tornos usadas para la venta

:LL 550 | LL 750 | LL950 turning diameter:550 | 750 | 950 mmturning length:3000/4000/5000/6000/7000/8000/9000/12000/14000 mmcontrol:Siemens/Fanuc/Fagor center height over bed:475|575|675 mmbed width:990 mmspindle bore:153/230/305/405 mmspindle nose:A2-11/A2-15/A2-20/A2-28 spindle speed:9-600/9-500/7-400/5-250 U/minspindle taper:6 MKspindle drive:22/26 (30/37 opt.) kWtool turret:4/8/12 hydraulisch oder elektrisch tool holder -shaft diameter:32 (40 opt.) mmtailstock quill diameter:165|200 mmtailstock quill adjustment:250 mmtaper in tailstock:6 MKtailstock movement:über Motor travel -x axis:370 | 480 mmtravel - z:= Spitzenweite mmservo motor X-axis:3 | 4 kwservo motor Z-axis:4 | 7 kwrapid power traverse in X-and Z direction:5/4 m/minhydraulic motor:2,2 (2,9 opt.) kWcoolant pump drive:3 (15 opt.) | 15 barweight of the machine ca.:12,7/15,3/18/21,5/24/26,6 | 13,7/16,4/19/22,2/25/27,6/30,2 ...

:LL-1250 | LL-1450 | LL-1650 turning diameter:1250 | 1450 | 1650 mmturning length:5000/6000/7000/8000/9000/12000/14000/16000 mmcontrol:Siemens/Fanuc/Fagor center height over bed:705|805|905 mmwidth of cross cariage:600 mmbed width:1370 mmspindle bore:200 mmspindle nose:A2-15/A2-15/A2-20/A2-28 spindle speed:4-400 U/minspindle taper:6 MKspindle drive:22/26 (30/37 opt.) kWtool turret:4/8/12 hydraulisch oder elektrisch tool holder -shaft diameter:40 mmtailstock quill diameter:300 mmtailstock quill adjustment:250 mmtaper in tailstock:7 MKtailstock movement:über Motor (Zahnstangenantrieb) travel -x axis:755 mmtravel - z:= Spitzenweite mmservo motor X-axis:4 kwservo motor Z-axis:7 kwrapid power traverse in X-and Z direction:5 m/minhydraulic motor:1,4 (ab 9m: 3,6) kWcoolant pump drive:15 barweight of the machine ca.:auf Anfrage machine length:15150/16150/17150/18150/19150/20150 mmmachine width ...

faceplate diameter:2000 mmswing diameter:2130 mmturning height:1400 mmram stroke range:1000 mmworkpiece weight:10 tfaceplate turning speed range:1 -200 U/minmain drive:60 kWtotal power requirement:95 kWweight of the machine ca.:24 tdimensions of the machine ca.:6,0 x 4,0 x 5,6 mwith CNC SIEMENS 840 DC-axis driven tooling 15/22 kWautomatic toolchnager 16-pocketsthrough spindle coolantsplash guarding and chip conveyor

faceplate diameter:1800 mmswing diameter:2000 mmturning height:1170 mmz-axis:1000 mmcross rail adjustment - vertical:800 mmfaceplate speeds::2,5 - 280 workpiece weight:12 tfeeds:1 - 6000 mm/minmax. torque on the faceplate:50000 Nmtotal power requirement:85 kWweight of the machine ca.:41 tdimensions of the machine ca.:5,6 x 4,8 x 4,6 mMachine retrofit and overhould in 2005 with SIEMENS 840 D powerline control- 6 jaw hydraulic power chuck- tool changer for 12 tools- chip conveyor, coolant attachment, splash housing- various tool holders

faceplate diameter:1000 mmswing diameter:1600 mmturning height:1200 mmmain drive:75 kWfaceplate speeds from - to:7 - 800 U/minmilling motor:25 kWmilling head speed:7 - 3000 U/minmilling spindle - taper:ISO 50cross rail adjustment - vertical:800 mmram head dimension:240 x 240 mmweight of the machine ca.:40 todimensions of the machine ca.:9 x 7,8 x 6,0 mMachine general overhould in 2004 and equiped with Siemens 840 D control- tool changer rack magazine- C-axis, live tooling, - Transmit function electronical Y-axis- angular milling head - complete splash housing - coolant device, chip conveyor

