tornos usadas para la venta

:KVL-450 | KVL-600 | KVL-800| KVL-1100 turning diameter:450|600|800|1100 mmswing diameter:550|650|1000|1250 mmturning height:450|500|750/950|1000 mmspindle nose:A2-8|A2-8|A2-11|A2-15 table rotation speed:50-2500|50-2250|20-1500|20-600 U/minTravel of Ram (vertical):450|500|800 / 1000 (Opt.)|1000 mmTravel of ram (horiz.):300|340|500|700 mmrapid power traverse in X-and Z direction:20/24|20/24|20/20|10/10 m/minTool changer:8/10/12 mit vertikaler oder horizontaler Scheibe tool taper:VDI40/VDI50 oder Schaftaufnahme drive capacity - spindle motor:11/15|15/18.5|18.5/22|37/45 kWMachine height:2600|2910|4020|4605 mmweight of the machine ca.:4500|6000|13000|18000 kghydraulic motor:2,2 kWservo motor X-axis:1,6|1,6|4|7 kwservo motor Z-axis:3|3|7|7 kwcoolant pump drive:0,75+1,1|0,75+1,1|0,75+0,75+1,1|0,75+0,75+1,1 kW:35|40|50|70 kvaCNC controller:Siemens/Fanuc/Fagor CNC controls from:Siemens/Fanuc/Fag ...

turning diameter over bed:630 mmturning diameter over slide rest:360 mmturning length:2000 mmspindle speeds::22,5 - 1120 centre distance:2500 mmfeeds - cross:0,018 - 1,25 mm/Uspindle motor:15 kWtotal power requirement:18 kWweight of the machine ca.:6,0 tdimensions of the machine ca.:3,6 x 1,4 x 1,7 m- Heidenhain digital readout- rapid traverse- Multifix quick tool change with inserts- faceplate- 2 steaday rests, 3-jaw chuck- splash protection

faceplate diameter:4000 mmswing diameter:5000 mmturning height:2500 mmmax. turning diameter:5000 mmtable load:40 ttable rotation speed:0,1-80 (2-stufig) U/minmax. torque on the faceplate:108000 NmTravel of Ram (vertical):1800 mmTravel of ram (horiz.):-2500~+2900 (aus Tischmitte) mmram head dimension:300x300 mmspindle speed:10-2500 (2-stufig) 1/minspindle taper:50 SKrapid power traverse in X-and Z direction:10/10 m/minfeed speeds:1-3000 mm/minCross rail travel :1680 mmTool changer:12-fach für rechten Stößel (für Drehwerkzeuge) Tool changer:60-fach für linken Stößel (für Fräswerkzeuge) tool taper:SK50/BT50 Machine height:s. Anlage mmmachine length:s. Anlage mmmachine width:s. Anlage mmdrive capacity - spindle motor:18,5/22 kWcoolant pump drive:3 kWservo motor X-axis:9 kwservo motor Z-axis:9 kwtable drive:100 kW:300 kvapositioning accuracy:0,01/500 mmrepeating accuracy:+/-0,008 mmC ...

faceplate diameter:5000 mmswing diameter:5200 mmturning height:3000 mmmax. turning diameter:5200 mmTravel of Ram (vertical):1500 mmTravel of ram (horiz.):+/- 2500 mmram stroke speed:15000 mm/mincutting capacity:150000 Nm in X-/Z-Achse ram head dimension:400 x 400 mmCNC controller:Siemens/Fanuc/Fagor Rams:2 Stk.Scales:v. Heidenhain servo motors:Siemens/Fanuc/Fagor CNC controls from:Siemens/Fanuc/Fagor ATC:32/60/90 fachChip ConveyorCoolant TankOil/Water SeparatorMachine Cover (High guarding)Heat exchanger For Electrical CabinetAuto Lubrication for Guide way4 Jaw Manual Chuck 1600mmHydraulic UnitBT50 Tool Connection in RAMMetal frame and case in machine shipment packing(Wooden packing with metal base)3 colors Warning LightChamber lightAnti- Dropping in Z axis -- Auto Motor Brake SystemOptions InstalledAir Conditioner For cabinetCoolant Through Spindle Filter for Coolant Water CE Mark Tran ...

