tornos usadas para la venta

max. turning diameter:102 mmturning length:450 mmswing dia.:494 mmbar material dia.:65 mmspindle turning speed - stepless:S1 / S2: 4.000 1/minspindle drive:S1 / S2: 18,6 / 11 kWTurret No.1 stations / rotary tools:10/10 VDI 30 Turret No.2 stations / rotary tools:10/10 VDI 30 Driven Tools:8.000 1/minwork piece power:3,7 kWtotal power requirement:90 kVAweight of the machine ca.:10 tdimensions of the machine ca.:6 x 2,5 x 2, mCNC-turning-center with 2 turrets,8 axis,2x 10-pockets turrets with live-tools, C-axis on both spindles,Y-axis +-35mm turret 1,2pcs. collet-chucks,chipconveyor,barfeeder,tooleye,approx. 60.000h "machine on", approx. 17.500h "spindle on"

:GN-1000 | GN-1250 | GN-1500 | GN-1750 turning diameter:1000|1250|1500|1750 mmturning length:1500/2000/3000/4000/5000/6000/8000 mmcontrol:Siemens 828D turning diameter over slide:830|1080|1330|1580 mmbed width:820 mmspindle nose:A2-11/A2-15/A2-20/A2-20 spindle bore:155/250/305/380 mmspindle turning speed - stepless:4-600/4-400/4-400/4-300 U/minx-travel:750 mmz-travel:2000/3000/4000/5000/6000/8000 mmrapid power traverse in X-and Z direction:6 m/minservo motor X-axis:3 kw Fanuc / 3,3 kw Siemens servo motor Z-axis:4 kw Fanuc / 4,3 kw Siemens tailstock quill stroke:300 mmtailstock quill diameter:200 (295 opt.) mmtaper in tailstock:6 MKtool turret:8/10/12 fachtool holder -shaft diameter:32 (40 opt.) mmmain drive motor:30 (37 opt.) kWweight of the machine ca.:9/10/11/12/13 tpositioning accuracy:+0.01 / 300 mmrepeating accuracy:+0,005 mmmachine length:5000/6000/7000/8000/9000/10000 mmmachine  ...

turning diameter:810/680 mmturning length:2.500 mmcentre distance:3.040 mmswing diameter over bed slide:530 mmspindle bore:145 mmturning speed range:10 - 2.000 1/minspindle drive:76 / 63 kWturret (x-stations):12 Pos.tool taper:VDI 60 Torque:1150 / 4005 Nmrapid travel range:X12 / Z12 m/minmax. workpiece weight between centers:4.000 kgmax. workpiece weight -without tailstock:630 kgtotal power requirement:140 kVAweight of the machine ca.:17,6 tdimensions of the machine ca.:7,7 x 2,85 x 2,7 mCNC-lathe with tailstock - live tools 12 / 8 kW (85 / 105Nm),- spindle 2,5° indexing,- steady 50 -200mm,- hydr. 3-jaw-chuck,- chipconveyor, coolant device,- tailstock,tailstock quill:- MT 5,- dia. 160mm,- stroke 285mm,

turning diameter:2000 mmturning length:1500/2000/3000/4000/5000/6000/8000 mmcontrol:Siemens 828D turning diameter over slide:1640 mmbed width:820 mmspindle nose:A2-11/A2-15/A2-20/A2-20 spindle bore:155/250/305/380 mmspindle turning speed - stepless:4-600/4-400/4-400/4-300 U/minx-travel:750 mmz-travel:2000/3000/4000/5000/6000/8000 mmrapid power traverse in X-and Z direction:6 m/minservo motor X-axis:3 kw Fanuc / 3,3 kw Siemens servo motor Z-axis:4 kw Fanuc / 4,3 kw Siemens tailstock quill stroke:300 mmtailstock quill diameter:200 (295 opt.) mmtaper in tailstock:6 MKtool turret:8/10/12 fachtool holder -shaft diameter:32 (40 opt.) mmmain drive motor:30 (37 opt.) kWweight of the machine ca.:9/10/11/12/13 tpositioning accuracy:+0.01 / 300 mmrepeating accuracy:+0,005 mmmachine length:5000/6000/7000/8000/9000/10000 mmmachine width/height:2500 x 2400 mmmax. workpiece weight between centres:900 ...

