tornos usadas para la venta

turning diameter:50 mmturning length:40mm bei Automatisierung; sonst 100 mmcontrol:Fanuc Oi-TF (8,4 '' LCD-Monitor) greates pass round over bed:230 mmBar capacity:26 mmspindle speeds:6000 1/minspindle nose:A2-4 spindle drive:3.7/5.5 KW (Fanuc ?3/10000i) spindle bearing diameter:70 mmrapid power traverse in X-and Z direction:30 m/mintravel -x axis:220 mmtravel - z:220 mmautomatic feeds:0,001-5000 mm/minMachine size (LxWxH):1370x1630x1750 mmhydraulic motor:0,75 kWhydraulic pump:30 L/minhydraulic tank:30 lservo motor X-axis:0,75 kwservo motor Z-axis:0,75 kwweight of the machine ca.:1,5 tmachine dimensions:1490x1870x1610 xxcoolant system:100 Ltool holder:innen, außen, Bohrhülse etc. collet chuck:mit Adapter (hydraulisch) GANG TOOLING SYSTEM:(Linearschlitten; kein Revolver) facing tool holder:3 Stk.OD tool holder:2 Stk.I.D. TOOL HOLDER :(Ø 20 MM) X 4 Stk. BORING SLEEVES :10 Stk. (Ø 6, 8, ...

turning diameter:700/410 mmturning length:800 mmspeeds spindle 1:5000 1/minspeeds spindle 2:6000 1/minMain spindle capacity:32/25 kWhollow clamping cylinder:77 mmy-Axis min./max.:+/- 100 mmtool magazin::48 Postool taper:HSK 63 milling head speed:12.000 1/minmilling spindle drive:22,5 / 19 kWtotal power requirement:74 kVAdimensions of the machine ca.:6,50 x 2,68 x 2,00 msub spindle power:14,5 / 12,5 kWCNC - Turnmill with B-axis (torque-motor) and subspindle,5-axis simultaneously machining,alternating speed,MPC 1.0,3-D touchprobe BLUM TC62, Main spindle ISM 76, C axis and brake Subspindle ISM 52, C axis and brake Partly hollow clamping device for subspindle ( D = 52 ),Differential pressure device for main- and subspindle coolant device 8/20bar, 20/25 l/min, paperfilter,coolant through subspindle,Chip conveyer,Chuck flushing device (main- and subspindle), oilmist suction,flush gun,pneumati ...

weight approx.: 1,600 kg, Approx. Onsite Dimension. (l x w x h): 1,700 x 1,200 x 1,700 mm ... más información

turning diameter:300 mmturning length:320 mmcontrol:Fanuc 0i TD MG max. swing diameter:520 mmspindle speeds:4800 1/min.spindle passage:44 mmspindle drive:7,5/9 kWbrand new CNC slant bed lathe with 1. Control system Fanuc Oi-TD (8,4" LCD monitor)2. X/Z-axis stroke 170/600 mm3. X/Z-axis rapid traverse 30/30 M/MIN4. Spindle motor 11 / 15 Kw5. Spindle speed 4500 rpm (Belt driven type)6. Spindle bearing dia. Ø 100 mm7. Bar capacity Ø dia 51 mm)8. Hydraulic Hollow chuck 8" x 3 jaws9. Hyd. unit for chuck with air cooler10. Servo driven turret system 12 stations11. Manual tailstock stroke 500 mm + quill stroke 100 mm12. Electrical cabinet with heat exchanger13. Standard splash guide14. Coolant unit15. Transformer (power source 380V)16. Chip conveyor H=1100 MM with trolley (chain type)17. Machine color Tongtai white/Dark grey18. Safety foot switch19. Tricolor lamp20. Fanuc warranty (western Eur ...

swing diameter:320 mmcontrol:840 D SIEMENSturning speeds:5000 1/minspindle drive:20 / 27 kWchucking diameter:250 mmtravel -x axis:650 mmtravel -z axis:300 mmturret head:12 Pos.tool holder:VDI 40 toolpiece turning speed range:4000 1/minwork piece power:max. 11,7 kWweight of the machine ca.:8 tCNC vertical lathe,live tools,C-axis,high pressure pump 20 bar, 500l, filter,flush gun,3-jaw chuc,EWAB loading station right,chipconveyor,approx. 23.500h "machine on", approx. 8.000h "spindle on"

