower capacity:56 kWweight of the machine ca.:21,5 tdimensions of the machine ca.:3 x 4,2 x 4,2 mwith 2-axes digital readout5-station turret headside headV-constant cutting speed

turning diameter:300 mmswing diameter:350 mmturning height:275 mmx-axis:925 mmz-axis:250 mmclamping chuck diameter:200 mmFeed speed:30 m/min.total power requirement:45 kWweight of the machine ca.:7 tMachine was used just from time to time in the last years - very good condition!with CNC SIEMENS 840 D12-station turret head with driven toolingsworkpiece in and out conveyor beltcoolantattachment and chip conveyordiverse accessories

:KDM-K 25 | KDM-K 28 | KDM-K 31 | KDM-K 35 faceplate diameter:2250|2830|3150|3500 mmswing diameter:2500|2800|3100|3500 mmturning height:1600/2000/2500 |2000/2500 |2000/2500 |2000/2500 mmmax. torque on the faceplate:63000 Nmmax. workpiece weight:10/16 ttable speeds:0,5-80 |0,5-80 |2-63 |2-50 1/minTravel of Ram (vertical):1000/1250|1000/1250|1000/1250|1000/1250/1600 mmTravel of ram (horiz.):1400|1600|1700|1800 mmrapid traverse X-axis:3 m/mincross section of ram:200x255 mmrapid feed cross beam:350 mm/minpower maindrive:55 kWWeight approx.:32/35/37|35/38/40|36/40/42|43/45 tface plate:siehe oben Rams:2 Stk.CNC controls from:Siemens/Fanuc turret:4-/6-fach, elektrisch

:KDM-K 40 | KDM-K 50 faceplate diameter:3150/3500|4000/4500 mmswing diameter:4000|5000 mmturning height:2500/3150/4000|2500/3150/4000 mmmax. torque on the faceplate:100000 Nmmax. workpiece weight:32/50/83 ttable speeds:2 ? 40 1/minTravel of Ram (vertical):1300/1600/2000 mmTravel of ram (horiz.):2250 | 2800 mmrapid traverse X-axis:3|4 m/mincross section of ram:200x255 mmrapid feed cross beam:350 mm/minpower maindrive:55|75 kWWeight approx.:58/75/115 |58/75/115 tface plate:siehe oben Rams:2 Stk.CNC controls from:Siemens/Fanuc turret:4-/6-fach, elektrisch

faceplate diameter:4700/5700 mmswing diameter:6300 mmturning height:3150/4000 mmworkpiece weight:63/100 ttable speeds:0.2-32 U/min (2 Stufen) max. torque:400 KNmslide stroke:vertikal: 1600/2000 mmslide stroke:horizontal: 3400 mmcross section of ram:240x240/280x280 mmCross rail travel :2000 mmrapid feed cross beam:300 mm/minfeed stepless:X-Achse: 1-500 mm/minmain drive:90/110 kWweight of the machine ca.:110/170 tMachine size (LxWxH):9000x7000x8000 mmcontrol:Siemens/Fanuc/Fagor worktool support (A-axis):2 Stück:1 StückRams:1 Stück konventioneller und 1 Stück CNC-Stößel CNC controls from:Siemens/Fanuc/Fagor for more information please check attached pdf file on the right hand side

faceplate diameter:6300 mmswing diameter:8000 mmturning height:4000 mmworkpiece weight:120 ttable speeds:0.2-16 U/min (2 Stufen) max. torque on the faceplate:200/460 k.Nmslide stroke:vertikal: 2500 mmslide stroke:horizontal: 4350 mmcross section of ram:280x280 mmMax. cutting force of tool head :links: 63 kN / rechts: 80 kN Cross rail travel :2000 mmrapid feed cross beam:300 mm/minfeed stepless:X-Achse: 1-500 mm/minmain drive:110 kWweight of the machine ca.:190 tMachine size (LxWxH):11000x9000x8000 mmcontrol:Siemens 828D/Siemens 840D worktool support (A-axis):2 Stück:1 StückRams:1 Stück konventioneller und 1 Stück CNC-Stößel CE-design:inkl. Zertifikat European electric:Schneider, Siemens, ABB oder ähnlich Servo motors:von Siemens SPS machine control:von Siemens CNC controls from:Siemens/Fanuc/Fagor for more information please check attached pdf file on the right hand side

