tornos usadas para la venta

Spindle clearance: 42mm, turning diameter over face slide/bed: 170/400mm, speed: 56-5600rpm, control: TX 8F. With four driven tools, various tool holders VDI30, high-pressure pump 15bar, measuring arm for tool measurement. Operating hours: 38,274h, Baumüller drive BUH-4-55-6-002 produces an error message and must be overhauled. On-site inspection is possible.

:KTH 400 | KTH 500 turning diameter:805 | 1010 mmturning length:1000/2000/3000/4000/5000 mmcontrol:Siemens/Fanuc/Fagor max. swing over slide:515 | 718 mmbed width:425 | 500 mmspindle taper:A2-8 (opt. A2-11, A2-15 oder A2-20) spindle bore:105 (opt. 155/230) | 130 (opt. 155/230/310) mmtransmission ratio:2 feed range:0-8500 (Z-Achse), 0-6000 (X-Achse) mm/minrapid traverse x/z:7,5/10 m/mintailstock quill diameter:106 | 120 mmtailstock quill stroke:215 | 300 mmtaper of tailstock quill:6 MKpower requirement:17 | 22 kWautomatic tool changer:8-fach mit 4-Werkzeughaltern CNC controller:Siemens/Fanuc/Fagor tools:1 Satz :aus massiven Gusselementen CNC controls from:Siemens/Fanuc/Fagor New CNC lathe KRAFT ST 500/3000 with Fanuc Oi TDMade in EuropeFor more information please see the attached documents

Controls: Siemens C200-4 D, has been regularly serviced, with documentation and accessories, the machine can be inspected on site. ... más información

:JAP 500 turning diameter:1010 mmturning length:2000/3000/4000/5000 mmcontrol:Siemens/Fanuc/Fagor max. swing over slide:718 mmbed width:500 mmspindle taper:A2-11 (opt. A2-11, A2-15, A2-20) ASAspindle speeds:0-1400 (opt. 0-1000, 0-750, 0-560) 1/min.spindle bore:130 (opt. 155,230,310) mmtransmission ratio:2 feed range:0-8500 (Z-Achse); 0-6000 (X-Achse) mm/minrapid traverse x/z:7,5/10 m/mintailstock quill diameter:120 mmtailstock quill stroke:300 mmtaper of tailstock quill:6 MKpower requirement:17 kWweight of the machine ca.:6400/7600/8800/10000 kgdimensions of the machine ca.:4600/5600/6600/7600 x 2270 x 2290 mm:gem. 8605 DINautomatic tool changer:8-fach (Schaft: 32x32mm und Bohrstange:Ø50mm), Hersteller Duplomatic oder Barufaldi mit 4 Haltern CNC controller:Siemens 828D/Fanuc 0iTF/Fagor 8060T tools:1 Satz gear box:von Barufaldi, 2-stufig spindle:Hochpräzisionsspindel CNC controls from: ...

turning diameter:1000 / 700 mmturning length:3000 mmface slide travel:600 mmturning diameter over slide:700 mmturning speeds:1-1.800 1/mintransmission ratio:2 spindle:46 (60%) kWspindle bore:132 mmquill stroke:280 mmworkpiece weight max.:2.560 kgtotal power requirement:38 kWweight of the machine ca.:6 tdimensions of the machine ca.:5 x 2,6 x 1,9 mteach in lathe,PARAT tooling system,SCHUNK ROTA NC 500-160 power chuck,tailstock,chipconveyor

X-travel: 425mm, swing/ over bed/ slide: 970/ 710/ 370mm, spindle rotational speed: 125-1480/min, max. load: 3t, width: 2630mm, height: 2170mm, with tools, was maintained regularly, an inspection is possible. ... más información

turning diameter:900 turning length:1986 mmcontrol:FANUC 18 iTB turning diameter over slide:680 mmturning speeds:1800 1/minturret (x-stations):12 power capacity:37 / 30 kWcentre distance:2050 mm:1 / 12 x BMT :116 mmtotal power requirement:45 kWweight:15,0 tdimensions of the machine ca.:5,30 x 2,60 x 2,40 mHeavy CNC lathe with c Axis and driven toolstailstocktool eye chipconveyordriven tools ( on 6 stations ) hydraulic staedyhydraulic 3-chaw-juck D= 600 mm oil mist model IFMmanuals15 sets of chaws15 pcs of toolholder 2 pcs of driven toolholder we have 2 machines of this model for sale !