Description: Fagor digital display Turning diameter over bed: 500 mm Turning diameter over support: 300 mm Spindle bore: 72 mm Turning diameter in the offset: 700 mm Spindle speeds - infinitely variable: 20 - 2000 rpm Metric threads: 0.5 - 120 Thread - module: 0.125 - 30 mm Thread - inch: inch. Whitworth thread: 0.25 - 60 TPI Bed width: 400 mm Spindle cone: Size 8 Number of feeds: 120 mm/rev Longitudinal feeds:: 0.04 - 12 mm/rev Cross feeds: 0.02 - 6 mm Thread: 64 steps Slide path: 315 mm Top slide adjustment: 130 kW Quill diameter: 75 mm Quill taper: MTS Quill stroke: 230 mm Total power requirement: 11 kW Drehlänge: 1,000 mm, weight approx.: 2,650 kg, Approx. Onsite Dimension. (l x w x h): 2,500 x 1,300 x 1,500 mm

turning diameter:300 mmturning length:600 mmcontrol:Fanuc 0i TD swing diameter over bed slide:320 mmswing over bed:520 mmbar material dia.:64 mmspindle speeds:4500 1/min.spindle drive:11/15 kWturret:12-fach Tool setter:manuell brand new CNC turning center with Contains:1 CONTROL SYSTEM FANUC 0i-T (10.4" DISPLAY)2 X/Z AXIS STROKE 170/600 MM3 X/Z AXIS RAPID TRAVERSE 30/30 M/MIN4 SPINDLE MOTOR 11/15 KW5 SPINDLE SPEED 3,500 RPM (BELT-DRIVEN TYPE)6 SPINDLE BEARING DIA. F 120 MM7 BAR CAPACITY DIA. F 64 MM8 HYD. HOLLOW CHUCK 10" X 3 JAWS9 HYD. UNIT FOR CHUCK WITH AIR COOLER10 SERVO-DRIVEN TURRET SYSTEM 12 STATIONS11 MANUAL TAILSTOCK STROKE 500 MM + QUILL STROKE 100 MM12 ELECTRICAL CABINET WITH HEAT EXCHANGER13 STANDARD SPLASH GUARD14 COOLANT UNIT15 TRANSFORMER (POWER SOURCE 380V)16 CHIP CONVEYOR H=1100 MM WITH TROLLEY (CHAIN TYPE)17 MACHINE COLOR TONGTAI WHITE/DRAK GREY18 TRICOLOR LAMP19 FANUC  ...

turning diameter:620 mmturning length:2.000 mmturret (x-stations):8 tool taper:VDI 40 turning diameter over bed slide:415 mmcontrol:8055 TC FAGOR spindle bore:80 mmrapid power traverse in X-and Z direction:10 m/minspeeds:0-650 / 650-2.500 1/mintotal power requirement:28 kVAweight of the machine ca.:3,6 tdimensions of the machine ca.:4,6 x 2 x 1,8 mteach-in lathe with tailstock MT 5, 8-hole turret,3 jaw-chuck

Description: Distance between points: 1m500 With display Collection on: 29/04/2024  ,  ,Collection times by arrangement  , IMPORTANT: Collection times may vary if separate collection times are explicitly stated in , in the item descriptionweight approx.: 2,700 kg, Approx. Onsite Dimension. (l x w x h): 2,640 x 1,270 x 1,360 mm

turning diameter:520 mmturning length:600 mmcontrol:Fanuc 0i TF swing diameter over bed slide:320 mmmax. turning diameter:280 mmBar capacity:51 mmspindle speeds:4500 1/min.x-travel:200 mmz-travel:600 mmrapid power traverse in X-and Z direction:30 m/mintailstock quill stroke:100 mmtailstock adjustment:500 mmspindle drive:11/15 kWMachine size (LxWxH):3,440x1,820x2,380 mmmachine weight:4100 kglive center:4 MKturret:12-fach, VDI 40 Boring bar holder:BMT 65 hollow chuck:hydr. 250 mmbrand new CNC turning center with Contains:1. Control system Fanuc Oi-TD (8,4" LCD monitor)2. X/Z-axis stroke 200/600 mm3. X/Z-axis rapid traverse 30/30 M/MIN4. Spindle motor 11 / 15 Kw5. Spindle speed 3500 rpm (Belt driven type)6. Spindle bearing dia. Ø 120 mm7. Bar capacity Ø dia 64 mm8. CS axis function 0.001 degree spindle positioning9. Hydraulic Hollow chuck 10" x 3 jaws10. Hyd. unit for chuck with air cool ...

