trabajo con chapas de metal usadas para la venta

pressure:320 tchamfer lenght:4100 mmdistance between columns:3600 mmcolumn arm:410 mmram stroke speed:140 mm/secreturn speed:150 mm/secworking speed:10,5 mm/secwork stroke:375 mmdayligth:650 mmtable height:900 mmtable width:220 mmoil volume:400 lvoltage:400 Vtotal power requirement:30 kWweight of the machine ca.:22600 kgdimensions of the machine ca.:5350 x 2450 x 3150 mm1 brandnew ERMAK SPEED-BEND 4.320 hydr. press brake, directly from the factory, with DELEM DA 66 T CNC control and following equipment:- controlled back gauge with R-axis X = 800 mm R = 250 mm- finger adjustment Z1 + Z2 through ball screw- 2 front support arms - controlled axis Y1-Y2-X-R-Z1-Z2 + CNC-crowning system4- top tool - 4V universal die-block- BOSCH/HOERBIGER hydraulic system- SIEMENS electronic- SICK light barrier- FISSLER AKAS laser-light barrier- double foot switch- CE mark / conformity declaration- operation ...

Hydraulic press brake 160t / 3200mm with controller E21 (automatic adjustment of the back stops). The status of the new machine Year 2016 ... más información

The machine is in good technical condition. Max. sheet length: 3000 mm Max. sheet thickness: 4 mm Weight: 4400 kg Upon prior agreement, the possibility of an inspection in progress. ... más información

Capacity: 3100 x 135 tons Cybelec DNC 880s CNC control Y1, Y2, X and R axis CNC controlled CNC Bombing Laser front ... más información

The machine is in good technical condition. Maximum cutting length: 2500 mm Maximum sheet metal cutting thickness: 8 mm Total power: 20 kW Machine height: 1855 mm Machine length: 3115 mm Machine width: 3078 mm Machine weight: 7625 kg The machine is functional, filling with hydraulic oil with replacement of the rubber bellows and by partially resealing the piston rods, carried out in 2019. Now it is necessary to replace the blades and reseal. Control system original. The electrical system is fine. By prior arrangement, the possibility of a tour in progress.

Description: SPECIFICATIONS Character: NN Type: 750 Machine dimensions (L×W×H): 4,850 x 1,250 x 2,000 mm Measuring length: 750 mm Power main drive: 22 kW Electric drive: Yes Hydraulic drive: Yes Machine weight: 7,500 kg Scrap shear: Hydraulic lower holderweight approx.: 7,500 kg, Approx. Onsite Dimension. (l x w x h): 5,200 x 1,500 x 2,000 mm

EVG Complete mesh welding line - Max. Width mesh - 2.400 mm - Max. Length mesh - 6.000 - Wire diameter range – 4 mm - 12 mm - Max. speed - 70 strokes / min. -Longitudinal wire spacings 100 mm, 150 mm, 200 mm -Cross wire spacings 100 mm, 150 mm, 200 mm -Longitudinal and cross wiress are from piece. -The line is complete and still in working condition served by one man. -Machine can be seen in factory.

Description: SPECIFICATIONS Character: HPM Type: Steelmax Year built: 2008 Plasma cutting machine: Yes Capacity: 2,100 x 4,250 mm Table length: 2,100 mm Panel width: 4,250 mm including drill and tap unitweight approx.: 12,500 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 6,600 x 2,300 mm ... más información

4-roll Hydraulic plate bender 8000 x 40 mm. 1960 Froriep 8000Х40 mm Plate rolling machine - 4 rolls 8000Х40 mm ... más información

Description: SPECIFICATIONS Character: Boldrini Horizontal: Yes Roll length: 650 mm Machine weight: 5,000 kgweight approx.: 5,000 kg, Approx. Onsite Dimension. (l x w x h): 2,300 x 1,600 x 2,100 mm ... más información

The machine is in good technical condition. Max. length of cut sheet: 2000mm Max. thickness of the cut sheet: 6.3 Weight: 6725 kg Upon prior agreement, the possibility of a tour in progress. ... más información

Description: Serial Number: A15.564 CNC : TRUMPF Main Drive , Punching Force : 180 KN Max. sheet thickness: 6.4 mm Strokes: ,  ,X-AXIS: 1250 mm  ,Y-AXIS: 1280 mm Max. workpiece thickness , Steel: 4 MM Max. workpiece weight: 75 kg , Max. workpiece height: 38 mm , Programmable force: 4000-17000kn Speeds: , X-axis: 90 m/min Y-axis: 60 m/min Simultaneous: 108 m/min Power: 400 V / 50 HZ Installed power: 17 KVA Important note: , The machine is currently stored as shown in pictures 5-12.  ,max. punching diameter: 76 mm, weight approx.: 9,200 kg, Approx. Onsite Dimension. (l x w x h): 5,530 x 2,300 x 2,255 mm

