tornos usadas para la venta

:SDM-1480Z | SDM-1680Z | SDM-1980Z | SDM-2080Z turning diameter over bed:1480|1680|1980|2080 mmturning diameter over slide rest:1000|1200|1500|1600 mmturning length:2000/3000/4000/5000/6000/8000/10000/12000 mmbed width:1100 mmworkpiece weight:12 (15 opt.) tspindle bore:130 mmspindle taper:140 spindle speed (3 steps):2,5-250 U/minmetrical thread cutting:1~120 (44 Arten) mmlongitudinal feeds:0.1 ~ 12 (56 Arten) mm/Uface feeds:0.05 ~ 6 (56 Arten) mm/Urapid traverse longitudinal:3400 mm/minrapid traverse cross:1700 mm/mincross way of carriage:760 mmmovement of the upper support:300 mmtool size:45 x 45 mmtailstock quill diameter:260 mmstroke:300 mmtailstock-quill conus:80 metrischspindle motor:30 (50 opt.) kWtool holder:4-fach steady diameter:500-800 mmCNC controls from:Siemens/Fanuc/Fagor payment: 100 % before loadingwarranty:12 months on parts onlyBRANDNEW conventional heavy duty center lat ...

Rated current: 65 A, Wiring diagram: 49c4269 ... más información

with threading gear ... más información

:SDM 1000E | SDM 1250E | SDM 1400E turning diameter over bed:1000|1250|1400 mmturning diameter over slide rest:650|900|1100 mmturning length:2000/3000/4000/5000/6000/8000/10000/12000 mmmax. workpiece weight between centers:8000 kgbed width:755 mmspindle nose:A2-15 spindle bore:130 mmspindle speed (3 steps):3,15-315 U/minmetrical thread cutting:1~120 (56 Arten) mmcross way of carriage:520|680|720 mmmovement of the upper support:300|300|400 mmtool size:45 x 45 mmtailstock quill diameter:180 mmstroke:300 mmtailstock-quill conus:6 MKweight of the machine ca.:bei 3m: 12 t (jeder weitere Meter ca. 800kg) Machine size (LxWxH):bei 3m: 6100x1900x2000 mmtool holder:4-fach follower rest:50-220 mm4 jaw chuck:1000 mmsteady diameter:50-470 mmCNC controls from:Siemens/Fanuc/Fagor payment: 100 % before loadingwarranty:12 months on parts onlyBRANDNEW conventional heavy duty center lathe

turning diameter:33 mmturning length:330 mmcontrol: 840 total power requirement:20 kWweight of the machine ca.:6 tdimensions of the machine ca.:3850,2000,2100 m17 axes3 revolvers with the powered tools 1 gantry with the driven tools Main and counter spindle with C axesBarfeederMachine On-time 58,133 hours

Digital readout: Mitutoyo ... más información

turning diameter:670 mmturning length:3000 mmcontrol:840 z-axis:3150/3000 mmy-axis:-125/+175 mmx-axis:700/260 X+ mmc-axis:0,001 °main gear-box motor:60/40 kWspindle turning speed range:2600/3300 U/minspindle diameter in front bearing:160 mmSpindle bore:115 mmlower slide:2 x 12, VDI 40 mmupper slide:25 kWno. of tools in the magazine:90 Stückworkpiece length:900 mmtool taper:HSK 100 / VDI 40 rapid traverse::15/20 m/mintotal power requirement:140 kWweight of the machine ca.:35 tdimensions of the machine ca.:13 x 4,5 x 3,6 mCNC TURNMILL center with opposed spindles and 2 saddles, used for Alu operation only- SIEMENS 840 C control for 8 axis- Left/Right spindle with C-axis, KNCS 400 mm power chuck- Lower saddle with 2 x 12-fold revoving heads- Turning.- boring,- milling unit on top saddle, HSK 100 tool taper, 25 kW drive motor, 10-4000 r/min, B and Y axis- Coolant device with 80 bar and ro ...

Description: clamping plate diameter: 8000 mm clamping plate diameter with extensions: 12500 mm max. workpiece weight: 200 tons clamping plate speed: 0.35 - 14 rpm smallest turning diameter: 5000 mm cross member without bases: 1040 mm transom with 3 pairs of bases: 5090 mm largest ,distance between the clamping plate and blase side bracket holder: 4200 mm vertical movement of the cross support: right: 3500 mm left: 2550 mm horizontal movement side carrier: 2000 mm vertical movement side carrier: 4000 mm area required: 20000 x 20000 x 12000 mm max. workpiece weight between centers: 200,000 kg, weight approx.: 550,000 kg, Approx. Onsite Dimension. (l x w x h): 20,000 x 12,500 x 11,750 mm