:KTH 500 turning diameter:1010 mmturning length:2000/3000/4000/5000 mmcontrol:Siemens/Fanuc/Fagor max. swing over slide:718 mmbed width:500 mmspindle taper:A2-8/A2-11/A2-15/A2-20 spindle speeds:0-1400/0-1000/0-750/0-560 1/min.spindle bore:130/155/230/310 mmtransmission ratio:2 feed range:0-8500 (Z-Achse), 0-6000 (X-Achse) mm/minrapid traverse x/z:7,5/10 m/mintailstock quill diameter:120 mmtailstock quill stroke:300 mmtaper of tailstock quill:6 MKpower requirement:22 kWweight of the machine ca.:6400/7600/8800/10000 kgdimensions of the machine ca.:4600/5600/6600/7600 x 2190 x 2315 mmautomatic tool changer:8-fach CNC controller:Siemens/Fanuc/Fagor tools:1 Satz CNC controls from:Siemens/Fanuc/Fagor New CNC lathe KRAFT ST 500/3000 with Fanuc Oi TDMade in EuropeFor more information please see the attached documents

bar material dia.:51 mmturning length:644 mmturning dia. over bed:600 mmturning diameter over slide:430 mmy-axis:100 (+-50) mmturning speeds:2x 5.000 1/minpositive location each:2x C-Achse, 0,001° GradSub spindle:ja/yes turret (x-stations):2x 12 VDI 30 Pos.driven tools:2x 12 Pos.turning speeds:2x 4.000 1/mincontrol:FANUC 18 iTB total power requirement:30 kVAweight of the machine ca.:8 tdimensions of the machine ca.:3,5 x 2,5 x 2,3 mturning- milling center with Y-axis,collet device on main and subspindle,high pressure pumps 2x 14bar,parts catcher/conveyor,barloader ENTL 10-65,chip conveyor,lot of accessoriesapprox. 54.500 hours "machine on", 30.500 h "automatic", 14.000 h "feeding"

:KTH 400 | KTH 500 turning diameter:805 | 1010 mmturning length:1000/2000/3000/4000/5000 mmcontrol:Siemens/Fanuc/Fagor max. swing over slide:515 | 718 mmbed width:425 | 500 mmspindle taper:A2-8 (opt. A2-11, A2-15 oder A2-20) spindle bore:105 (opt. 155/230) | 130 (opt. 155/230/310) mmtransmission ratio:2 feed range:0-8500 (Z-Achse), 0-6000 (X-Achse) mm/minrapid traverse x/z:7,5/10 m/mintailstock quill diameter:106 | 120 mmtailstock quill stroke:215 | 300 mmtaper of tailstock quill:6 MKpower requirement:17 | 22 kWautomatic tool changer:8-fach mit 4-Werkzeughaltern CNC controller:Siemens/Fanuc/Fagor tools:1 Satz :aus massiven Gusselementen CNC controls from:Siemens/Fanuc/Fagor New CNC lathe KRAFT ST 500/3000 with Fanuc Oi TDMade in EuropeFor more information please see the attached documents

:JAP 500 turning diameter:1010 mmturning length:2000/3000/4000/5000 mmcontrol:Siemens/Fanuc/Fagor max. swing over slide:718 mmbed width:500 mmspindle taper:A2-11 (opt. A2-11, A2-15, A2-20) ASAspindle speeds:0-1400 (opt. 0-1000, 0-750, 0-560) 1/min.spindle bore:130 (opt. 155,230,310) mmtransmission ratio:2 feed range:0-8500 (Z-Achse); 0-6000 (X-Achse) mm/minrapid traverse x/z:7,5/10 m/mintailstock quill diameter:120 mmtailstock quill stroke:300 mmtaper of tailstock quill:6 MKpower requirement:17 kWweight of the machine ca.:6400/7600/8800/10000 kgdimensions of the machine ca.:4600/5600/6600/7600 x 2270 x 2290 mm:gem. 8605 DINautomatic tool changer:8-fach (Schaft: 32x32mm und Bohrstange:Ø50mm), Hersteller Duplomatic oder Barufaldi mit 4 Haltern CNC controller:Siemens 828D/Fanuc 0iTF/Fagor 8060T tools:1 Satz gear box:von Barufaldi, 2-stufig spindle:Hochpräzisionsspindel CNC controls from: ...

