- (18)
- Atomáticos de multiuso (22)
- Automáticos de alimentos (3)
- Automáticos de doblaje largo (7)
- Automáticos de doblaje largo CNC (36)
- Bancos de postgiro (3)
- Camas inclinadas CNC (3)
- Centros de torneado CNC (157)
- Centros de torneado horizontal (19)
- Centros de torneado verticales (3)
- Lunetas (13)
- Máquinas de accionamiento central (1)
- Maquinas de doblaje largo CNC (27)
- Máquinas de elaboración final (1)
- Máquinas de mandril de tres levas (1)
- Máquinas giratorias de alta presición (1)
- Máquinas giratorias de presición (9)
- Otros tornos (35)
- Platos de torno (2)
- Tornos (150)
- Tornos automáticos (13)
- Tornos automáticos de barras (2)
- Tornos automáticos husillo de barras (2)
- Tornos automáticos monohusillo de barras (7)
- Tornos automáticos multihusillo de barras (14)
- Tornos cíclicos (37)
- Tornos cíclicos CNC (46)
- Tornos CNC (472)
- Tornos con husillo de cilindrar y roscar (265)
- Tornos de barras (7)
- Tornos de doble husillo CNC (12)
- Tornos de husillos excavados (1)
- Tornos de husillos múltiples CNC (9)
- Tornos de plato horizontal (52)
- Tornos de plato horizontal CNC (25)
- Tornos de precisión (5)
- Tornos de puntas (4)
- Tornos de refrentar (14)
- Tornos de refrentar con contrapunto (4)
- Tornos de retornear (5)
- Tornos de roscado exterior (2)
- Tornos especiales (2)
- Tornos horizontales (5)
- Tornos para mecánicos (25)
- Tornos pesados (27)
- Tornos revólver (4)
- Tornos universales (27)
- Tornos universales de Ø más de 800 mm (7)
- Tornos universales hasta Ø 800 mm (10)
- Tornos verticales (74)
- Tornos verticales (con plato horizontal) de un o dos montantes (2)
- Tornos verticales con husillo roscado autocargador (3)
- Tornos y tornos automáticos (3)
- Tronzadoras (8)
- más
- A.I. HEMBRUG (1)
- AB (1)
- abb (3)
- ACCUWAY (3)
- AERO (1)
- AERZENER (1)
- AFM (3)
- AJAX (1)
- Alex Tech (2)
- ALFING (1)
- ALLG (1)
- AMUTIO (1)
- AMUTIO CAZENEUVE (1)
- AMUTIO-CAZENEUVE (2)
- ARAD (2)
- ARAD ELITE (1)
- ARGUS - FLOWSERVE (1)
- ARIX (1)
- AVM (1)
- AVM ANGELINI (5)
- AX SUPER PRECISION (1)
- AYEL-TECH (1)
- BARUFFALDI (1)
- BAUER (2)
- Benzinger (8)
- BERG (1)
- BERNADO (1)
- Bernardo (21)
- Berthiez (3)
- BEZINGER (1)
- BIGLIA (22)
- Binns + Berry (2)
- BISON (1)
- BOEHRINGER (18)
- BOEHRINGER MAZA (1)
- BOLEY (8)
- BORUI (1)
- BOST (1)
- BRAUN (1)
- BRAUN ZERBST (1)
- Breuning Irco (2)
- BRIGDEPORT (1)
- BRINKMANN (2)
- BUDAPESTI (1)
- BUFFALO (1)
- BULLERI (1)
- Bulmak (3)
- BULMAK / ZMM (3)
- BUMOTEC (1)
- BÖHRINGER (3)
- BöHRINGER VDF (1)
- CABE (1)
- CAORLE (1)
- CARNAGHI (1)
- CAZENEUVE (35)
- CAZENUEVE (1)
- CELORIA (1)
- Chevalier (4)
- CHIAH CHYUN (1)
- CHIAH CHYUN-MUELLER (1)
- CHIRON (1)
- CHOCIANÓW (1)
- CINCINNATI (1)
- CINCINNATI-MILACRON (1)
- CINNCINATI (1)
- Citizen (28)
- CITIZEN CINCOM (1)
- CKD BLANSKO (5)
- CLOVIS (1)
- CMIDURANGO (1)
- CMT (1)
- CMT MASCHINENBAU (1)
- CMT URSUS/EMCO (1)
- CMZ (17)
- CNC GORBREX (5)
- CNC-TAKANG (1)
- Colchester (55)
- COLOMBO (2)
- COLOMBO + LENNA (1)
- COMBI (1)
- Comev (10)
- CONTUR DIALOG (1)
- CORTINI (1)
- CRAVEN (2)
- CS (1)
- D160 (1)
- Daewoo (12)
- DAEWOO (DOOSAN) (1)
- DAEWOO PUMA (1)
- DAH LIH (1)
- DAINICHI (1)
- DALIAN (1)
- DANOBAT (1)
- DE BERNARDI (1)
- DE MOOR (1)
- DECKEL MAHO (1)
- DECKEL-MAHO (1)
- DEFUM (1)
- DEMOOR (1)
- DIEDESHEIM (1)
- ... más
subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 102)
Año de construcción: 1956
usado
Center distance: 3000mm, turning diameter over bed/slide: 520/270mm, spindle bore: 62mm, operating hours: 47,165h, with three steady rests, clamping jaws, rolling center punch, steep taper, drill chuck and tool holder, the oil pump of the gearbox was renewed in 2021. ... más información
usado
Length: 1800mm, width: 1000mm, height: 1800mm, weight: 800kg, the top slide of the machine is defective. ... más información
usado
1.000 € Digital readout: Anilam mini wizard ... más información
Año de construcción: 1999
usado
There are three identical machines available, x-travel: 850mm, z-travel: 160mm, max. workpiece length/ diameter: 80/ 130mm, max. chuck diameter: 160mm, connected load: 48kW, controls: SIEMENS 840D, weight: 9.6t, including one headstock, one of the machines is missing the control cabinet. ... más información
Año de construcción: 1988
usado
number of spindles:6 spindle passage:51 mmArticle: cam-controlled multi-spindle automatic lathe with CNC-pickupManufacturer: SchütteType: SF51Yob: 1988six main spindlesfor bars up to D=51mmCNC-pickup in position 6 with rear CNC-machining;electronic cam control Balluff;independent feed position 4;chip conveyor: magnetic belt;oil/stee-running;additional coolant pump with double filter (magnetic cartridge filter).The machine tools shown and not listed are not part of the scope of delivery.The scope of delivery regarding the tooling equipment could be different like pictures.Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Año de construcción: 1995