:KDM-K 12| KDM-K 16 | KDM-K 20 | KDM-K 23 | KDM-K 26 faceplate diameter:1000|1400|1800|2000|2300 mmswing diameter:1200|1600|2000|2300|2600 mmturning height:1000|1250|1400|1600|1500 mmtable speeds:6,3- 200|5-160 | 3.2-100 | 5-160 | 2,5- 80 m/mintransmission ratio:16 max. workpiece weight:3,2|5|8|8|8 trapid feed of tool post:1800 mm/minfeed speeds:0,8-86 mm/min in X-AchseTravel of Ram (vertical):650/700|800/1000|800/1000|800/1000/1300|1000/1380 mmTravel of ram (horiz.):630|915|1115|1250|1500 mmmax. vertical adjustment of side-support:900|900|980|980 mmmax. horizontal adjustment of side-support:630|630|500|500 mmCross rail travel :850/1100|890/990/1240/1640|1240/1640 mmpower maindrive:22|30|37|37 kWweight of the machine ca.:9|14|18|23|21 tMachine size (LxWxH):2299x2540x3403|2660x26603698|3135x3070x3910|3380x3360x4300|390 0x2950x4400 mmtool holder:5 fach:LED 4 jaw chuck:mit 4 Klauenkläst ...

turning diameter over bed:350 mmturning diameter over slide rest:240 mmturning length:800 mmSpindle RPM:40 - 2000 in 8 Stufen 1/mintotal power requirement:3 kWSpindle bore:26 mmtailstock quill taper MT:MK 2 dimensions of the machine ca.:1,5 x 1,0 x 1,6 mweight of the machine ca.:1,9 tVery well maintened center lathe with accessories- 3-jaw, 4-jaw chuck- tailstock with center- 1 boring head- RAPID quick tool change device with 3 holder- saddle mounted steady rest- collant device- set of collets appr. 75% size B 32

Description: Dörries single-column vertical lathe with 2.4 m swing diameter for turning, drilling and milling operations. Components can be completely machined in a single clamping operation. Control system and Machine number Control: SIEMENS Sinumerik 840 D Machine number: ,V-800292 Geometric main dimensions Machine table diameter: 2200 mm Maximum table load: 17 tonnes Rotation diameter: 2400 mm Working height: 2145 mm , Cross-section of ram slide: 250 x 250 mm (minimum dipping diameter: 380 mm) Travelling distance of ram slide: 1500 mm Crossbeam travel: 1000 mm (100 mm steps) Cross beam support Travelling distance: ± 1350 mm Tool change path: 720 mm Machine drive Drive power main drive: 100 kW Speed range in 2 gear stages: 1.3 - 250 rpm Feed drives , Horizontal and vertical cross beam support: 0 - 18000 mm/min Cross beam adjustment speed: 400 mm/min Milling drive ...

Equipped with 2-axis digital readout. -1.5 kW. - Recording claws: D1-5 / CAMLOCK. -Number of speeds: 8. -Speed range: 70 - 2000 rpm -Main shaft recording: MK4. -Tailstock recording: MK3. -Tailstock diameter: 32 mm. -Incl 3 and 4 claw, adjustment plate, fixed goggles, -Guided glasses, lighting, cooling, change wheels.

Description: Dörries single-column vertical lathe with 2.4 m swing diameter and hydraulic clamping table. Control and machine number SIEMENS Sinumerik 840 D control system Machine number: V-800289 Geometric main dimensions Machine table diameter: 2000 mm Maximum table load: 17 tonnes Rotation diameter: 2400 mm Working height: 2445 mm , Cross-section of ram slide: 250 x 250 mm (minimum dipping diameter: 380 mm) Travelling distance of ram slide: 1500 mm Cross beam support Travelling distance: ± 1350 mm Crossbeam travel: 1000 mm (100 mm steps) Crossbeam travel (100 mm steps): 1000 mm Tool change path: 720 mm Machine drive Drive power main drive: 100 kW Speed range in 2 gear stages: 1.3 - 250 rpm Feed drives , Horizontal and vertical cross beam support: 0 - 18000 mm/min Cross beam adjustment speed: 400 mm/min Milling drive Milling drive power: 37 kW Speed range in 2 gear  ...

