tornos usadas para la venta

turning diameter over bed: 2500 mmturning diameter over slide rest: 3000 mmturning length: 5000 mmtotal power requirement: 12 kWweight of the machine ca.: 30 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

Qty. 1 Second-hand roll lathe Mfc.: Herkules Type: WD-700 Built: 1952 General overhauled by Hoesch-MFD in 1990 Centre height: 600 mm Turning length: 2750 mm 2-axis digital display – Mfc.: Micro Wizard Longitudinal drive Standstill torque: 14 Nm Rated revolution: 2500 RPM Feeding range: 5 – 100 mm/min. Rapid speed: 2500 mm/min. Plain drive Standstill torque: 14 Nm Rated revolution: 3000 RPM Feeding range: 5 – 100 mm/min. Rapid speed: 2500 mm/min.

Point lathe SU 63 A in good condition Machine weight: 5600 kg Circulating diameter above the bed: 630 mm Revolving diameter above support: 360 mm Distance between spikes: 2000 mm ... más información

Distance between lathe tips: 25 000 mm Swing over bed: 1800mm Speed: 0,45-91 rpm Workpiece weight: 70t Control system: CNC SIEMENS Sinumerik 840 Main motor power: 80 kW ... más información

turning diameter over bed: 540 mmturning diameter over slide rest: 270 mmturning length: 2500 mmspindle passage: 60 mmturning speeds: 600 U/minRapid travel: steady for max. workpiece diameter from: 270 mmsteady for max. workpiece diameter from: 170 mmfaceplate: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ref. -No.: 10229Manufacturer: GÖPPINGERYear of construction: 1953Type of control: KonventionellControl: N/aStorage location: HalberstadtCountry of origin: DeutschlandMachine length: 4700 mmMachine width: 1450 mmMachine Height: 1300 mmWeight Of The Machine Ca.: 3,1 tSupply voltage: 380 VTurning Length: 3000 mmTurning Diameter Over Bed: 530 mmCentre Distance: 3050 mmSwing Diameter Over Bed Slide: 305 mmSpindle Bore: 58 mmTotal Power Requirement: 5,5 kWCirculation in the crank: 720 mm

Lathe and various small parts Manufacturer: Eugene of white Type: DLNE Year of construction: 1954 Top width: 2000 mm Bed width: 380 mm Bed length: 3410 mm Outer dimensions: 3,850 x 1,020 x 1.135 mm Net weight: approx. 2500 kg maximum speed: 935 RPM maximum speed faceplate: 710 RPM Tour is possible upon request.

serial number: 80131-0271 centre distance: 2000 mmcentre height: 250 mmbore diameter: 63 mmwith digital read-out: K+C Easson10L voltage: 380 V: 220 Vampere: 16 AThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

turning diameter over bed: 650 mmturning diameter over slide rest: 440 mmturning length: 7000 mmcentre height: 330 mmcentre distance: 7000 mmspindle bore: 61 mmøspindle turning speed range: 8 - 800 U/mintotal power requirement: kWweight of the machine ca.: 5,9 tdimensions of machine L x W x H: 8,75 x 1,35 x 1,48 mAccessories: face plate 450 mmø, 4-pos. tool holder, running center, coolant pumpThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Center distance: 3000mm, turning diameter over bed/slide: 520/270mm, spindle bore: 62mm, operating hours: 47,165h, with three steady rests, clamping jaws, rolling center punch, steep taper, drill chuck and tool holder, the oil pump of the gearbox was renewed in 2021. ... más información

Heavy duty lathe, lathe, lathe, center lathe and lathe, center lathe -Manufacturer: Meuser, master and feed spindle lathe type M3A -Turning length: 1400 mm -Swivel Ø over bed: 550 mm -Rotating Ø without bed: 800 mm -Rotating Ø over support: 300 mm -Spindle bore: Ø 58 mm -Spindle speeds: 15 - 810 rpm -Three-jaw chuck: Röhm Ø 250 mm -Faceplate: 500 mm -Accessories: incl. tool holder/tools see photos -Tailstock mount: MK5 -Dimensions: 2770/1070/H1310 mm -Weight: kg

