subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 107)
Description: Machine no. 4014 SIN840D control x- travel , 10000 mm y- travel , 1000 mm z- travel , 500 mm Profile length 7,200 mm Profile width 300 mm Profile height 300 mm Workpiece dimensions max. 8,000 x 1,000 x 300 rpm Spindle speeds - continuously variable 1 - 24,000 rpm Drive power 15.00 kW Feed X / Y axis 1 - 60,000 mm / min. Feed Z-axis 1 - 20,000 mm / min. B - axis +/- 180 ° C - axis 360 ° Tool holder HSK-A50 Tool magazine: 24 Tool length - max. 240 mm Tool diameter 95 mm Tool diameter with 2 free spaces 200 mm Saw blade diameter max. 350 mm Working area 7,200 x 300 mm Description: 5-axis high-speed machining centre with SIEMENS SINUMERIK840D control system, RECKERTH high-frequency spindle, 8 carrier units, each with a pneumatically actuated clamping device, arranged in the Y-direction and in the X-direction X-direction via a programme-controlled positioning axi ...
machine for marking and cutting rolled metal - corner TBL 2020 Production China. There are all documents. The machine was not in use, but stood for 2.5 years without observing the storage conditions, so the computer (system unit) does not work. Everything else is normal. We are ready to present the machine for inspection at any time. The machine is currently stored in a warehouse in the Republic of Tatarstan.
Description: Machine with 1,2 or 3 units Useful width: 600mm Parts up to 150mm high can be passed through. As an option (extra charge), the machine can be fitted with a 300 mm high feeder. Brush dimensions: Ext. diam. 300mm and int. diam. 146 or 70mm, length = working width Belt dimensions L x W, mm: 1900 x630 Main motors HP/kW: 15/11 Feed speed variators, m/min: 6-24 or 3-18 Feed motors HP/kW: 1.5/1.1 Brush oscillation, c/m: 60 or 110 Suction per unit below 125 mm w.c. (wet separator recommended for aluminium) 1 Strip-deburring unit, m3/h. min. : 1500 1 Strip deburring unit, m3/h. max. : 2500 1 Brush unit -m3/h. min.: 1000Approx. Onsite Dimension. (l x w x h): 2,400 x 2,000 x 2,470 mm, weight approx.: 7,000 kg, plate thickness: 150 mm
Parameters: 40 mm, 1500x3000 mm Description: The machine is in good technical condition, after agreement possibility of inspection. The plasma includes a power supply including burners, including acetylene burner. ... más información
Description: Punching power 80 t , Maximum capacity 40×14 mm , Throat S / SD 510 / 750 mm , Working height S / SD 1094 / 1194 mm , GENERAL SPECIFICATIONS , Motor power 9 kw , Strokes/minute with 20 mm Stroke 40 Maximum , Stroke 70 mmweight approx.: 1,400 kg, Approx. Onsite Dimension. (l x w x h): 4,200 x 1,600 x 3,000 mm
Type: 1600 Kombi Plus Parameters: 1600 x 3200 mm Manufacturer: Nessap Year of Manufacture/SO/GO: 2009/-/- Location: Slovakia Description: The machine is in good technical condition. Dimensions of burning sheets: 1600 x 3200mm ... más información
Description: Triple punch 80 tonne punching power Standard gooseneck (S) 500mm Additional gooseneck (SD) 750 Steel punching capacity 42 kg/mm2 mm Ø 40 x 14 Ø 24 x 24 Punching U and I flanges 100 - 300 mm Core punching U 120 - 380 mm Core punching I 100 - 500 mm Adjustable stroke for shearing and punching stations 0 to 70 mm Punching device Gd. Ø (Option) mm Ø 100 x 6 / 50 x 12 Includes : Punching machine. Automatic X & Y positioning table without clamps. Triple punching device 31 - 40 - 31. Fitted with a Fagor 102 S control. Servomotor mobility group, independent for each axis, controlled by encoderweight approx.: 2,100 kg, Approx. Onsite Dimension. (l x w x h): 2,500 x 1,300 x 2,150 mm
I offer hydraulic shears not sheet metal marked NTA 3150/10A manufacturer Strojáreň Piesok. The maximum cutting length is therefore 3150 mm and the strength of the structural steel sheet is 10 mm. Plugged in, fully functional, but so rarely used that its not worth my while to keep them. (they do not fit into our primary production segment) Price negotiable, buyer arranges transport, total weight 14,000 kg Possibility of viewing, testing - at the Chrudim facility
Description: 16 mm cutting capacity Cutting length 3050 mm Stopping capacity 1000 mm Main motor power kW 30 Work rate strokes/min. 5 to 10 Power supply 380 Volts 3 Ph + T + N Square stop length 1000 mmweight approx.: 14,000 kg, Approx. Onsite Dimension. (l x w x h): 3,880 x 2,220 x 2,550 mm ... más información
LINE FOR LOWER AND CROSS-CUTTING OF COILS (annual capacity 10 000 t): Sheet thickness: from 0.4 mm to 2.0 mm Sheet width: from 800 mm to 1580 mm Material: cold rolled and galvanized sheet metal Strength limit: max. 480 MPa (for max. thickness of 1.5 mm) Yield strength: max. 250 MPa (for max. thickness of 1.5 mm) Output material parameters - cut sheets Width tolerance up to: +/- 0.1 mm according to EN 10140 Length tolerance up to: +/- 0.3 mm according to EN 10140 Maximum number of longitudinal stripes: 6 (for max. thickness 1.5 mm) Maximum number of longitudinal sections: 5 (for max. thickness 1.5 mm) Minimum width of one strip: 180 mm Minimum length of boards: 200 mm Maximum length of the boards: 3500 mm +
