tornos usadas para la venta

heavy duty lathe for gas turbine and power generating BEST accuracy! max dimeter -2450mm. between centers-9000mm. Weight-110000 kg. ... más información

Romanian lathe type SNA x 3000 mm, man. 1980 the machine is overhauled. The lathe is fully functional. It has a new electrical system and new position readings. It is equipped with: a ruler for turning cones, a lathe chuck fi 315, left and right jaws, LED lighting, cooling system, DTR. Technical data: - turning diameter over the bed [mm]: - 800 - turning diameter over the slide [mm]: - 392 - spindle bore diameter [mm]: - 82 - engine power [kW]: - 18.5 - overall dimensions [mm]: - length: - 5325 - width: - 1510 - height: - 1560 - weight of the machine tool [kG]: about - 5500

turning diameter over bed: 1930 mmturning diameter over slide rest: 1520 mmturning length: 5000 mmturning speeds: 0,5-250 U/minspindle bore: 105 mmworkpiece weight: 35 tsteady: 400-700 mmsteady: 700-1200 mmsteady: 1000-1600 mmcontrol: Siemens total power requirement: 106 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over slide rest: 940 mmturning length: 10000 mmturning diameter: 1250 mmspindle diameter: 105 mmspeed: 1,6 - 315 (x24) m/minvoltage: 380 Vtotal power requirement: 75 kWweight of the machine ca.: tdimensions of the machine ca.: m4-jaw faceplatePower compoundThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description Small universal lathe FAMOT TUM 35 in good working condition. All maintenance and operating instructions and electrical diagram, in French, available Year of manufacture 1980 Between centers 1000 - 380V power supply Spindle speed range 25 - 2500 rpm Bezel, not in photos. Weight 1300kg

Heavy duty lathe, lathe, lathe, center lathe and lathe, center lathe -Remark: the lead screw is missing (for thread cutting) -Manufacturer: Arad Elite, type ES 710 -Distribution: Andras Plum -Turning length: 2120 mm -Swivel Ø over bed: 780 mm -Rotating Ø without bed: 1000 mm -Rotating Ø over support: 400 mm -Spindle bore: Ø 83 mm -Spindle speeds: 8 - 1250 rpm -Three-jaw chuck: Ø 400 mm -Quick change: Multifix steel holder -Tailstock mount: MK5 -Drive motor: 18.5 kW -Dimensions: 4000/1450/H1430 mm -Weight: 4900kg

Gildemeister 6-spindle rotary machine, curve controlled max. rod passage: 32.0 mm for rods up to 3.30 m - incl. rod guide, - Steel processing, run with cutting oel - easily equipped with tools Cmvlgfoyc - 1 set of clamping and feed pliers - Alternating wheels (on machine) - 1 set of curves for cross slides - 1 set of curves for main slide

Gildemeister 6-spindle rotary machine, curve controlled max. rod passage: 32.0 mm for rods up to 3.30 m - incl. rod guide, - Steel processing, run with cutting oel - easily equipped with tools Sowiabeb - 1 set of clamping and feed pliers - Alternating wheels (on machine) - 1 set of curves for cross slides - 1 set of curves for main slide

Schuette Multi-spindle rotary machine Name: Schuette SF 20-6 Curve controlled Number of spindles: 6 Built: 1980 max. rod diameter: around 20 mm SW 17 mm AK 18 mm VK 14 mm max. rod feed: 80 /(160) mm Number of independent Laengsschlitten: 6 Total / working distances (stand): 63/40 mm " " (special) up to: 100/63mm Number of independent cross slides: 6 Total/ work routes Medium and top slide up to: 32/20 mm Slide up to: 40/25 mm Spindle circle diameter: 224 mm Main times min/max.: 0.36/150 sec. Gv29e0 Off times min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 rpm in the 2nd area: 355-2000 rpm Rated power of the drive motor: 15 KW Connected power: 50 kVA Drive engine speed: 1500 rpm Length Width (in standard performance) 3705 1320 mm incl. rod guide (in standard output) 6335 mm Weight without ro ...

Schuette multi-spindle rotary machine SF 26-6 1980 built -with thread cutting device - prepared for centrage suction system - standard Schuetz control D8gdo29 - mechanical gearbox - Balluff cam switch - standard rod guide  ... más información

Thread cutting gear Pick-up device partially revised  ... más información

Lead and Pull Screw Lathe VOEST DA300 Year of construction ca 1980 Turning diameter over bed 600mm Effective turning length: 1850 mm Spindle Passage: 85mm Speeds: 14 - 1000 rpm Tailstock: MK5 Reversal backlash face spindle: 0.5 mm Reversal clearance upper slide: 0.25 mm Rapid traverse bed sledge: in both directions EQUIPMENT - Multifix C - 5 steel brackets - Rotating center tip MK4 - 4 jaw chucks Ø 400mm, plus 3 sets of jaws - 3 jaw chucks Ø 400mm - 3 sets of jaws - Both linings Röhm - Fixed bezel The machine is in good condition. The machine bed is in very good condition.