turning diameter over bed:42 mmturning diameter over longitudinal slide:42 mmturning length:110 mmcontrol:FANUC 31 i model B spindle speed::25 - 6000 1/minspindle:5,5 / 7,5 kWspindle hollow:42 mmtotal power requirement:25 kVAweight:3,3 tspace requirements approx. LxWxH:2,95 x 1,55 x 2,15 mCNC-lathe, NEW , from showroomwe have 4 new machines in our stockCNC long center lathe with moved spindle and subspindleprepaired for bar loader up to 42 nmm 7 axis ( X Z Y C Z2 X2 C2 ) 5 pcs. toolholder 20 x 20 mm5 pcs. drill holder4 pcs. driven tools , max. 6.000 rpm4 pcs. driven tools from backside , max 5.000 rpm swarf conveyer,high pressure cooling systemhollow clamping device,eletr. handwheelhydraulic hollow clamping cylinder front- and backsideclamping system on both sides Hainbuch SK 52 0 h "machine on", 0 h "spindle on" !

turning diameter over bed:530 mmturning diameter over slide rest:320 mmturning length:2000 mmcenter height over bed:275 mmspeeds:18 - 1600 U/minspindle bore:60 mmbed width:430 mmengine output:17 kWweight:2700 kgspindle taper:7 dimensions of the machine ca.:5,5 x 1,40 x 1,75 m- 3-chaw chuck Röhm D = 350 mm - tool holder system - approx. 10 pcs. tool holder- workpiece wheigt between centers 500 kg - many accessories in 2 pcs. tool cabinets

turning diameter:620 mmturning length:1000/1500/2000/3000 mmcontrol:Fanuc/Fagor/Siemens max. swing over slide:540 mmbed width:350 mmspindle taper:As-8 spindle speeds:0-2500 1/min.spindle bore:105/155 mmtransmission ratio:1 tailstock quill diameter:95 mmtailstock quill stroke:220 mmtaper of tailstock quill:5 MKmax. length of work piece:1000/1500/2000/3000 mmrapid traverse x/z:15/12 m/minpower requirement:11 kWweight of the machine ca.:2300/2515/3010/3700 kgautomatic tool changer:8-fach electric handwheel:x-/z-Achse New CNC lathe KRAFT ST 310 Series with Fanuc/Fagor/Siemens controlMade in EuropeFor more information please see the attached documents

turning diameter over bed:500 mmturning diameter over slide rest:300 mmturning length:1000 mmspindle turning speed range:16 - 535 U/minno. of turning speeds:12 spindle bore:55 mmoperating of tailstock-quill:240 mmtailstock taper MT:4 dimensions of the machine ca.:2,7 x 1,4 x 1,4 mtotal power requirement:7,5 kWmachine weight ab.:2000 kg

turning diameter:570 mmturning length:1000/1500/2000/3000 mmcontrol:Fanuc/Fagor/Siemens max. swing over slide:490 mmbed width:350 mmspindle taper:As-6 spindle speeds:0-3000 1/min.spindle bore:80 mmtransmission ratio:1 tailstock quill diameter:95 mmtailstock quill stroke:220 mmtaper of tailstock quill:5 MKmax. length of work piece:1000/1500/2000/3000 mmrapid traverse x/z:15/12 m/minpower requirement:11 kWweight of the machine ca.:2250/2475/2970/3640 kgautomatic tool changer:8-fach electric handwheel:x-/z-Achse New CNC lathe KRAFT ST 285 Series with Fanuc/Fagor/Siemens controlMade in EuropeFor more information please see the attached documents

turning diameter:450 mmturning length:1000/1500 mmcontrol:Fanuc/Fagor/Siemens max. swing over slide:260 mmbed width:300 mmspindle taper:As-6 spindle speeds:0-3000 1/min.spindle bore:65 mmtransmission ratio:1 tailstock quill diameter:68 mmtailstock quill stroke:200 mmtaper of tailstock quill:4 MKmax. length of work piece:1000/1500 mmrapid traverse x/z:15/12 m/minpower requirement:9 kWweight of the machine ca.:1400/1680 kgautomatic tool changer:8-fach electric handwheel:x-/z-Achse New CNC lathe KRAFT ST 225 Series with Fanuc/Fagor/Siemens controlMade in EuropeFor more information please see the attached documents