usado
There are three EMAG VCS 200 available, connected load: 36kW, without tools, with documentation, were maintained regularly. ... más información
Año de construcción: 2008
usado
Article: Vertical turning and grinding centreManufacturer: EMAGType: VSC 250 DSYob: 2008Control: SIEMENS 840DGrinding spindle speed: 30,000 rpmRotation spindle speed: 3,000 rpmTool places turret: 12Cooler for spindle and machine bed coolingCooling lubricant - lifting station (no independent cooling lubricant supply)Chip conveyorParts handling Air through the spindleTwo clamping circuits through the spindle (air and oil)Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional.Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
usado
Chuck diameter: 400mm, rotational speed: 11.2-560/min, track length: 2900mm, including chucks and chisel holders. ... más información
Año de construcción: 1994
usado
X-travel: 210mm, z-travel: 100mm, operational hours counter: 19,741h, with handling. ... más información
Año de construcción: 1987
usado
number of spindles:8 spindle passage:51 mmArticle: multi spindle automatic latheManufacturer: SchütteType: AF51Yob: 1987eight main spindlesmax. bar diameter D=51mmcontrol SIEMENS SIMATIC S5pick up in pos. 7, for rear machiningthread cutting driveindependent feed in positions 2/3electronical trip dog control ?Balluff?clear text display Wöhrlecoolant pumpmagnetic cartridge filteroil runningincl. bar loader IEMCA PRA 40/37/F, yob 1987, (bundle type)Painting in light blue and light greyThe configuration of tooling will be different like pictures.Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Año de construcción: 2015
usado
X-travel: 100mm, z-travel: 220mm, max. rotational speed: 5000/min, number of workpiece positions: 14, max. swing: 348mm, max. turning diameter: 150mm, controls: Mitsubishi M730 UM, operational hours counter: 4635h, with handling and fire extinguishing system. ... más información
Año de construcción: 2000
usado
X-travel: 400mm, z-travel: 200mm, swing: 210mm, max. rotational speed: 5000/min, controls: FANUC, with handling, machine needs overhauling. ... más información
usado
500 € Teach in lathe, Copper must carry chips and coolant ... más información
usado
There are three identical machines available, two machine have a Bar Loader SAMECA MONOSAM 65 each, including documentation, various accessories and spare parts, were maintained regularly. ... más información
Año de construcción: 1996
usado
Software: Eltro Pilot, controls: Heidenhain Turn Plus (EP90) 1190 V4.6, spindle hours counter: 45,288h, including accessories. Pictures upon request. ... más información
Año de construcción: 2016
usado
X-travel: 189,2mm, y-travel: 101mm, z-travel: 638,3mm, max. rotational speed: 5000/min, swing over bed: 519mm, controls: FANUC Series 331i-MODEL A, connected load: 81.5kVA, length: 2991mm, width: 2289mm, height: 2089mm, weight: 6.57t, operational hours counter: 11.873h, including documentation and accessories.
Año de construcción: 2018
usado
number of spindles:8 spindle passage:67 mmMachine type: CNC controlled multi spindle automatic latheManufacturer: MORI SAYType: TMZ 8/67 CNCYob: 2018Double four-spindle machine, eight-spindle machinewith spindles-drum locking by means of 3 HIRTH-type frontal rings and spindles set for HAINBUCH BZI SK80 colletsequipped with twin CNC systems model SINUMERIK SOLUTION LINE 840D SL for the control of:indexing speed of the spindles drum with bar feed at station 1speed and orientation of each of 8 main spindlesspeed and position of each of 8 frontal slidesspeed and position of each of 7 compound slidesspeed and position of the cut-off slide at station 8for a total of 30 CNC-controlled axes, with the possibility of requesting further upgrades from the manufacturer.Machine equipped with the following optional items:BAR LOADERautomatic bar feeder model PB 60 by CUCCHI BLT for bars L = 3 m, bundle ...
Año de construcción: 2006
usado
Length: 2100mm, width: 1350mm, height: 1800mm, weight: 2.5t, the machine should be overhauled, an inspection is possible. ... más información
Año de construcción: 2016
usado
Article: CNC-controlled multi-spindle automatic latheManufacturer: TornosType: MultiSwiss 8x26Yob: 2016full cross slide configuration,counter spindle,part-pre-drawing device,2 x driven tools,3 x Y-axis,1 rigid backworking,1 x driven backworking,2x 80 bar high pressure pumpsoptional: setting robot, manufacturer HandlingTech.The scope of delivery regarding the tooling equipment could be different like pictures.Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com
usado