faceplate diameter:1400 mmswing diameter:2000 mmturning height:1500 mmmain drive:80 kWfaceplate speeds from - to:1 - 355 U/minmilling motor:37 kWmilling head speed:7 - 3000 U/minmilling spindle - taper:ISO 50cross rail adjustment - vertical:500 mmram head dimension:240 x 240 mmmax. ram stroke:1250 mmweight of the machine ca.:50 tototal power requirement:133 kVAdimensions of the machine ca.:11 x 5 x 6,4 mMachine general overhould in 2008 and equiped with CNC SIEMENS 840 D control- tool changer for 72 tools- C-axis, live tooling- Transmit function- complete splash housing - coolant device, chip conveyor- diverse accessories

:KDM-K 25 | KDM-K 28 | KDM-K 31 | KDM-K 35 faceplate diameter:2250|2830|3150|3500 mmswing diameter:2500|2800|3100|3500 mmturning height:1600/2000/2500 |2000/2500 |2000/2500 |2000/2500 mmmax. torque on the faceplate:63000 Nmmax. workpiece weight:10/16 ttable speeds:0,5-80 |0,5-80 |2-63 |2-50 1/minTravel of Ram (vertical):1000/1250|1000/1250|1000/1250|1000/1250/1600 mmTravel of ram (horiz.):1400|1600|1700|1800 mmrapid traverse X-axis:3 m/mincross section of ram:200x255 mmrapid feed cross beam:350 mm/minpower maindrive:55 kWWeight approx.:32/35/37|35/38/40|36/40/42|43/45 tface plate:siehe oben Rams:2 Stk.CNC controls from:Siemens/Fanuc turret:4-/6-fach, elektrisch

:KDM-K 40 | KDM-K 50 faceplate diameter:3150/3500|4000/4500 mmswing diameter:4000|5000 mmturning height:2500/3150/4000|2500/3150/4000 mmmax. torque on the faceplate:100000 Nmmax. workpiece weight:32/50/83 ttable speeds:2 ? 40 1/minTravel of Ram (vertical):1300/1600/2000 mmTravel of ram (horiz.):2250 | 2800 mmrapid traverse X-axis:3|4 m/mincross section of ram:200x255 mmrapid feed cross beam:350 mm/minpower maindrive:55|75 kWWeight approx.:58/75/115 |58/75/115 tface plate:siehe oben Rams:2 Stk.CNC controls from:Siemens/Fanuc turret:4-/6-fach, elektrisch

faceplate diameter:4700/5700 mmswing diameter:6300 mmturning height:3150/4000 mmworkpiece weight:63/100 ttable speeds:0.2-32 U/min (2 Stufen) max. torque:400 KNmslide stroke:vertikal: 1600/2000 mmslide stroke:horizontal: 3400 mmcross section of ram:240x240/280x280 mmCross rail travel :2000 mmrapid feed cross beam:300 mm/minfeed stepless:X-Achse: 1-500 mm/minmain drive:90/110 kWweight of the machine ca.:110/170 tMachine size (LxWxH):9000x7000x8000 mmcontrol:Siemens/Fanuc/Fagor worktool support (A-axis):2 Stück:1 StückRams:1 Stück konventioneller und 1 Stück CNC-Stößel CNC controls from:Siemens/Fanuc/Fagor for more information please check attached pdf file on the right hand side