:FB-15 | FB-20 | FB-25 | FB-30 turning diameter:1500|2000|2500|2500 mmfaceplate diameter:1500|2000|2500|2500 mmturning length:330 mmmax. workpiece length:450 mmbed width:450 mmmax. workpiece weight -without tailstock:3000 kgwidth of cross cariage:250 mmspindle bore:155 (230 opt.) mmspindle nose:A2-11 (A2-15 opt.) spindle cone:7 MKspindle speed:4-600|4-600|4-400|4-400 1/minspindle speed steps:4 cross way of carriage:330 mmmovement longitudinal:1000|1000|1500|1500 mmspindle drive:22 (29 opt.) kWservo motor X-axis:ß12/3000i 1.8kw |ß12/3000i 1.8kw|1FL6067 2.0kw|1FL6067 2.0kw servo motor Z-axis:ß22/3000i 3kw |ß22/3000i 3kw |1FL6092 3.5kw|1FL6092 3.5kw ball screw:Ø25mm x P5 x C3 (X-Achse) ball screw:Ø40mm x P10 x C5 (Z-Achse) mmrapid power traverse in X-and Z direction:6/8 m/minnumber of tools:4 tool post size:32x32 mmweight of the machine ca.:7000|7500|8000|10000 kgMachine size (LxWxH): ...

turning diameter over bed:630 mmturning diameter over slide rest:360 mmturning length:2000 mmcentre distance:2500 mmspindle turning speed range:22,5 - 1120 U/minspindle motor:15 kWfeeds - cross:0,018 - 1,25 mm/Uweight of the machine ca.:6,0 ttotal power requirement:19 kWdimensions of the machine ca.:4,0 x 1,4 x 1,6 mMachine equiped with:- Heidenhain digital readout- 2 steady rests- rapid traverse- 3-jaw chuck, faceplate- splash cover- Multifix rapid tool changing system

turning diameter:670 mmturning length:3000 mmcontrol:840 z-axis:3150/3000 Z+ mmx-axis:700/260 X+ mmb-axis:-110/+90 °c-axis:0,001 °main drive motor:60/40 kWspindle turning speed range:2600/3300 U/minspindle diameter in front bearing:160 mmspindle bore:115 mmlower slide:2 x 12, VDI 40 upper slide:25 KWno. of tools in the magazine:90 Stückwotkpiece diameter with 2 vacant positions:200 mmtool length - max.:900 mmtool taper:HSK 100/ VDI 40 rapid traverse::15/20 m/minweight of the machine ca.:35 ttotal power requirement:140 kWdimensions of the machine ca.:13 x 4,5 x 3,6 mCNC Turninig-Boring-Milling Center with opposed spindles and 2 saddles- SIEMENS 840 C safety integrated control for 8 axis- Left/Right spindle with C-axis, KNCS 400 mm power chucks- Lower saddle with 2 x 12-fold revolving heads- Turning,- boring,- milling unit on top saddle, HSK 100 tool taper, 25 kW drive motor, 10-4000  ...

faceplate diameter:6000 mmswing diameter:6500 mmturning height:3000 mmslide stroke:2500 mmcross rail adjustment - vertical:1800 mmfaceplate turning speed range:0,40 - 78 U/minworkpiece weight max.:80.000 kgmain drive motor:150 kWtotal power requirement:180 kWweight of the machine ca.:160 tdimensions of the machine ca.:15 x 10 x 8,7 ü.F. mwith CNC NUM 1060hydrostatic guideways6000 mm power chuck C-axis driven tooling SK 50 / 30 KW / 6 - 2000 rpm.angular milling headautomatic toolchanger 50 pockets turning toolholders CAPTO C 6 / 47 Milling toolholders SK 50coolant attachment and chip conveyor