turning diameter over bed:400 mmturning diameter over slide rest:250 mmturning length:1000 mmmax swing over gap:520 mmHeight of centres:200 mmcrossed path:230 mmbed width:218 mmmain spindle bore:52 mmspindle size:MK 6 speeds::55-2000 U/minturning angle of tool post:90 gradtail stock:50 mmtaper in tailstock:MK 4 threading metric:0,4-7 mmthreading WHITWORTH:4-60 TPI total power requirement:2,2 kWdimensions of the machine ca.:1940 x 820 x 1545 mmweight of the machine ca.:750 kgtailstock quill:110 mmtapping modul:0,4-3 mmtapping diametral:8-84 Gang/Zoll

turning diameter:500 mmturning length:1000 mmcontrol:MANUAL PLUS Grundig total power requirement:24 kVAweight of the machine ca.:2650 kgdimensions of the machine ca.:2500 x 1750 x 1850 mmswing diameter over face slide:290 mmchuck:Ø max. 260 mmcross movement:260 mmspindle head:DIN 55027 Größe 8 spindle bore diameter:70 mmrapid travel - longitudinal/face:8 /6 m/minspindle speeds::8 - 2800 tailstock travel:180 mmtailstock quill taper MT:5 Documents:vorhanden

turning length:800 mmtotal power requirement:380 Vweight of the machine ca.:1400 kgdimensions of the machine ca.:2200 x 1200 x 1300 mcentre height:160 mmchucking diameter:150 mm ... más información

turning diameter over bed:240 mmturning length:450 mmtotal power requirement:0,5 kWweight of the machine ca.:120 kgdimensions of the machine ca.:1500 x 600 x 1200 mmcentre height:120 mmspindle bore:21 mmrevolutions per minute: 75 - 2980 U/min ... más información

Modell:5-800 | 5-1000 | 5-1200 | 5-1400 turning diameter over bed:800|1000|1200|1400 mmturning diameter over slide rest:510|710|910|1110 mmturning length:3000~12000 mmDistance between centres:3000~12000 mmcentre height:500 mmbed width:900 (opt. 1200) mmspindle bore:155 (A2-11) mmspindle turning speed range:6-800 U/minspindle speed steps:variabel innerhalb der Stufe, 4 Stücktailstock quill taper MT:6 MKdiameter of quill:165 mmquill travel:250 mmspace requirements approx. LxWxH:10.800x2.200x1925 (8m Spitzenweite) mmmachine weight:18200 (8m Spitzenweite) kgspindle drive:30 kWtool holder:manuell schwenkbarer 4-Fach Stahlhalter für Stahlhalterquerschnitte 32x32mm thread chasing dial:keine fixed steady:feststehende Lünette, Durchmesser 60 bis 290mm

turning diameter:480 mmturning length:1250 mmcontrol:H 645 weight of the machine ca.:8 tdimensions of the machine ca.:5 x 2 x 2 mcentre distance:1580 mmswing over bed:495 mmswing diameter:üb.Querschlitten ca.350 mmworking area:1600 mmcontrol:H645 connected load:50 kW ... más información

:SDM-1460 | SDM-1660 | SDM-1860 | SDM-2060 turning diameter over bed:1460 | 1660 | 1860 | 2060 mmturning diameter over slide rest:960 | 1160 | 1360 | 1560 mmturning length:2000/3000/4000/5000/6000/8000/10000/12000 mmbed width:1180 mmworkpiece weight:20 tspindle bore:105 mmspindle taper:140 spindle speed:3-200 1/min, 4 stufig metrical thread cutting:1~60 mmlongitudinal feeds:0.1~6 mm/Uface feeds:0.05~3 mm/Urapid traverse longitudinal:3400 mm/minrapid traverse cross:1700 mm/mincross way of carriage:750 | 850 | 950 | 1050 mmmovement of the upper support:280 mmtool size:45 x 45 mmtailstock quill diameter:280 mmstroke:300 mmtailstock-quill conus:100; 1:7 metrischspindle motor:55 kWtool holder:4-fach steady diameter:250-600 mmCNC controls from:Siemens/Fanuc/Fagor payment: 100 % before loadingwarranty:12 months on parts onlyBRANDNEW conventional heavy duty center lathe