We sell Turret punch press - MP10-30 used, 2007, manufacturer JIANGSU YANGLI GROUP CO. Possible leasing, rent-to-own. They are also interested in intermediaries with a place to store equipment (they are ready to pay for rent). MP10 CNC series punching machine has a body structure (ZL2004 2 0108852.4), which adopts tempering treatment. German I + L. The hydraulic system has reliable performance and low power consumption (1 1 kW). FANUC CNC system OIS or SIEMENS 840D is used on this punch series. The revolving type (ZL 022 1821 1.X) features a long sleeve structure and the station index has a sectional wheel and a worm gear.

plate width: 1,524 mm, plate length: 2,540 mm, plate thickness: 0,5 - 3,5 mm, max. punching diameter: 33 mm, weight approx.: 21,000 kg, Approx. Onsite Dimension. (l x w x h): 21,000 x 7,000 x 2,500 mm ... más información

sheet width:2000 mmplate thickness:1.8 mmControls:SIEMENS S7 PRESS DESIGN:. - frame design : H-frame :. - openings in uprights : yes :. - opening in table : yes :. - moving bolster : yes :. PRESS TABLE:. - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - height above floor level:375 mmRAM:. - ram force:800 to - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - stroke:350 mm - number of strokes max:55 /minRAM (MECHAN. PRESS):. - ram adjustment:350 mmTOOL ASSEMBLY DIMENSIONS:. - shut height (stroke down, adjustment up):1100 mm - distance between columns (H-frame):3100 mm - Free passage between side columns (width):2560 mm - Free passage between side columns (height):1500 mmDECOILER:. - design : single coil :. - sheet width max:2000 mm - sheet width (min):400 mm - max. weight of coil:30 to - max. di ...

Valley. Crank shears with an inclined blade for a sheet of 20x2000 mm, model NLZ427B, are designed for cutting sheet metal with a thickness of up to 20 mm and a tensile strength of S 500 MPa. Scissors can be used in the procurement workshops of metal structures, machine-building enterprises, repair and other plants, when used in climatic zones with a temperate and cold climate version UHL, dry and humid tropical - version O; placement category 4 according to GOST 15150 - 69 The lower value of the air temperature must be at least +5 0С. Designed for cutting metal up to 20mm thick 1. Maximum cutting force, kN 1000 2. The largest dimensions of the metal being cut with temporary 3. resistance

Description: Drum capacity: 400L Average filling weight: 600 kg Width of inner drum: 920 mm Max working dimension: 850x200 mm Max piece weight: 30 kg Motor: 400v, 50 hz, 3kW Rotation drum: 4-18 rpm Applications: Deburring, Degreasing, De-oiling, Decalcifying, Rust removal, Polishing Approx. Onsite Dimension. (l x w x h): 3,000 x 1,500 x 2,000 mm, weight approx.: 1,800 kg

Type: CTO 80/2500 Parameters: 80 t, 2500 mm Manufacturer: Strojárně Piesok Year of production / SO / GO: - / - / - Description: The machine is in good technical condition. Nominal forming force: 80t Working table length: 2500mm Maximum stroke: 150mm Maximum distance of the table from the ram: 360mm Working height: 800mm Dimensions LxWxH: 3700 x 1250 x 2385mm Machine weight: 6550kg Upon agreement, the possibility of a tour in progress.

Description: Max Thickness: Mild steel: 6 mm , Max Thickness Stainlesssteel: 4 mm , Strokes: 14/min Table height: 880 mm , Table width: 500 mm ,  ,plate thickness: 6 mm, cutting angle adjustment: 1 °, weight approx.: 5,650 kg, Approx. Onsite Dimension. (l x w x h): 1,950 x 3,900 x 1,700 mm

The line has undergone commissioning and is in good condition. Not used. It is under conservation. Rod diameter from 5mm to 12mm; Mesh width 800mm-2500mm; The pitch between the axes of the transverse rods (multiples of 50mm) is from 50mm to 300mm; The pitch between the longitudinal bars is from 100mm to 300mm; Welding speed of cross bars is 55-80 cycles/min. n Line composition: Main machine - 1 piece; Chiller - 1 piece; Compressor - 1 pc.; Dryer - 1 pc.; Receiver 1000 liters - 1 piece; Operator control panel (in Russian) - 1 pc. Optional equipment: The machine cuts correctly. Rod diameter from 5mm to 12mm; The length of the rods is 6 m; Speed 130m/mi. Specifications Power supply: alternating three-phase current 380V 50 Hz; Cascade welding mode; Transformer power 150 kW - 12sh; Peak power 315-630 kW; Nominal pressure, air flow 06.-10.0MPA, 130m3; Supply voltage 3 p ...