tornos usadas para la venta

Typ/ type: TUD- 40 Hersteller/ make: WAFUM Year of make: 1975 Swing over bed/ slide: 400 /225 mm Drehlänge / turning length: 500 mm Working spindle hole in spindle: 56 mm Main spindle cone: Morse 6 Tailstock quill cone: Morse 5 Diameter of the tailstock quill/ diam. Sleeve: 90 mm Adjustment sleeve: 180 mm 21 working spindle speeds/ 21 speeds: 18..1800 rpm Longitudinal feeds / long. Feed: 0.08 .. 3.26 mm / rev Plan feeds /cross feeds: 0.04.. 1.63 mm / rev Thread pitches / threads: metr. Thread: 1..88 mm Inch thread: 1..88 gg./ 1" Module thread: 0.25..3.5 module Diametrical pitch thread: 112..8 pitch Rapid travel of support: 4.2 m / min Connected power: 7.35 kW Weight of the machine: approx. 2.8 t

Used Schutte Se 16 Multispindle automatic lathe model Se 16 six spindles, year 1975 maximum diameter with counter-pliers 18 mm, with the automatic loader it becomes 22 mm. electrical panel redone The machine is already set up for the loader, but it also has the tube and the stand ... más información

Conventional Vertical Lathe O-M TMS2-18/40 Made in 1975. Table size: 1800mm Max swing: 4000mm Max turning height: 1500mm Condition Under power.  ... más información

Maximum machining diameters: 4000 mm / 3500 mm (clamping plate) Clamping plate speed: max. 80 rpm Maximum workpiece height: 2000 mm Main drive power: 55 Kw Note grinding equipment Maximum workpiece weight: 40t Regular service and maintenance ... más información

turning diameter external: 4.300 turning length: 3.600 mmswing diameter over bed slide: 3.040 mmbar passage: 140 mmturning speed range: 0.18-92 U/mindigital readout: HEIDENHAIN total power requirement: 56 kWweight of the machine ca.: 55 tdimensions of the machine ca.: 9.450 x 4.700 x 4.400 mNew in 1976 / 2019- 8 independent jaw chuck Ø2.500 mm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1250 mmswing diameter: 1500 mmturning height: 1200 mmslide adjustment: 700 mmSide head: 620 mmturning speeds: 4-315 U/mintotal power requirement: 45 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Center height: 265mm, center distance: 1500mm, rotational speed: 9-1800/min, swing over bed/ crank: 550/ 750mm, connected load: 18.5kW, length: 4100mm, width: 1900mm, height: 1900mm, weight: 3.9t. ... más información

Description: Maximum distance between spindle and tailstock 1500 mmweight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 3,000 x 1,400 x 1,400 mm ... más información

Code 2841 Description Centerlathe Make Graziano Model SAG 12 Serial No. SAG 12 N 4475 Year 1976 Distance between centers 800 mm Swing over bed 320 mm Swing over gap 420 mm Swing over crossslide 176 mm Spindle bore 41 mm Number of spindle speeds 8 Spindle speeds 75-2000 rpm Feeds Longitude and cross Motor power 2 and 3 kW – 380 Volts Thread cutting Metric, W.W., Modul and D.P. Accessoiries 3 chuck Condition Machine is in normal condition.

Screw-cutter lathe Ryazan 165 Max. work piece diameter 1200 mm Max. work piece diameter above support 650 mm Distance between centers 5000 mm Diameter of spindle hole 85 mm Spindle speed, rpm 5…500 Spindle moto 22 kW Threading: – metric 1…120 – inch 28…1/4 – module 0,5…30 Number of threads: – metric 44 – inch 31 – module 37 Machine dimensions, mm 8050 x 2200 x 1876 Weight of the machine, kg app. 16800 Price - 12500 EUR

Manufacturer: Alfing Type: E II special machine Machine No.: 10-02541 Year of construction: 1976 Weight of the plant: approx. 43t General / technical data: Connecting rod stitch size: 400mm- 1.100mm Spindle thickness: depending on tools up to Ø350mm Installation area (l x w x h): approx. 6000 x 10000 x 3000mm Power Supply: 380V / 50Hz / 180kW Remark: ALFING special machine for fine spindling of connecting rod bearing seats for large engines. The machine has a clamping device that can be moved on the middle bed. The processing is done on 2 sides. Station 01 D with laterally movable carriage unit for adjusting the stitch size. The machine has a splash guard for wet machining. On the machine connecting rods of the Type 540 and Type 528 were produced (Deutz engines up to 300 liters displacement and 4000hp) Composed of: – 1 machine bed – 2 sled  ...