Center height: 360mm, bed width: 430mm, turning length: 1500mm, with documentation. ... más información

turning diameter:256 mmturning length:455 mmswing diameter over slide rest:260 mmtravel -x axis:198 mmtravel -z axis:508 mmturning speed range - main spindle:4800 1/minpower capacity - main spindel:18 / 11 kWC-Axis:0,01 °turret (x-stations):12 x VDI 30 PosNumber of driven tools:6 Postool taper:VDI 30 Spindle speed driven tools:5000 min -1spindle hollow:52 mmrapid power traverse in X-and Z direction:30 m/minpower capacity - driven tools:4,4 kWtotal power requirement:25 kVAweight of the machine ca.:4 to.dimensions of the machine ca.:3,1 x 2,3 x 2,2 mCNC lathe with tailstock,12-Pos. turret (6 pos. for live tools), chipconveyor,hollow clamping cylinder,graphic simulation and collission check,ethernet, USB,chipconveyor,parts catcher,tooleye,flush gun,collet chuck KITAGAWA CRL60A6,tailstock manually, quill programable,LED light,machining of plastic material only!hour meter: approx. 18.000h "m ...

CONTROLS  CNC Teach In Controls NUM 1062 BASIC FUNCTIONS  number of x/z slides: 1   live positions: no WORKING RANGE TURNING  swing diameter (max): 570 mm  turning diameter (max): 365 mm  worpiece length max.: 1000 mmMAIN SPINDLE  spindle revolutions (min): 3 /min  spindle revolutions (max): 2500 /min  number of gears: 2   spindle diameter: 62 mmX/Z SLIDE  traverse velocity Z (min): 0 mm/min  traverse velocity Z (max): 10000 mm/min  traverse velocity X (min): 0 mm/min  traverse velocity X (max): 5000 mm/min  tool fixture: Steel Holder TAILSTOCK  taper: MK 5 ELECTRICAL SPECIFICATIONS  mains power supply: 35 kVA  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space require ...

A single-spindle pick-up lathe is available, max. swivel diameter: 130mm, spindle in front bearing: 90mm, max. chuck diameter: 160mm, weight: 10t, operating hours: approx. 88,000h, with documentation, an on-site inspection is possible. ... más información

bar material dia.:10 mmturning length:105 mmturning speeds:15.000 / 10.000 U/minnumber of tools:30 (3 x 10) driven tools:ja / yes control:FANUC 18i-TB total power requirement:3,5 kVAweight of the machine ca.:1,5 tdimensions of the machine ca.:1,9 x 0,8 x 1,7 mtoolpiece turning speed range:8.000 1/minmain spindle power:3,7 kWsub spindle power:1,1 kWCNC sliding headstock machine,subspindle,7 axis (X1, Z1, Y1, C1, X2, Z2, C2),barloader LNS TRYTON 112 A-B,Fireextinguisher KRAFT und BAUER,parts-ejector,coolant tank,machining with oil as coolant,reading hours:approx. 38.000 hours "machine on", approx. 27.000 hours "machining"

CONTROLS  CNC controls FANUC 18 T BASIC FUNCTIONS  number of spindles: 1   number of turrets: 1   live positions: yes   number of c-axes: 1 WORKING RANGE TURNING  swing diameter (max): 700 mm  turning diameter (max): 700 mmMAIN SPINDLE  spindle revolutions (max): 3500 /min  spindle bore diameter: 91 mm  c-axis: yes COUNTER SPINDLE  Z-axis travel: 1105 mmX/Z SLIDE  X-axis travel: 362 mm  tool fixture: Turret   number of tool positions (total): 12 TOOL MAGAZINE  number of positions: 12 ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 4820 mm  space requirements -front/back-: 3200 mm  total height: 2300 mm &n ...