faceplate diameter:6300 mmswing diameter:8000 mmturning height:4000 mmworkpiece weight:120 ttable speeds:0.2-16 U/min (2 Stufen) max. torque on the faceplate:200/460 k.Nmslide stroke:vertikal: 2500 mmslide stroke:horizontal: 4350 mmcross section of ram:280x280 mmMax. cutting force of tool head :links: 63 kN / rechts: 80 kN Cross rail travel :2000 mmrapid feed cross beam:300 mm/minfeed stepless:X-Achse: 1-500 mm/minmain drive:110 kWweight of the machine ca.:190 tMachine size (LxWxH):11000x9000x8000 mmcontrol:Siemens 828D/Siemens 840D worktool support (A-axis):2 Stück:1 StückRams:1 Stück konventioneller und 1 Stück CNC-Stößel CE-design:inkl. Zertifikat European electric:Schneider, Siemens, ABB oder ähnlich Servo motors:von Siemens SPS machine control:von Siemens CNC controls from:Siemens/Fanuc/Fagor for more information please check attached pdf file on the right hand side

turning diameter over bed:100 mmturning diameter over slide rest:70 mmturning length:300 mmtotal power requirement:0,8 kWweight of the machine ca.:0,5 tdimensions of the machine ca.:1,0 x 0,6 x 1,2 mPerfect condition table turning machine with belt drive and single tool holder ... más información

:FB-15 | FB-20 | FB-25 | FB-30 turning diameter:1500|2000|2500|2500 mmfaceplate diameter:1500|2000|2500|2500 mmturning length:330 mmmax. workpiece length:450 mmbed width:450 mmmax. workpiece weight -without tailstock:3000 kgwidth of cross cariage:250 mmspindle bore:155 (230 opt.) mmspindle nose:A2-11 (A2-15 opt.) spindle cone:7 MKspindle speed:4-600|4-600|4-400|4-400 1/minspindle speed steps:4 cross way of carriage:330 mmmovement longitudinal:1000|1000|1500|1500 mmspindle drive:22 (29 opt.) kWservo motor X-axis:ß12/3000i 1.8kw |ß12/3000i 1.8kw|1FL6067 2.0kw|1FL6067 2.0kw servo motor Z-axis:ß22/3000i 3kw |ß22/3000i 3kw |1FL6092 3.5kw|1FL6092 3.5kw ball screw:Ø25mm x P5 x C3 (X-Achse) ball screw:Ø40mm x P10 x C5 (Z-Achse) mmrapid power traverse in X-and Z direction:6/8 m/minnumber of tools:4 tool post size:32x32 mmweight of the machine ca.:7000|7500|8000|10000 kgMachine size (LxWxH): ...

turning diameter over bed:100 mmturning diameter over slide rest:70 mmturning length:80 mmtotal power requirement:1,0 kWweight of the machine ca.:0,5 tdimensions of the machine ca.:0,7 x 0,6 x 1,2 mfacing lathe with manual feed, various accessories ... más información

turning diameter:920 mmturning length:2034 mmx-axis:1025 mmy-axis:650 mmz-axis:2106 mmb-axis:240 °c-axis:360.000 x 0,001 °w-axis:2032 mmrapid traverse::40 m/minspindle turning speed range:1 - 1600 U/mintool taper:CAPTO C8work piece power:37 kWspeeds of tool:1 - 10000 U/minSpindle bore:170 mmtotal power requirement:125 kVAdimensions of the machine ca.:8,5 x 3,2 x 3,9 mweight of the machine ca.:26,5 tMachine with MAZAK Matric CNC control- 2 spindle boxes with C-axis and W-axis for right hand spindle- 2 power chucks 650 mm dia. Kitagawa- tool changer for 80 tools- Renishaw probe tester- hand operating panel- milling head with B- and Y axis- spindle changed in 10/21, last service in 12/23- coolant through spindle- splash housing, chip conveyor

turning diameter over bed:425 mmturning diameter over slide rest:215 mmturning length:1000 mmturning speed range:11,2 - 2240 U/minfeed range:0,02 - 1,6 mm/Uspindle bore:62 mmtotal power requirement:10 kWweight of the machine ca.:3 tdimensions of the machine ca.:2,8 x 1,2 x 1,3 mwith rapid feedcoolant attachment3-jaw chuckMULTIFIX toolholder system