Modell:SDM 630 | SDM 800 | SDM 1000 | SDM 1200 turning diameter over bed:630 | 800 | 1000 | 1200 mmturning diameter over slide rest:345|480|680|880 mmturning length:1000,2000,3000,4000,5000,6000,7000,8000~12000 mmtravel of cross-slide cross:370|420|520|620 mmmovement of the upper support:200 mmbed width:600 (Monoblock) mmspindle bore:105mm (130 oder 155 opt.) mmspindle nose:DIN 55029 Größe11 oder DIN 55027 Größe 11 spindle taper:Ø120mm/Konus 1:20 spindle speeds:7.5~1000|5,5~730|5,5~730|5,5~730 1/minmetric threading:1~240 mmfeeds - longitudinal:0.1~24,3 mm/minfeeds - cross:0.05~12,5 mm/minrapid traverse longitudinal and cross:4000, 2000 mm/minturning tool - shaft cross cut:32 x 32 mmtailstock quill diameter:100 mmtailstock quill stroke:240 mmtaper in tailstock:6 MKmain drive motor:11 (15 kw opt.) kWmax. workpiece weight between centers:3000 kgWeight approx.:4t bei Spitzenw. 1000mm ( ...

:YS-VL-1000 | YS-VL-1200 | YS-VL-1600 | YS-VL-2000 faceplate diameter:1000|1250|1600|2000 mmswing diameter:1350|1600|2000|2500 mmturning height:1070|1350|1350|1700 mmmax. turning diameter:1150|1350|1800|2300 mmtable load:4|5|8|10 ttable rotation speed:2 - 600 | 2 - 300 | 2 - 250 | 2 - 200 U/minmax. torque on the faceplate:10000|12500|18500|54000 NmTravel of Ram (vertical):800 | 900 | 900 | 1000 mmTravel of ram (horiz.):1350 | 1475 | 1650 | 2275 mmram head dimension:230 x 230|250 x 250|250 x 250|280 x 280 mmrapid power traverse in X-and Z direction:10/12|10/12|10/12|10/10 m/minfeeds:0,1 - 50 mm/Ufeed speeds:0 - 1260 mm/minTool changer:12 (C-Achse mit 16) drive capacity - spindle motor:37/45| 37/45 (60/75 opt.)| 37/45 (60/75 opt.)| 37/45 (60/75 opt.) kWMachine height: 5330 |5500 |5500|6600 mmmachine length:4600 |4700 |5050| 4950 mmmachine width:5500 |5800 |6300|7320 mmweight of the mac ...

:YS-VL-3000 faceplate diameter:3000 mmswing diameter:3500 mmturning height:1650 mmmax. turning diameter:3400 mmtable load:40 ttable rotation speed:2-40/41-120 U/minmax. torque on the faceplate:64500 NmTravel of Ram (vertical):1000 (1400 opt.) mmTravel of ram (horiz.):2775 mm ram head dimension:280x280 mmrapid power traverse in X-and Z direction:10/10 m/minfeeds:0,1 - 50 mm/Ufeed speeds:0 - 1260 mm/minTool changer:12 (C-Achse mit 16) tool taper:SK50/BT50 drive capacity - spindle motor:60/75 (75/100) kWMachine height:6700 mmmachine length:6100 mmmachine width:8700 mmweight of the machine ca.:69000 kgrepeating accuracy:0,005 mmhydraulic motor:3,75 kWservo motor X-axis:7 kwservo motor Z-axis:7 kwcoolant pump drive:2,2+1,1 kW:150 kvaCNC controller:Siemens/Fanuc/Fagor coolant system:700 Literautomatic tool changer:16-fach 4-jaw faceplate Ø:s. oben CNC controls from:Siemens/Fanuc/Fagor ATC:320 ...

turning diameter:920 mmturning length:2034 mmcontrol:4 x-axis:1025 mmz-axis:2100 mmb-axis:240 °c-axis:360.000 x 0,001 °y-axis:650 mmw-axis:2000 mmspindle drive motor:35 kWspindle turning speed range:1 - 1600 U/minspindle bore:170 mmrapid traverse feeds:40000 mm/minwork piece power:37 kWtool taper:CAPTO C 8toolpiece turning speed range:1 - 10000 U/mintotal power requirement:125 kVAweight of the machine ca.:26,5 todimensions of the machine ca.:8,5 x 3,2 x 3,9 mMachine with MATRIX CNC control- Workpiecespindles with W and C-Axis- Milling unit with B and Y axis- 2 power chucks KITAGAWA 650 mm- tool changer for 80 tools- Renishaw probe tester- coolant through spindle- coolant device, chip conveyor