tornos usadas para la venta

+ Guild Master DMG 310 Eco + CNC lathe + Siemens 3D 810D Powerline + 2009 + Technical data: see pictures If you have any further questions, please call or write in WhatsApp under 004915161464290.  ... más información

Machine was no longer connected after moving, machine is not energized. It is sold as a spare parts donor or as defective. Machine incl. IEMCA Bar Feeder 3.85td (see pictures)  ... más información

Lathe with accessories and tool cabinet Tip height 250mm Center width 1000mm Lining 250mm Speeds: 11.2-1120 Feed rate 0.05-1.4mm Spindle bore 65mm Drive 7.5 KW Weight approx. 2.2 tons with documentation good general condition Machine was used little  ... más información

turning diameter:1300 mmturning length:5300 mmcontrol:FAGOR 8055 max. swing over slide:900 mmspindle bore:150 mmtransmission ratio:2, automatisch schaltend taper of tailstock quill:6 MKautomatic tool changer:4-fach elektrisch CNC controller:FAGOR 8055, NEU control cabinet Siemens PLC:NEU New CNC lathe KRAFT ST 500/3000 with FAGOR 8055Made in EuropeFor more information please see the attached documents

turning diameter:175 mmturning height:70 mmchucking diameter:175 mm ... más información

This Okuma LB15-II horizontal turning machine was manufactured in 1998. It features a 12-station tool holder, hydraulic tailstock, and a chip removal system. With a maximum turning diameter of Ø 340 mm and a distance between centers of 1020 mm, its equipped for various machining tasks. The spindle speed can reach up to 3500 rpm, ensuring efficient operations. Consider the Okuma LB15-II machine we have for sale. Contact us for further details regarding this horizontal turning machine.

turning diameter:280 mmturning length:250 mmcontrol:Fanuc 0i TF swing diameter over bed slide:280 mmBar capacity:44 mmspindle speeds:4800 1/minx-travel:155 mmy-travel:+/-35 mmz-travel:250 mmrapid power traverse in X-and Z direction:30 m/minspindle drive:11/15 kWMachine size (LxWxH):1.842x2.793x2.446 mmmachine weight:5000 kgfeeds:0.001-500 mm/Uc-axis:0.001 °turret:16-fach, BMT-55 type Y-axis:über Revolver mmhollow chuck:hydr. 200 mm:8 bartailstock:ohne! brand new CNC turning center with Contains:1. Control system Fanuc Oi-TD (8,4" LCD monitor)2. X/Z-axis stroke 200/600 mm3. X/Z-axis rapid traverse 30/30 M/MIN4. Spindle motor 11 / 15 Kw5. Spindle speed 3500 rpm (Belt driven type)6. Spindle bearing dia. Ø 120 mm7. Bar capacity Ø dia 64 mm8. CS axis function 0.001 degree spindle positioning9. Hydraulic Hollow chuck 10" x 3 jaws10. Hyd. unit for chuck with air cooler11. Power turret syst ...

This vertical turning machine was manufactured in 2011. The EMAG VLC 250 features a Siemens Sinumerik 840Dsl control system, a 12-station tool turret, and a 3-jaw power chuck with a quick jaw change system. It includes a coolant system with a paper band filter and an electrostatic emulsion mist extractor. Ideal for handling workpieces up to 175mm in height and 12kg in weight. For more information about this vertical turning machine, please reach out to us.

This 3-axis Okuma LB 15-II M horizontal turning machine was manufactured in 1995. It features an OSP 7000 L control, a 12-station tool holder, hydraulic tailstock, and a chip removal system. The machine supports a maximum turning diameter of Ø 340 mm and a distance between centers of 1020 mm. Its equipped with a spindle speed up to 3500 rpm and a rapid feed rate on the Z axis of 20,000 mm/min. For more information about this horizontal turning machine, please reach out to us.

This 4-axis DMG Gildemeister CTV 160 vertical turning machine was manufactured in 2010. It features a Siemens Sinumerik 840D ERGOline control system, a 12-station tool turret, and a Schunk ROTA THW PLUS 165-43 power chuck. The machine includes a KUKA KR5 sixx R850 robot with a 3-finger centric gripper and a camera system for part recognition. Ideal for high-precision tasks, the DMG Gildemeister CTV 160 machine we have for sale. Contact us for more information.

turning diameter:402 mmturning length:750 mmcontrol:FAGOR 8037 turning dia. over face-slide:245 mmturning diameter over bed slide:380 mmbed width:250 mmspindle taper:A2-5 spindle speeds:40~2800 (3 Stufen) 1/min.spindle bore:42 mmtailstock quill diameter:58 mmtailstock quill stroke:180 mmtaper of tailstock quill:4 MKmax. length of work piece:750 mmpower requirement:4 kWweight of the machine ca.:1050 kgdimensions of the machine ca.:2000x1115x1670 (LxBxH) mmturret:8 fachCNC controller:FAGOR 8037 electronic hand wheel:für X- und Z-Achse New CNC lathe KRAFT ST 285/1000 with Fanuc Oi Mate TDMade in EuropeFor more information please see the attached documents

turning diameter:360 mmturning length:530 mmcontrol:SIEMENS 828D (10,4"DISPLAY WITH SHOPTURN) swing diameter:690 mmswing diameter over bed slide:360 mmBar capacity:64 mmspindle speeds:3500 1/minspindle speed:Gegenspindel: 5000 1/minx-travel:230 mmy-travel:±51 mmz-travel:600 mmrapid power traverse in X-and Z direction:30 m/minspindle drive:17 (Hauptspindel) kWspindle drive:5,5/7,5 (Gegenspindel) kWMachine size (LxWxH):3290x2180x2337 mmmachine weight:6100 kgc-axis:0.001 °turret:12-fach, BMT-65 type mit integrierter Y-Achse Y-axis:über Revolver mmhollow chuck:hydr. 250 mm (Hauptspindel)/ hydr. 150 mm (Gegenspindel) :8 barhydraulic unit:mit Kühlung tailstock:ohne! soft jaw:1 Tool setter:manuell Warranty:12 months on parts Boring bar holder:radial und axial, jeweils 2 Stück brand new CNC turning center with Contains:1. Control system Fanuc Oi-TD (8,4" LCD monitor)2. X/Z-axis stroke 20 ...