faceplate diameter: 1250 mmswing diameter: 1650 mmturning height: 950 mmram head dimension: 200x200 mmcontrol: Heidenhain type: Manuel Plus 410total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1600 mmswing diameter: 2100 mmturning height: 1700 mmControl: R & D type: MTC 4 turning speeds: 280 U/minworkpiece weight: 20000 kgTool changer: 14 Pos.: total power requirement: kWweight of the machine ca.: 2800 tdimensions of the machine ca.: 3,7x3,75x5,1 mMachine is modernizedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 330 mmturning diameter over slide rest: 170 mmturning length: 800 mmcentre height: 155 mmcentre distance: 800 mmspindle bore: 38 mmspindle turning speed range: 24 - 2800 U/minspindle head: DIN 55022 Gr. 5 feeds - longitudinal: 0,026 - 1,253 mm/Ufeeds - cross: 0,013 - 0,628 mm/Udia. of leadscrew: 24 mmlead of leadscrew: 6 mmtailstock taper MT: 3 tailstock quill stroke: 110 mmtotal power requirement: 3 kWweight of the machine ca.: 800 kgdimensions of machine L x W x H: 1,80 x 0,70 x 1,23 mAccessories: 3-jaw chuck RÖHM 160 mmø, changing tool post PARAT, solid steady, running center, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 330 mmturning diameter over slide rest: 170 mmturning length: 800 mmspindle bore: 38 mmtailstock quill taper MT: 3 spindle turning speed - stepless: 24 - 2800 U/minlinear traverse of table: 0,026 - 1,253 mmfeeds crossrail-slide horizontal: 0,013 - 0,628 mm/Uquill stroke: 120 mmtotal power requirement: 2,4 / 3,0 kWweight of the machine ca.: 850 kgdimensions of the machine ca.: 1,85 x 0,8 x 1,7 m3-jaw chuck: Qick Toolholders: Machine Lamp: chip protection wall: Lining protection hood: Coolant System: The machine comes from a training company and was maintained more than needed.The general condition is very good, all functions have been checked.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 3200 mmswing diameter: 5100 mmturning height: 2505 mmcross rail - adjustment: 1500 mmmax. ram stroke: 1250 mmslide adjustment: 2000 mmcontrol: Siemens 8 T tool changer: 16 STK table load: 60 tfaceplate turning speed range -stepless-: 0,8-100 U/minfeed: 0,0 1-1000 mm/minrapid traverse: 6000 mm/mindrive of main spindle: 75 kWweight of the machine ca.: 70 tdimensions of the machine ca.: 9,3 x 6,1 x 6,0 mmachine is in an excellent conditionwith div. acessories (photos available)machine can be equipped with latest electrics and Siemens CNC control SINUMERIK 840D sl for additional costs.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

High Quality CNC Lathe Traub TND 360 We offer a precision CNC lathe from the renowned Traub brand. The Traub TND 360 was manufactured in 1981 and allows for efficient and accurate machining, which meets current requirements Technical details: - Diameter: 360 mm - Turning length: 800 mm - Tailstock: MT 3, hydraulically operated - Revolver: 8 stations - Power consumption: 380V, 32 kW This CNC lathe stands out for its reliability and precision, allowing versatile machining of workpieces. The machine needs an inspection due to an unknown problem in the control system. It is also in very good condition and has been regularly maintained. The price is net, free to load. The Traub TND 360 can be viewed by prior appointment. If you have any questions, just call or write. 016096679844 Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Technical specificat ...

The machine was partially overhauled. Built in 1981 Specifications: Center height: 220 mm Center width: 600 mm Spindle bore: 50 mm Bed width: 300 mm Speeds: 31.5 - 1400 rpm Feeds: Longitudinal slide: 0.06 - 0.8 mm/rev Axial slide: 0.044 - 0.6 mm/rev Tailstock mount: MK 4 Gahvxg7a Quill stroke: 120 mm Motor power: 4 kW Weight, approx.: 1500 kg Dimensions (WxDxH), approx.: 2150 x 1100 x 1750 mm Equipment: - 3-axis digital display, Heidenhain brand - 3-jaw lathe chuck - Lathe chuck protection with limit switch protection - Quick-change holder System Multifix - Tension spindle cover - Emergency stop push button - Coolant device - Machine light The following work was carried out: - Machine partially disassembled - Damaged bearings replaced - Guides ground in X- and Z-axis - Tool holder of the tailstock quill ground - Wiper renewed - Partial handwheels r ...

Manufacturer: Schütte Type: ADH 160 Machine No.: 225 Year of construction: 1981 Weight: 11t General / technical data: turning length: 125mm workpiece diameter: 168mm max drilling depth: 125mm Adjustable quantity: from 3.4 to 450 sec. Operating hours: 8.200h Working spindle speed: from 90 – 1120 rpm Installation area (l x w x h): approx. 4730 x 1700 x 2120mm Power Supply: 380V / 50Hz Accessories: 7 cross slides 8 longitudinal slides Tapping device 4x 2-jaw lining Ø160mm Type of lining: Draft chuck with clamping diameter 15 Type of lining: Röhm 0W-406 682 Clamping force 1200 da N 4x 3-jaw lining Ø160mm Type of lining: Draft chuck with clamping diameter 15 Type of feed: Röhm 1W-406 681 Clamping force 1800 da N Insert arm over lining 100mm. The workpiece is fed to the insert arm by a swivel arm and rotary gripper. Rem ...