turning diameter:650 mmturning length:2000 mmface slide travel:445 mmturning diameter over slide:260 mmturning speeds:1-2.000 1/mintransmission ratio:2 spindle:33 / 22 kWspindle bore:130 mmquill stroke:200 mmturret head:12 Pos.workpiece weight max.:2.560 kgtotal power requirement:38 kWweight of the machine ca.:6 tdimensions of the machine ca.:5 x 2,6 x 1,9 mteach in lathe,SAUTER-turret with 12 pos. (6 for live tools),VDI 40,SMW 3-jaw-chuck dia 400mm,tailstock,steady 100-250mm,C-axis,chipconveyor,free contour-programming, memory 256kB,accessoriesno hour meter, max. 1 shift

turning diameter:360 mmturning length:750/1000 mmcontrol:Fanuc/ Fagor/ Siemens max. swing over slide:300 mmbed width:250 mmspindle taper:As-5 spindle speeds:0-4000 1/min.spindle bore:42 mmtransmission ratio:1 tailstock quill diameter:58 mmtailstock quill stroke:180 mmtaper of tailstock quill:4 MKmax. length of work piece:750/1000 mmrapid traverse x/z:15/12 m/minpower requirement:7,5 kWweight of the machine ca.:1200/1490 kgautomatic tool changer:8-fach electric handwheel:x-/z-Achse New CNC lathe KRAFT ST 180 Series with Fanuc/Fagor/Siemens controlMade in EuropeFor more information please see the attached documents

:KDM-12 | KDM-16 | KDM-20 | KDM-23 faceplate diameter:1000|1400|1800|2000 mmswing diameter:1250|1600|2000|2300 mmturning height:1000 (opt. 1400)|1000 (opt. 1400)|1250 (opt. 1650)|1250 (opt. 1650) mmtable speeds:5 - 200 (2-360 opt.)|5 - 160 (2 - 300 opt.)|3,2 - 100 (2-200 opt.)|3,2 - 100 (2-180 opt.) 1/mintransmission ratio:4 (variabel in jeder Stufe) max. workpiece weight:4|6|8|10 tmax. torque on the faceplate:20|25|25|25 KNrapid feed of tool post:8000|3000|3000|3000 mm/minfeed speeds:0.1 - 500 mm/minMax. cutting force of tool head :18|25|30|30 KNmTravel of Ram (vertical):600|800 (1000 opt.)|800 (opt. 1000)|800 (opt. 1000) mmTravel of ram (horiz.):850|1000|1115|1400 mmCross rail travel :600|850/1000 (optional)|890/1240 (optional)|990/1240 (optional) mmpower maindrive:22/30|30/37|37/45|37/45 kWweight of the machine ca.:9|12,5|18,5|20,5 tMachine size (LxWxH):2360x2277x3403|2660x2660x3698|3 ...

equipped with Fagor XYZ digital counter, motor power 15kv ... más información

This lathe was manufactured in 2015 by DMG, Sprint 65 3 T model. The machine represents a reliable and versatile addition to your production line. If youre interested in buying this DMG Sprint 65 3 T lathe, reach out for further details. ... más información

turning diameter over bed:402 mmturning diameter over slide rest:245 mmturning length:750/1000 mmcentre height:200 mmbed width:250 mmmax. workpiece weight between centres:280/300 kg:135 kgspindle bore:42 mmspindle turning speed range:40-2300 (3 Getriebestufen) U/minlongitudinal feed:0.05-0.752 mm/Ucross feed:0.025-0.376 mm/Umetrical thread cutting:0.5 - 7,5 mm/Uthreading WHITWORTH:60-4 TPIrange of module thread:0,25-3,75 mm:120-8 mm/min.diameter of quill:58 mmsleeve conus:4 MKquill stroke:180 mmfixed steady::Ø 10-125 (110-200 opt.) mmwith live steady:Ø 10-80 mmpower requirement:4 kWcenter morse:2 StückBrand new Center Lathe KRAFT DLZ 200 SeriesMore information can be found in the appendix