Description: clamping plate diameter: 8000 mm clamping plate diameter with extensions: 12500 mm max. workpiece weight: 200 tons clamping plate speed: 0.35 - 14 rpm smallest turning diameter: 5000 mm cross member without bases: 1040 mm transom with 3 pairs of bases: 5090 mm largest ,distance between the clamping plate and blase side bracket holder: 4200 mm vertical movement of the cross support: right: 3500 mm left: 2550 mm horizontal movement side carrier: 2000 mm vertical movement side carrier: 4000 mm area required: 20000 x 20000 x 12000 mm max. workpiece weight between centers: 200,000 kg, weight approx.: 550,000 kg, Approx. Onsite Dimension. (l x w x h): 20,000 x 12,500 x 11,750 mm

Center height: 360mm, bed width: 430mm, turning length: 1500mm, with documentation. ... más información

The SK 125 carousel is in good technical condition. Can be seen by appointment. Machine weight: 556000 kg Total machine input:: 686 kW Clamping plate diameter: 125 mm Max. workpiece height: 4000 mm Max. workpiece weight: 120 kg Clamping plate speed: 0.35-14 rpm The largest av. lathe. cross and side support.: 12500 mm Avg. clamping plates:: 8000 mm The greatest distance between clamps. plate and knife. side holder support :: 4200 mm Machine dimensions lxwxh: required area 20000x20000x12000 mm

Tip height: about quilt 300 mm centre distance: 1500 mm circular diameter: upper bed 640 mm spindle bore: 67 mm spindle retainer: Gr. 8 taper tailstock: 5 MK spindle speed: 18 - 900 rpm feeds: longitudinal/plan 0.063 0.032 2.1 mm / U thread pitches: 0.5-14 mm electrical connection: 380 V, approx. 7.5 kW space: 1550 x 3100 x 1250 mm weight: approx. 3500 kg hardly used and therefore well-preserved bed lathe

turning diameter over bed: 3050 mmturning diameter over slide rest: 2500 mmturning length: 21200 mmControl: Siemens type: 840D turning speeds: 0,236-60 U/minfaceplate: 3000 mmmain drive motor: 200 kWtailstock quill diameter: 900 mmroll stand: steady: 1200 mmsteady: 1200 mmsteady: 750 mmsteady: 750 mmwith live steady: 2000 mmfaceplate: 2000 mmThickness: 330 mmworkpiece weight: 200 ttotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 3050 mmturning diameter over slide rest: 2500 mmturning length: 21200 mmControl: Siemens type: 840D turning speeds: 0,236-60 U/minfaceplate: 3000 mmmain drive motor: 200 kWtailstock quill diameter: 900 mmroll stand: steady: 1200 mmsteady: 1200 mmsteady: 750 mmsteady: 750 mmwith live steady: 2000 mmfaceplate: 2000 mmThickness: 330 mmworkpiece weight: 200 ttotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lathe H.Ernault 250HN This lathe is brand H. ERNAULT Batignolles type 250HN, it has been used very little, the interpoint is 2m. ... más información

turning diameter over bed: 3200 mmturning diameter over slide rest: 2400 mmturning length: 15000 mmfaceplate diameter: 2600 mmcontrol: Siemens 840 Dsl workpiece weight max.: 80000 kgaccuracy +/-: bis/up to: 0,01 mmspindle motor: 110 kWfaceplate speeds from - to: 0-50 U/mintotal power requirement: - kWweight of the machine ca.: 60 toverhauled and modernized 2009 & 2012/2013equipped with:- CNC control Siemens 840D SL- 2 supports with 1 controller each- 4-jaw face plate - 2 hydraulic steady rests- hydraulic tailstockMachine is dismantled and stored.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Waldrich 10 meter heavy duty lathe with chip conveyor Distance between centers : 10500 mm Max turning diameter: 1,006 mm Maximum clamping grip 1030 mm Working pressure weight: 25 ton Main Motor power: 25 kW ... más información