subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 102)
X-travel: 700mm, y-travel: 250mm, z-travel: 1125mm, B-travel: 1100mm, number of axis: 6, controls: NT Smart X, connected load: 90kVA, length: 4460mm, width: 2670mm, height: 2615mm, weight: 17t, operational hours counter: 18,177h, an inspection is possible. ... más información
Spindle opening: 2x 65mm, turning diameter: 230mm, turning length: 673mm, turning chuck diameter: 210mm, max. rotational speed: 5000/min, spindle power: 11kW, controls: FANUC Series 31i-MODEL B, connected load: 60kVA, weight: 8.5t, operational hours counter: 9860h, with documentation, accessories, various tools, clamping devices and bar loader, without robot, was maintained regularly, an inspection is possible.
Center height: 450mm, maximum turning diameter: 700mm, maximum turning length: 4000mm, chuck range for the four-jaw chuck: 100 - 700mm, additional clamping cartridge span range: 500mm, spindle speed ranges: 8, adjustable from 1 to 75 rpm, feed rates: continuously adjustable from 1 to 200mm per minute. The feed drives were upgraded in 2009 to Siemens 1FK7, including all necessary electrical work, which allowed for the elimination of the PIV feed gearbox. An on-site inspection is possible.
A single-spindle pick-up lathe is available, max. swivel diameter: 250mm, working spindle nose: ASA 6 inch, spindle in front bearing: 110mm, max. chuck diameter: 250mm, weight: 13t, operating hours: approx. 82,400h, with documentation, an on-site inspection is possible. ... más información
A single-spindle pick-up lathe is available, max. swivel diameter: 130mm, spindle in front bearing: 90mm, max. chuck diameter: 160mm, weight: 10t, operating hours: approx. 88,000h, with documentation, an on-site inspection is possible. ... más información
Turning length: 250mm, center height: 240mm, swing/ over slide: 280/ 185mm, operational hours counter: 55,325h, with documentation, without tools, was maintained regularly, an inspection is possible. ... más información
Center height: 160mm, center distance: 900mm, with various accessories, an inspection is possible. ... más información
Connected load: 58.5kVA, operational hours counter: 50,559h, with documentation, without tools, was maintained regularly, an inspection is possible. ... más información
Center height: 360mm, bed width: 430mm, turning length: 1500mm, with documentation. ... más información
X-travel: 425mm, swing/ over bed/ slide: 970/ 710/ 370mm, spindle rotational speed: 125-1480/min, max. load: 3t, width: 2630mm, height: 2170mm, with tools, was maintained regularly, an inspection is possible. ... más información
Max. turning diameter: 340mm, turning length: 300mm, control: OSP 700 L, length: 4500mm, width: 2500mm, height: 2800mm, on-site inspection is possible. ... más información
Max. workpiece diameter: 25mm, max. workpiece length: 100mm, max. bar diameter: 25mm, max. stroke X/Z: 42mm/50mm, rapid traverse: 40m/min, number of spindles: 6, speed: 12000rpm, control: Siemens 840D Powerline. ... más información
Center width: 1500mm, max. chuck diameter: 200/240mm, motor power: 4kW, including steady rest, on-site inspection is possible. ... más información
Turning diameter cross slide/bed: 170mm/400mm, turning length: 550mm, spindle bore: 42mm, bar length: 3200mm. Tool turret: 12-position turret, control: TX8F, loading magazine: LNS Hydrobar, spindle hours: 30707. Including chip conveyor, tailstock (not in use). Available from May, 2024. ... más información
Max. turning diameter: 200mm, max. turning length: 400mm, spindle speed: 6000rpm, bar capacity: 42mm, weight: approx. 4300kg. ... más información
Max. speed range: 5000 rpm, bar capacity: 65 mm, max. turning diameter: 200 mm, max. turning length: 400 mm. Number of spindles: 2, tool changer: 2x 14, Siemens control. Including outfeed conveyor, KNOLL 400S-1 chip conveyor (year of manufacture: 2016), switch cabinet with cooling unit, CO2 extinguishing system and INDEX bar loader. General overhaul in 2016.
Converted to CNC in 2002, control: Siemens 840D, footprint X/Y: approx. 6000mm/8000mm, max. speed: 2000rpm, interference circle turning diameter: 1800mm. Including: Tool changer with 12 tools. Documentation available. ... más información
Traverse paths facing slide/top slide/tailstock quill: 345mm/125mm/190mm, longitudinal/face feed per revolution: 56mm/28mm, speed: 2240rpm, max. workpiece weight: without setting block: 500kg, 1 setting block: 630kg, 2 setting blocks: 800kg. Circumferential diameter over bed/plane slide/bed spreading: 570mm/365mm/600mm. The automatic plan feed is defective. Documentation available.
Center width: 1500mm, max. turning diameter: over bed: 500mm, over cross slide: 290mm, max. spindle speed: 2800rpm, control: Monforts Control-System K, weight: 3300kg. Including Coromant Capto with inserts, workbench without tools, grating. ... más información
Center height over bed/slide: 433mm/267mm, turning diameter over bed/slide: 425mm/267mm, max. turning diameter in the recess: 711mm. Center distance: approx. 2000mm, spindle bore: 76mm, speed: 1600rpm, length of recess: 312mm. On-site inspection is possible. ... más información