bar material dia.:38 mmturning length:350 mmturning speeds:7.000 / 7.000 U/minnumber of tools:30 (3 x 10) driven tools:ja / yes control:FANUC 31i-B5 rapid traverse:30 m/mintotal power requirement:10,5 kVAweight of the machine ca.:6,5 tdimensions of the machine ca.:2,50 x 1,45 x 1,75 plus Lademagazin mwork piece power:4 kWtoolpiece turning speed range:5.700 1/minmain spindle power:11 kWsub spindle power:7,5 kWCNC sliding headstock machine STAR ST 38,3 turrets,12 CNC Axis (X1/Z1/Y1/C1/X2/Z2/Y2/YA2/C2/X3/Z3/Y3,Fireextinguisher KRAFT und BAUER FB 703,partscatcher and conveyor belt (for long parts),LTA oilmist suction,chiller for oil,machining with oil as coolant,reading hours:approx. 14.500 hours "machine on", approx. 4.100 hours "machining"

Description: Distance entre les points 2m Collection on: 29/04/2024  ,  ,Collection times by arrangement  , IMPORTANT: Collection times may vary if separate collection times are explicitly stated in , in the item descriptionweight approx.: 2,100 kg, Approx. Onsite Dimension. (l x w x h): 3,405 x 1,175 x 1,295 mm

turning diameter:520 mmturning length:500 mmcontrol:Fanuc Oi-TF max. swing diameter:520 mmspindle speeds:4500 1/min.spindle drive:11 / 15 kWbrand new CNC slant bed lathe with Contains:1. Control system Fanuc Oi-TF (8,4" LCD monitor)2. X/Z-axis stroke 170/400 mm3. X/Z-axis rapid traverse 30/30 M/MIN4. Spindle motor 11 / 15 KW5. Spindle speed 4500 rpm (Belt driven type)6. Spindle bearing dia. 100 mm7. Bar capacity dia 51 mm)8. Hydraulic Hollow chuck 8" x 3 jaws9. Hyd. unit for chuck with air cooler10. Servo driven turret system 12 stations11. Manual tailstock stroke 275 mm + quill stroke 100 mm12. Electrical cabinet with heat exchanger13. Standard splash guard14. Coolant unit15. Transformer (power source 380V)16. Chip conveyor H=1100 MM with trolley (chain type)17. Machine color Tongtai white/Dark grey18. Safety foot switch19. Tricolor lamp20. Fanuc warranty (western Europe)Standard acces ...

turning diameter:340 mmturning length:480 mmweight of the machine ca.:5,2 ttransport dimensions LxWxH:2200 x 1720 x 2200 mdist. between centers:500 mmspindle diameter:100 mmspindle bore:62 mmno. of tools in turret 1:12 c-axis:360 grad 4-axis Okuma LB 300 built in 2004 with a large turret type V12 for 12 x L or M tools and a hydraulic tailstock.

X-travel: 680mm, z-travel: 200mm, max. chuck diameter: 250mm, max. swing: 260mm, connected load: 55kW, weight: 8t. ... más información

Description: Distance between points: 700mm Collection on: 06/05/2024  ,  ,Collection times by arrangement  , IMPORTANT: Collection times may vary if separate collection times are explicitly stated in  ,in the item descriptionweight approx.: 1,400 kg, Approx. Onsite Dimension. (l x w x h): 2,200 x 1,000 x 1,700 mm

This machine comes from a training workshop.Technically, the machine is fully functional and in a well-maintained condition.  ... más información

There are two identical Emag VSC 200 available, x-travel: 685mm, z-travel: 160mm, chuck diameter: 200mm, circumferential diameter: 290mm, connected load: 29kW, controls: SIEMENS SINUMERIK, length: 2700mm, width: 1150mm, height: 2800mm, weight: 6.5t, with documentation. ... más información

max. turning diameter:102 mmturning length:450 mmswing dia.:494 mmbar material dia.:65 mmspindle turning speed - stepless:S1 / S2: 4.000 1/minspindle drive:S1 / S2: 18,6 / 11 kWTurret No.1 stations / rotary tools:10/10 VDI 30 Turret No.2 stations / rotary tools:10/10 VDI 30 Driven Tools:8.000 1/minwork piece power:3,7 kWtotal power requirement:90 kVAweight of the machine ca.:10 tdimensions of the machine ca.:6 x 2,5 x 2, mCNC-turning-center with 2 turrets,8 axis,2x 10-pockets turrets with live-tools, C-axis on both spindles,Y-axis +-35mm turret 1,2pcs. collet-chucks,chipconveyor,barfeeder,tooleye,approx. 60.000h "machine on", approx. 17.500h "spindle on"

X-travel: +/-2750mm, z-travel: 2000mm, B-travel: +/-90°, C-travel: 360°, table diameter: 4500mm, turning and circumferential diameter: 5000mm, max. turning height: 2645mm, rotational speed: 8-3000/min, controls: Siemens SINUMERIK 840D, with documentation, base, stand, crossbar, support and chisel pusher.