Description: Roll length 3050 mm Roll diameter 210 mm Crunching thickness 4 mm Roll thickness 6 mm Motor power 7.5 kW Rollers driven by independent hydraulic geared motors. Digital indicators to monitor the position of the crunching rollers. Cone setting device for the crunching rollers. Automatic hydraulic synchronisation of roller parallelism. Hydraulic opening head. Heat treatment of cylinders. Hydraulic roller diverterweight approx.: 3,000 kg, Approx. Onsite Dimension. (l x w x h): 4,700 x 1,700 x 1,500 mm
Rolling mills for cold rolling of sheets 2 types of LSTC profiles (C and U) + PIR profile panel. Documents with characteristics can be obtained as a file. to or email. ... más información
Description: Cutting capacity mm 13 Cutting length mm 3050 Stopping capacity mm 750 Main motor power kW 18.5 Speed strokes/min 8-14 Power supply 380 Volts 3 Ph + T + N Angle stop, length 2000 mm. Numerically controlled electric backgauge. Numerically controlled adjustment of clearance between blade and cutting angle.weight approx.: 12,500 kg, Approx. Onsite Dimension. (l x w x h): 3,880 x 1,650 x 2,100 mm
Isıtan HPK 90 Hydraulic 4 Rolls Pipe and Profile Bending Machine Machine is like new Shaft Diameter 90 mm Rolls Diameter 260 mm Shaft Lenght 160 mm ... más información
Description: 10 mm cutting capacity Cutting length 3050 mm Rear stop capacity 1000 mm Main motor power kW 15 Stroke speed/min 4 - 10 Angle stop, length 1000 mm. Delem DA 310 digital controlweight approx.: 10,000 kg, Approx. Onsite Dimension. (l x w x h): 3,700 x 1,800 x 2,000 mm ... más información
Automatic line for the production of sandwich panels of the LL-2000 brand of the P-SYSTEMS plant (Czech Republic), 2003. The line is designed for the production of wall and roof sandwich panels with mineral wool and polystyrene foam insulation. The manufacturing process is automatic. Requirements for raw materials for sandwich panel sheathing - thickness 0.4 ... 0.6 mm .: - sheet steel galvanized The production process is carried out automatically (with the exception of the laying of insulation and the preparatory process). Completeness of the line, technical characteristics: - Unwinding device - 2 pcs. - Profiling area. - Table for supplying insulation. - Glue application and distribution device. - Steel strip heating section. - Pressing device. - Transverse movable cutting device. - Line control system. Line productivity per shift (8 hours) 1000 sq.m. The maximum spe ...
The MTM-KA1000 multi-electrode machine is designed for the production of masonry mesh from round bars straightened and cut to the required size. The length of the welded mesh can be any and depends only on the length of the longitudinal rods. The width of the welded mesh is 350mm -1000mm; The diameters of welded rods are 3mm -6 mm; Distances between the axes of the rods: transverse 50mm - 200mm; longitudinal 50,100,150,200mm; Rod material: low-carbon steel, smooth or BP; The number of welded transverse rods is 40 pcs/min; Rated voltage 3 ph. mains, 50 Hz, 380V; Maximum power consumption 75-100 kVA; Compressed air pressure in the network, MPa (kgf/cm2) 0.63 (~6.3); Free air flow 2 m3/min; Overall dimensions 1800x1800x1700 mm; Weight 2000 kg
sheet width: 3100 mmplate thickness: 6.35 mmthickness at Niro-steel: 4.00 mmcutting angle: 0.5 - 2.5 °no. of strokes: 12 - 50 Hub/minControl: konv. oil volume: 120 ltr.back stop - adjustable: max. 750 mmengine output: 7.5 kWweight: 4800 kg.range L-W-H: 3950 x 1950 x 1680 mm good / well-maintained condition ()Furnishing:- electro-hydraulic, gate-guided guillotine shears- Electric back gauge with analogue position display- electrical cutting angle adjustment- manual cutting gap adjustment, from behind- Control unit + control cabinet at the front left- 1x extra long side stop- 2x support arms- front finger protection- rear sheet metal slide- 1x freely movable foot switch- original instruction manual Machine link:http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno =1008-9325347The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3100 mmplate thickness: 10.0 mmthickness at Niro-steel: 6.0 mmcutting angle: 1.8 °no. of strokes: 14 Hub/mindown holder: 15 Stückwork height max.: 805 mmColumn width: 3515 mmControl: CYBTOUCH 8 oil volume: 250 lvoltage: 400 Vengine output: 22.0 kWweight: 9000 kgrange L-W-H: 4110 x 2200 x 2100 mm well maintained condition - built in 2019 () New price ~ 55.000 euros Special price on requestFurnishing:- robust electro-hydraulic sheet metal shears- CNC control unit CYBELEC CYBTOUCH 8 (touchscreen) Anti-reflective, robust color touch screen control panel easy positioning to the desired size Positioning accuracy 0.1 mm unlimited material definition in the material library Intuitive menu navigation Separate display for actual and target value Clearance function of the back gauge Cutting length control via adjustable stroke length Cutting counter Automatic stop of the machine when ...