turning diameter:402 mmturning length:1000 mmcontrol: 8055 turning dia. over face-slide:245 mmturning diameter over bed slide:380 mmbed width:250 mmspindle taper:A2-5 spindle speeds:40~2800 (3 Stufen) 1/min.spindle bore:42 mmtailstock quill diameter:58 mmtailstock quill stroke:180 mmtaper of tailstock quill:4 MKmax. length of work piece:750 mmpower requirement:4 kWweight of the machine ca.:1050 kgdimensions of the machine ca.:2250x1115x1670 (LxBxH) mmturret:Multifix CNC controller:FAGOR 8055 electronic hand wheel:für X- und Z-Achse New CNC lathe KRAFT ST 285/1000 with Fanuc Oi Mate TDMade in EuropeFor more information please see the attached documents

turning diameter:300 mmturning height:300 mmtotal power requirement:70 kWweight of the machine ca.:11,5 t ... más información

turning diameter over bed:650 mmturning diameter over slide:450 mmturning length:1435 mmbed width:350 mmspindle bore:155 mmspindle speed:50-800 (3 stufig, stufenlos) U/minspindle taper:A2-11 longitudinal feeds::0,05-1,5 cross feeds::0.025 - 0.752 tailstock quill stroke:220 mmtailstock quill diameter:95 mmtailstock quill taper MT:5 MKtool post size:25x25 mmpower requirement:7,5 kWweight of the machine ca.:2400 kgdimensions:3020x1140x1770 mmDRO:von FAGOR 3 Achsen Modell 40iTS mit konstanter Schnittgeschwindigkeit fixed steady:Option follower rest:Option tool holder:4-fach 3 jaw chuck Ø:400mm, vorne und hinten (2 Stück), mit Bohrung 155mm, und 2 Satz weiche Backen splash guard:am Schlitten mit Mikroschalter anti vibration pads:6 StückFactory new center lathe with 2-axis digital display and variable speed and many more.CHARACTERISTICS:Powerful, flexible and productiveWith an optimal pric ...

turning diameter over bed:1630 mmturning diameter over slide rest:1190 mmturning length:5000 mmcentre height:800 mmswing in gap:2100 mmbed width:1000 mmmax. workpiece weight:12000 (zw. Spitzen) kgnumber of spindle speeds:16 4 - 242 U/minspindle bore:120 mmtailstock quill diameter:180 mmtailstock quill stroke:350 mmWeight approx.:22 ttotal power requirement:ca. 25 kwHeight of centres: 1350 mmDistance between centres: 5000 mmSwing over cross slide: 2600 mmSpindle power: 30 HPSpindle speed: 0,7 - 70 rpmLongitudinal swiftControl on the carriageChuck: diam. 2050 mm

turning diameter over bed:2300 mmturning diameter over slide rest:1860 mmturning length:5000 mmcentre height:1150 mmswing in gap:- mmlength of gap:- mmfaceplate:1500 mmbed width:1000 mmmax. workpiece weight:zw. Spitzen: 15000kg, m. Lünette: 20000 kgnumber of spindle speeds:3-300 U/minspindle bore:206 mmtailstock quill diameter:- mmtailstock quill stroke:- mmWeight approx.:26 tspindle drive:50 kWDRO:optional 4 jaw chuck:1500 mmHeight of centres: 1350 mmDistance between centres: 5000 mmSwing over cross slide: 2600 mmSpindle power: 30 HPSpindle speed: 0,7 - 70 rpmLongitudinal swiftControl on the carriageChuck: diam. 2050 mm

turning diameter:570 mmturning length:2000 mmcontrol:FANUC O i TF turning diameter over bed slide:490 max. swing over slide:360 mmbed width:350 mmspindle taper:A2-8 spindle speeds:0-2500 1/min.spindle bore:80 mmtailstock quill diameter:95 mmtailstock quill stroke:220 mmtaper of tailstock quill:5 MKmax. length of work piece:2000 mmchuck size:250 mmrapid traverse x/z:15/12 m/minpower requirement:11 kWweight of the machine ca.:2970 kgdimensions of the machine ca.:3325x1350x1810 mmautomatic tool changer:12-fach, VDI 30 3-jaw hydraulic chuck:250 mmtools:1 Satz New CNC lathe KRAFT KT 285/2000 with Fagor 8055.Made in Europe, Picture similiar.For more information please see the attached documents

number of spindles:8  ... más información

faceplate diameter:5700 mmswing diameter:6300 mmturning height:4000 mmtotal power requirement:DC 110 kWworkpiece weight max.:100 ttable speeds:0.2 ~ 20 U/minTorque:des Tisches 300 kN.mslide stroke:vertikal: 2000 mmram diameter:280 mmrapid traverse:2000 mm/mincontrol:CNC Siemens oder Fanuc _head swivability:-15°?+30 °weight of the machine ca.:127 tRams:2 New CNC Vertical Turret Lathe - Double Column with Siemens 828D or Fanuc 0i TF and extensive accessories.Further technical details and accessories appearing in Appendix.