Turning length: 250mm, center height: 240mm, swing/ over slide: 280/ 185mm, operational hours counter: 55,325h, with documentation, without tools, was maintained regularly, an inspection is possible. ... más información

CONTROLS  CNC controls MAZATROL 640 MT BASIC FUNCTIONS  number of spindles: 2   live positions: yes   number of c-axes: 2   number of y-axes: 1   number of b-axes: 1 WORKING RANGE TURNING  turning diameter (max): 540 mm  bar diameter (max): 51 mm  worpiece length max.: 1029 mmMAIN SPINDLE  spindle revolutions (max): 5000 /min  c-axis: yes COUNTER SPINDLE  c-axis: yes X/Z SLIDE  Z-axis travel: 1065 mm  X-axis travel: 530 mm  Y-axis travel: 140 mm  rapid traverse Z: 33000 mm/min  rapid traverse X: 30000 mm/min  rapid traverse Y: 15000 mm/min  - rotation speeds (max): 10000 /minTOOL MAGAZINE  magazin type: chain magazine   number of positions: 80 ELECTRICAL SPECIFICATIONS &n ...

Connected load: 58.5kVA, operational hours counter: 50,559h, with documentation, without tools, was maintained regularly, an inspection is possible. ... más información

turning diameter:80 mmturning length:235 mmmax. bar capacity:42 mmpower capacity - driven tools:1 kWspeeds spindle 1:6000 1/minspeeds spindle 2:5000 1/minnumbers of turret head positions:8 posdrive capacity - spindle motor:SP1 11 / SP2 5,5 kWTools speed:60-6000 1/minweight of the machine ca.:ca. 3 tdimensions of the machine ca.:2,4 x 1,5 x 1,6 mHigh Performance CNC Turning- and Milling Center - chipconveyor- subspindle- live tools- C-axis- brake- partscatcher and partsconveyor- tool eye- barloader LNS HYDROBAR MINI-SPRINT approx. 5000 working hours

CONTROLS  CNC Teach In Controls SIEMENS BASIC FUNCTIONS  design principle: flatbed   number of spindles: 1 WORKING RANGE TURNING  swing diameter (max): 720 mm  turning diameter (max): 380 mm  bar diameter (max): 108 mm  worpiece length max.: 1500 mmMAIN SPINDLE  spindle revolutions (min): 0 /min  spindle revolutions (max): 1200 /min  number of gears: 3   spindle bore diameter: 108 mmX/Z SLIDE  traverse velocity Z (max): 5000 mm/min  traverse velocity X (max): 5000 mm/min  rapid traverse Z: 5000 mm/min  rapid traverse X: 5000 mm/min  tool fixture: Steel Holder TAILSTOCK  distance betw. centers (max): 1500 mm  sleeve stroke: 200 mm  sleeve diameter: 120 mm  taper: MK 6 ELECTRICAL SPECIFICATI ...

A single-spindle pick-up lathe is available, max. swivel diameter: 250mm, working spindle nose: ASA 6 inch, spindle in front bearing: 110mm, max. chuck diameter: 250mm, weight: 13t, operating hours: approx. 82,400h, with documentation, an on-site inspection is possible. ... más información

turning diameter:620 mmturning length:1000/1500/2000/3000 mmcontrol:Fanuc/Fagor/Siemens max. swing over slide:540 mmbed width:350 mmspindle taper:As-8 spindle speeds:0-2500 1/min.spindle bore:105/155 mmtransmission ratio:1 tailstock quill diameter:95 mmtailstock quill stroke:220 mmtaper of tailstock quill:5 MKmax. length of work piece:1000/1500/2000/3000 mmrapid traverse x/z:15/12 m/minpower requirement:11 kWweight of the machine ca.:2300/2515/3010/3700 kgautomatic tool changer:8-fach electric handwheel:x-/z-Achse New CNC lathe KRAFT ST 310 Series with Fanuc/Fagor/Siemens controlMade in EuropeFor more information please see the attached documents