Retrofitted in 1998 and revised in 2012 by SIRMU Technical datas: Stroke: 2000 mm Inclination of the platform: 0-60 ° Rotation: 360° Table diameter: 4.500 mm Maximum table load: 50,000 kg Plate diameter: 2.250 mm Movement 4 stages 1 28 mm / min 2 100 mm / min 3 280 mm / min 4 560 mm / min tilting of the table: 0-60 ° 4 stages 2 0.7 ° / min 3 2 ° / min 4 4 ° / min 5 7 ° / min Rotation of the table 4 stages 1 270 mm / min referring to a diameter of 3,500 mm 2 890 mm / min 3 2,700 mm / min 4 5,400 mm / min Total weight: 90,000 kg

faceplate diameter: 1130 mmswing diameter: 1500 mmturning height: 1100 mmfaceplate diameter: mmswing diameter: mmtotal power requirement: 30 kWweight of the machine ca.: tdimensions of the machine ca.: mBrand: STANKOTYPEL 1512Build in: 1977with pneumatick 3-jaw stuck 1130 mmmax. turning diameter 1500 mmmax. turning height 1100 mmMotor 30 KWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1250 mmturning diameter over slide rest: 940 mmturning length: 600 mmcentre distance: 6200 mmspindle speed:: 1.6-315 U/mintailstock quill diameter: 200 mmworkpiece weight: 30 tworkpiece weight max.: 40 tsteady: 3 digital readout: total power requirement: kWweight of the machine ca.: 25 tdimensions of the machine ca.: 11x2,4x1,9 mdrive motor: 75 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

There are two identical lathes available, turning diameter: 600mm, year of construction machine 1/ 2: 1977/ 1987, machine 2 is defective and needs overhauling. ... más información

Inv. Num. : 7302 Type: SV 18 RA Producer: TOS Created: 1977, GO 2023 Parameters: Maximum turning length: 1250 mm Maximum turning diameter over bed: 380 mm Maximum turning diameter over support: 215 mm Maximum workpiece weight: 250 kg Equipment: Digital Measurement  ... más información

turning diameter: 700-1500 mmclamping length: 3000 mmguage width: 1676 mmControl: weight of the machine ca.: 60 tRafamet UBC 150 wheelset lathe for railway wheelsetsSerial No.: 152 110Year of manufacture: 1977Machining range: Diameter from 700 mm to 1500 mmGauge of the wheelsets to be machined in standard version: 1435mmtrack widths: 1435mm , 1524mm , 1676mmLength of wheelsets to be machined: 1640-3000mmRunning diameter of the wheelset: 700-1500mmDriving diameter: 350-1350mmWidth of the wheelset tyre: up to 140mmFork dimensions of the wheelset lathe_ 8700x360x3250mmTotal installed power: 172kWWeight of the machine: 59200kgSpeed of the setting movementLifting and centring device: 2500 mm/min.Headstocks: 1320 mm/min.Quills: 550mm/min.Supports in the longitudinal direction: 1300 mm/min.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 1120 mmturning length: 6000 mmswing diameter over bed slide: 760 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mBrand: ColomboType: VUP 2SYear of make: 1978Distance between centers: 6.000 mmCentre height: 560 mmSwing over bed: 1.120 mm øSwing over support: 760 mm ø4-Jaw chuck: 1.000 mm øDigital read-out: SonyIncluding:1 x steady rest 520 mm ø1 x steady rest 950 mm ø1 x open steady restChisel holderChisel support automatic feedRapid traverse chisel supportElectrically movable counter centerDrilling bar:length 2046 mm x 170 mm øThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 580 mmturning length: 1600 mmcontrol: Siemens 810 Tturning diameter over slide rest: 320 mmspindle passage: 85 mmTool changer: turning speeds: 12,5-4000 U/mintransmission ratio: 4 chip conveyor: 3 jaw chuck Forckrath: 315 mmsteady: 170 mmtail stock: total power requirement: 53 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 425 mmcentre height: 200 mmcentre distance: 1500 mmturning diameter over slide rest: 235 mmturning dia. in gap: 470 mmspindle bore: 45 mmcamlock: D6 lead of leadscrew: 6 mmtailstock quill taper MT: 4 diameter of quill: 55 mmquill stroke: 160 mmweight of the machine ca.: 1.5 tnumber of spindle speeds: 36-2240 Digital read-outMisc accessoriesMore details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.