tornos usadas para la venta

turning diameter over bed: 280 mmturning diameter over slide rest: 155 mmturning diameter in the gap: 350 mmturning length: 800 mmturning speeds: 26 - 2000 U/minspindle bore: 24 mmconnected load: 1,6 kWweight of the machine ca.: 0,7 tdimensions: 1,55 x 0,8 x 1,3 mCenter lathe with- digital display- 4-jaw chuck Röhm 250mm- Multifix steel holder- follow along. Bezel- steady rest max. 135mm- Chip protection wall- Chip tray- coolant system- machine lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 950 mmturning diameter over slide rest: 569 mmturning length: 2200 mmspindle bore: 90 mmfaceplate: 800 mmsteady: 500 bed width: 580 mmRapid travel: turning speeds: 800 U/mindigital readout: stepless reg. with elect. turning speeds: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: 6,5x2x1,8 mChip conveyor can be purchased as an option for €7,500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 440 mmturning diameter over slide rest: 250 mmturning length: 1000 mmspindle bore: 62 mmspindle speed:: 124 - 1400 tailstock quill taper MT: 4 quill stroke: 160 mmmetrical thread cutting: 0,5 - 112 mm/Uthread - inch: 1/4 - 56 inch.total power requirement: 7,5 kWweight of the machine ca.: 2,4 tdimensions of the machine ca.: 2,6 x 1,1 x 1,50 mQick Toolholders: Face plate: 3-jaw-chuck diameter: 3-jaw-chuck diameter: Weipert precision guide and spindle lathe WG 425The machine comes from a training company and has been maintained more thansecond hand.The general condition is very good, all functions have been checked.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Including 3-jaw chuck, Multifix type B base holder, tailstock, documentationDrehlänge: 1,000 mm, turning diameter over bed: 350 mm, turning diameter over slide: 170 mm, spindle bore: 50 mm, weight approx.: 1,800 kg, Approx. Onsite Dimension. (l x w x h): 2,600 x 1,000 x 1,500 mm ... más información

Tip height: 330 mm centre distance: 1500 mm circular diameter: bed 690 mm spindle bore: 82 mm spindle retainer: short taper size 8 taper tailstock: 6 MK spindle speed: 7.1-1400 rpm feeds: longitudinal/plan 0.05 112/0.025 56 mm / U thread pitches: 0.25-560 mm electrical connection: 380 V, 15 kW space: 3350 x 1800 x 1400 mm weight: 4800 kg

in execution with PowerShift Transmission. Tip height 330 mm Top width 1500 mm maximum swing over bed 690 mm Spindle bore 82 mm  ... más información

turning diameter over bed: 2100 mmturning diameter over slide rest: 1300 mmturning length: 6800 mmworkpiece weight: 25000 kgmain drive motor: 140 kWControl: Siemens type: 840 C faceplate: 1100 mmbed width: 2500 mmsteady: 800 mmsteady: 800 mmsteady: 800 mmsteady: 600 mmchip conveyor: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Including faceplate, diameter 1600 mm, tailstock and steady rest , Machine number 3907Drehlänge: 6,500 mm, turning diameter over bed: 2,400 mm, turning diameter over slide: 2,000 mm, spindle bore: 80 mm, control: SIEMENS SINUMERIK, weight approx.: 15,000 kg, Approx. Onsite Dimension. (l x w x h): 11,000 x 2,450 x 2,750 mm

Description Very well-preserved high-performance roller lathe WALDRICH SIEGEN. Refurbished in 2012 for € 595,000.00, with R&D control and functional guarantee. Details Type WKDF 900/15 Kop. Machine number 14183 Built in 1971 Bed width 1,610 mm Bed height 670 mm Bed length 7,670 mm Headstock center height 600 mm Face plate Ø 920 mm Clamping range 200 - 630 mm Support max. copying depth with largest turning diameter 250 mm Tailstock quill adjustment 100 mm Quilles Ø 300 mm max. workpiece length 4,000 mm max. workpiece weight 15 tons Additional Accessories Copying Device incl. documentation