Description: Dörries Single-column Vertical Lathe with 2.4 m swing diameter for turning, drilling and milling operations. Components can be completely machined in a single clamping operation. Control system and Serial number Control: SIEMENS Sinumerik 840 D Serial number: ,V-800288 Geometric main dimensions Machine table diameter: 2200 mm Maximum table load: 17 tonnes Rotation diameter: 2400 mm Working height: 2145 mm , Cross-section of ram slide: 250 x 250 mm (minimum dipping diameter: 380 mm) Travelling distance of ram slide: 1500 mm Crossbeam travel: 1000 mm (100 mm steps) Cross beam support Travelling distance: ± 1350 mm Tool change path: 720 mm Machine drive Drive power main drive: 100 kW Speed range in 2 gear stages: 1.3 - 250 rpm Feed drives , Horizontal and vertical cross beam support: 0 - 18000 mm/min Cross beam adjustment speed: 400 mm/min Milling drive  ...

Attention! This machine has already been dismantled and is in storage. ... más información

Description: Dörries single-column vertical lathe with 2.4 m swing diameter for turning, drilling and milling operations. Components can be completely machined in a single clamping operation. Control system and Machine number Control system: SIEMENS Sinumerik 840 D Machine number: V-800291 Geometric main dimensions Machine table diameter: 2200 mm Maximum table load: 17 tonnes Rotation diameter: 2400 mm Working height: 2145 mm , Cross-section of ram slide: 250 x 250 mm (minimum dipping diameter: 380 mm) Travelling distance of ram slide: 1500 mm Crossbeam travel: 1000 mm (100 mm steps) Cross beam support Travelling distance: ± 1350 mm Tool change path: 720 mm Machine drive Drive power main drive: 100 kW Speed range in 2 gear stages: 1.3 - 250 rpm Feed drives , Horizontal and vertical cross beam support: 0 - 18000 mm/min Cross beam adjustment speed: 400 mm/min Milling dri ...

Description: Dörries VCE 2800 SM F Single-column Vertical Lathe with 2.8 m swing diameter. Control system SIEMENS Sinumerik 840 D Geometric main dimensions Swing diameter: 2800 Basic turning height with fixed crossbeam: 1335 Turning height including adjustment of the grid steps: 1935 mm Cross-section of chisel slide: 250 x 250 mm , Travelling distance of chisel slide: 1100 mm Fixed Crossbar Machine table Machine table diameter: 2500 mm Maximum table load: 25 tonnes Drive power main drive: 80kW Torque on machine table: 35900 Nm Speed range in 2 gear stages: up to 224 rpm Feed drives and Cutting forces Horizontal and vertical crossbeam support: 0 - 18000 mm/min Cutting force when turning: 19000 N Tool system Vertical 4-fold Capto C6 turret Please have a look at the technical data and the layout plans in the PDF file.turning height: 1,935 mm, swing diameter: 2,800 mm, control ...

Description: Dörries single-column vertical lathe with 2.4 m swing diameter. Control and machine number SIEMENS Sinumerik 840 D control system Machine number: V-800290 Geometric main dimensions Machine table diameter: 2000 mm Maximum table load: 17 tonnes Rotation diameter: 2400 mm Working height: 2445 mm , Cross-section of ram slide: 250 x 250 mm (minimum dipping diameter: 380 mm) Travelling distance of ram slide: 1500 mm Crossbeam travel: 1000 mm (100 mm steps) Cross beam support Travelling distance: ± 1350 mm Crossbeam travel (100 mm steps): 1000 mm Tool change path: 720 mm Machine drive Drive power main drive: 100 kW Speed range in 2 gear stages: 1.3 - 250 rpm Feed drives , Horizontal and vertical cross beam support: 0 - 18000 mm/min Cross beam adjustment speed: 400 mm/min Milling drive Milling drive power: 37 kW Speed range in 2 gear stages: 8 - 3000 rpm Tool sy ...

Equipped with three-claw.. ... más información

Description: Specification : Bed Length 26' Capacity Machine Swing : 29.5' / 760 mm Maximum Machining Diameter : 16.540' / 420 mm Maximum Working Capacity : 4' / 102 mm Maximum Machining Length : 23.8' / 603 mm Main Spindle Chuck Size : Kitagawa 15' Maximum Speed : 4000 rpm Motor Output (30 min rating) : 40 Hp / 30 kW Second Spindle Chuck Size : Kitagawa 10' Maximum Speed : 4000 rpm Motor Output (30 min rating) : 35 Hp / 26 kW Turret (Upper) Number Of Tools : 12 Maximum Speed : 6000 rpm Motor Output (30 min rating) : 10 Hp / 8 kW Feed Axes Travel (X Axis) : 11' / 280 mm Travel (Y Axis) : 6' / 150 mm Travel ((Z Axis) : 26.39' / 670 mm Travel (W Axis) : 26.63' / 650 mm Complete with Turbo Vacummentation SWL 69 kgs Swing Jib Crane, Demag electric lift hoist.turning diameter: 420 mm, Drehlänge: 603 mm, serial number: 325,905, turning diameter over slide: 29.5' / 760 mm mm, x-motio ...