control: Numeriksteuerung CNC 700 K total power requirement:28 KVAweight of the machine ca.:7,8 tdimensions of the machine ca.:6610 x 2280 x 2235 mmwork height max.:1060 mmgreates pass round over bed:305 mmspindle bore:82 mmDocuments:vorhanden  ... más información

turning length:630 mmtotal power requirement:16 kWweight of the machine ca.:5 tdimensions of the machine ca.:3400 x 1500 x 1600 mmswing diameter over slide rest:Hinterdrehschlitten 250 mmcentre height:über Hinterdrehschlitten 150 mmcenter height over bed:300 mmturning spindle:Kopf DIN 55021 Gr. 8 centre distance:1000 mmaccessories::2 Schränke Wechselräder

number of spindles:8 spindle passage:130 mmCam controlled multi spindle automatic lathe, used8 main spindlesChucker AFH130 for complete machining means front- and back sideControl Siemens Sinumerik 840DIcomplete revising and new configuration of this machine in year 2010.loading arm, for loading and disloading Workpiece turn around station in pos. 4 position 4 with workpiece length controlCNC compound slide in pos. 5coolant pump with magnet candle filtertooling: could be different like pictures option:Ergomat TB42 fot cutting off for half finnishing with FMB-TurboIrrtum und Zwischenverkauf vorbehaltenVisiting under production condition possiblePlease, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

Modell:SDM 850 Varia | SDM 1000 Varia turning diameter over bed:850|1000 mmturning diameter over slide rest:520|720 mmcentre distance:2000/3000/4000/5000/6000 mm:1150|1350 mm:350 mmtravel of cross-slide cross:600 mmmovement of the upper support:250 mmbed width:600 (Monoblock) mmspindle bore:100 mmspindle nose:DIN 55029 Größe11 spindle taper:Ø120mm/Konus 1:20 spindle speeds:5~630 1/mintool holder -shaft diameter:45 mm:90° feeds - longitudinal:0,08~9,6 mm/minfeeds - cross:0,04~4,8 mm/minrapid traverse longitudinal and cross:3640/1800 mm/min:900 mm/minmetric threading:56, 1~120 mmtailstock quill diameter:120 mmtailstock quill stroke:250 mmtaper in tailstock:6 MKmain drive motor:15|18,5 kW:16,8|20,3 Kvamax. workpiece weight between centers:4000 kgWeight approx.:7200 kgmachine width/height:1600x1600 mmmachine length:6150 mm (4000 mmSpitzenweite) 4-jaw independent chuck:800 mm3-Axis DRO:SI ...

turning diameter:500 mmturning length:1000 mmcontrol:MANUAL PLUS Grundig total power requirement:24 kVAweight of the machine ca.:2650 kgdimensions of the machine ca.:2500 x 1750 x 1850 mmswing diameter over face slide:290 mmchuck:Ø max. 260 mmcross movement:260 mmspindle head:DIN 55027 Größe 8 spindle bore diameter:70 mmrapid travel - longitudinal/face:8 /6 m/minspindle speeds::8 - 2800 tailstock travel:180 mmtailstock quill taper MT:5

number of spindles:8 spindle passage:67 mmCam controlled multi spindle automatic lathe, used8 main spindlespick up in pos. 8threading attachmentCNC compound slide in pos. 5, also 2. speed in pos. 2Hydraulic spindle brake in pos. 4Incl. length measurement, incl. Brankamp cutting force monitoringtooling: could be different like picturesPlease, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

turning length:2000 mmcontrol:- total power requirement:25 kWweight of the machine ca.:3 tdimensions of the machine ca.:3800 x 1800 x 1850 mmswing over bed:500 mmswing diameter over face slide:280 mmcontrol:Zyklen-Steuerung Heidenhain bed width:350 mmDocuments:vorhanden  ... más información

turning diameter over slide rest:280 mmturning length:4000 mmtotal power requirement:7,8 kWweight of the machine ca.:6 tdimensions of the machine ca.:5,9 x 1,9 x 1,40 m ... más información

number of spindles:6 spindle passage:67 mmcam controlled multi spindle automatic lathesix main spindles D=67mmThis is a sample imagePlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com ... más información