faceplate diameter: 3500 mmswing diameter: 4100 mmturning height: 1400 mmControl: Siemens Slide movement horizontal longitudinal: 2100 slide adjustment: 1300 mmcross rail adjustment: 1300 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 1600 mmswing diameter: 1700 mmturning height: 1700 mmControl: Siemens type: 840 DSL Shop Turn: tool taper: 4 Pos.Rapid movement: 6000 mm/minturning speeds: 225 U/minx-travel: 2200 mmz-travel: 725 mmslide adjustment: 700 mmtransmission ratio: 2 total power requirement: 55 kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore for usnot binding. We reserve the right to prior sale, it applyonly our businessand conditions of sale.About Usmore than 400 own machines in stockover 12000 m² storage area, crane capacity 70 tmore than 10000 articles accessories for your workshopYou want to sell machines, production lines or your company,Then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dreh-Øüber Bett: 400 mmDreh-Øüber Support: 220 mmturning length: 1000 mmspindle turning speed range: 12,5 - 2000 U/minspindle taper: Bajonett 55022 spindle bore: 47 mmfeeds - longitudinal: 0,07 - 4,16 mm/Ufeeds - cross: 0.035 - 2,08 mm/Uthread - mm pitch: 0,87 - 192 mmthread - inch: 2 - 24 Gang/ inch.rapid travel - longitudinal/face: 3,4 / 1,7 m/minspindle drive: 11 kWpower capacity: 13 kWweight of the machine ca.: 2,8 tdimensions of the machine ca.: 2,8 x 1,2 x 1,5 m• 3-jaw chuck Ø 250 mm, 4-jaw chuck 200 mm,• 2-axis- digital display, ANILAM WIZARD LATHE - refinished in 1992,The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code 93024 Description Chucking lathe Make Warner & Swaswy Model 0 - AC Serial No. 2083651 Year 1972 Swing over bed 200 mm Swing over gap 200 mm Swing over crossslide 200 mm Spindle bore --- mm Longitude: 140 mm Cross: 100 mm Chuck : 160 mm Bore: 20 mm Number of spindle speeds 32 Spindle speeds 58 - 2507 rpm Feeds Longitude and cross Motor power 5,5 kW – 380 Volts Accessoiries hydraulic 3 chuck coolant Condition Machine is in good condition.

faceplate diameter: 1200 mmswing diameter: 1600 mmturning height: 1250 mmslide adjustment: 800 mmControl: Siemens type: 840 cpower capacity: 56 kW: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Largest workpiece height: 630 mm Largest workpiece diameter: 800 mm Largest workpiece weight: 2000 kg Engine power: 40 kW Dimensions: 2600x2500x3700 mm Machine Weight: 10000 Kg Electrical table voltage Electrical rotation of the knife head Shaped copy via template Two-axis measurement Ball screw Suitable for CNC conversion Accessories: Clamping pressure gauges Tools

Description: 1 used Precision lathe make: Leinen, model: LMB, year of construction: 1972 Center height 130 mm Center width 420 mm Spindle bore 25 mm Speeds 2800 rpm Accesories: Chip protection Four-jaw chuck Röhm 125 Quick release device Multifix size A documentationweight approx.: 440 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,350 mm

turning diameter over bed: 3000 mmturning diameter over slide rest: 2650 mmturning length: 19000 mmControl: Siemens type: 840 C mmfaceplate: 2500 mmturning speeds: 0,65-99,2 U/minRest: 2 steady: 2400 mmsteady: 900 mmsteady: 900 mmsteady: 500 mmmain drive motor: 180 kWworkpiece weight: 100 tchip conveyor: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 920 mmturning diameter over slide rest: 720 mmturning length: 4000 mmturning speeds: 1,4-280 U/mindigital readout: Acurite : steady: 640 steady: 500 faceplate: 900 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

An inspection is possible. ... más información

turning diameter over bed: 1440 mmturning diameter over slide rest: 960 mmturning length: 8200 mmfaceplate: 1250 mmbed width: mmturning diameter in the gap: 1460 mmlength of gap: 460 mmturning speeds: 1,8-400 U/minsteady: workpiece weight: 22000 kgtotal power requirement: 46 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.