faceplate diameter:1400 mmswing diameter:1600 mmturning height:1000 mmfaceplate turning speed range -stepless-:1 - 250 U/minmax. horizontal adjustment of cross-rail sup.:950 mmmax. adjustment of vertical turret slide:700 mmmax. vertical adjustment of side-support:1000 mmmax. horizontal adjustment of side-support:630 mmadjustment of cross-rail:660 mmadjustment speed of cross-rail:400 mm/minmax. workpiece weight:6300 kgfeed per revolution:0,025 - 10 mm/Upower capacity:56 kWweight of the machine ca.:21,5 tdimensions of the machine ca.:3 x 4,2 x 4,2 mwith 2-axes digital readout5-station turret headside headV-constant cutting speed

turning diameter:300 mmswing diameter:350 mmturning height:275 mmx-axis:925 mmz-axis:250 mmclamping chuck diameter:200 mmFeed speed:30 m/min.total power requirement:45 kWweight of the machine ca.:7 tMachine was used just from time to time in the last years - very good condition!with CNC SIEMENS 840 D12-station turret head with driven toolingsworkpiece in and out conveyor beltcoolantattachment and chip conveyordiverse accessories

turning diameter over bed:630 mmturning diameter over slide rest:360 mmturning length:2000 mmcentre distance:2500 mmspindle turning speed range:22,5 - 1120 U/minspindle motor:15 kWfeeds - cross:0,018 - 1,25 mm/Uweight of the machine ca.:6,0 ttotal power requirement:19 kWdimensions of the machine ca.:4,0 x 1,4 x 1,6 mMachine equiped with:- Heidenhain digital readout- 2 steady rests- rapid traverse- 3-jaw chuck, faceplate- splash cover- Multifix rapid tool changing system

Modell:SDM 630 | SDM 800 | SDM 1000 | SDM 1200 turning diameter over bed:630 | 800 | 1000 | 1200 mmturning diameter over slide rest:345|480|680|880 mmturning length:1000,2000,3000,4000,5000,6000,7000,8000~12000 mmtravel of cross-slide cross:370|420|520|620 mmmovement of the upper support:200 mmbed width:600 (Monoblock) mmspindle bore:105mm (130 oder 155 opt.) mmspindle nose:DIN 55029 Größe11 oder DIN 55027 Größe 11 spindle taper:Ø120mm/Konus 1:20 spindle speeds:7.5~1000|5,5~730|5,5~730|5,5~730 1/minmetric threading:1~240 mmfeeds - longitudinal:0.1~24,3 mm/minfeeds - cross:0.05~12,5 mm/minrapid traverse longitudinal and cross:4000, 2000 mm/minturning tool - shaft cross cut:32 x 32 mmtailstock quill diameter:100 mmtailstock quill stroke:240 mmtaper in tailstock:6 MKmain drive motor:11 (15 kw opt.) kWmax. workpiece weight between centers:3000 kgWeight approx.:4t bei Spitzenw. 1000mm ( ...

:YS-VL-1000 | YS-VL-1200 | YS-VL-1600 | YS-VL-2000 faceplate diameter:1000|1250|1600|2000 mmswing diameter:1350|1600|2000|2500 mmturning height:1070|1350|1350|1700 mmmax. turning diameter:1150|1350|1800|2300 mmtable load:4|5|8|10 ttable rotation speed:2 - 600 | 2 - 300 | 2 - 250 | 2 - 200 U/minmax. torque on the faceplate:10000|12500|18500|54000 NmTravel of Ram (vertical):800 | 900 | 900 | 1000 mmTravel of ram (horiz.):1350 | 1475 | 1650 | 2275 mmram head dimension:230 x 230|250 x 250|250 x 250|280 x 280 mmrapid power traverse in X-and Z direction:10/12|10/12|10/12|10/10 m/minfeeds:0,1 - 50 mm/Ufeed speeds:0 - 1260 mm/minTool changer:12 (C-Achse mit 16) drive capacity - spindle motor:37/45| 37/45 (60/75 opt.)| 37/45 (60/75 opt.)| 37/45 (60/75 opt.) kWMachine height: 5330 |5500 |5500|6600 mmmachine length:4600 |4700 |5050| 4950 mmmachine width:5500 |5800 |6300|7320 mmweight of the mac ...