subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 107)
max. ram stroke:220 mmtotal power requirement:1,5 kWweight of the machine ca.:880 kgdimensions of the machine ca.:1.500 x 1.000 x 2.200 mmslot-milling length:220 mmtoolhead swivelling: +/- 10° ° Gradtable::650 x 250 mmtable adjustment: vertical:360 °mmtable adjustment: quer/längs: 170/400 °mmstrokes per minute:45 / 78 / 125 Hub/min feed:: 0,1 / 0,2 / 0,3 in 3 step
FEEDSTOCK TUBE external diameter min.: 22 mm external diameter max.: 140 mm wall thickness min.: 1 mm wall thickness max.: 14 mm length min.: 4500 mm lenght max.: 12500 mmExclusions from supply (even when visible on photos):The equipment is supplied without test equipment and electronics, in particular without:- LMD test spool nominal size 120- Nukem test system installation cabinet- Steel checker plates (safety protection)- Defectomat pass-through spool- Ultrasonic and wall thickness testing system NUKEM- Replacement demagnetization Nukem- Replacement inspection electronics
Machine was completely rebuilt electrically in 2008 and equipped with a new control cabinet, all accessories are included, without conveyor belt or material dispenser, the machine is ready for use, an on-site inspection is possible. ... más información
FEEDSTOCK TUBE external diameter min.: 38 mm external diameter max.: 130 mm length min.: 3000 mm lenght max.: 10000 mmPRODUCT (PROFILE, TUBE) length min.: 4000 mm lenght max.: 13500 mmCHARACTERISTICS DRAWING MACHINE force: 550 kN drawing length max.: 13500 mm number of parallel trains / strands max.: 3 speed max.: 100 m/min pipe brake: yes Function: Automatic (pull chain runs forwards and backwards, front bench swivels vertically)Products: Round tubes, HZ-PZ precision tubes, cardan shafts, profilesModernized: 2016 new motor cooling system1999 new direct current drives2005 new pulling belt brake2015 new drive technologymax. drawing rod / pointed end diameter: 110 mmmin. drawing rod / pointed end diameter: 22 mmmax. drawing rod / pointed end length: 230 mmmin ...
Working length: 3100mm, sheet thickness rounding/ bending: 40/32mm, top/side roll diameter: 460/ 420mm, connected load: 30kW, with documentation, on-site inspection is possible. ... más información
TECHNICAL SPECIFICATION Max. diameter of tube: 65 mm Max. wall thickness: 2 mmELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 5400 mm space requirements -front/back-: 1550 mm total height: 1500 mm total weight approx.: 6500 kg+ 8-axis CNC pipe and wire bender+ CNC controlled feeder with pneumatic grippers+ separate servo drives for A-axis: rotation unit 35 mm B-axis: bending heand C-axis: feeder D-axis: &nb sp;mandrel device L-axis: slide rail P-axis: chucking device V-axis: counter holder Y-axis: bending Z-axis: & nbsp;bending head up/downFeedi ...
Hydraulic pressure: 200 bar, with documentation and length stop, on-site inspection is possible, was used for cutting steel reinforcement pipes for plastic profiles to length, the machine has currently been standing under cover in an outdoor storage facility for two years, the linear guides are affected by rust film, a function test cannot currently be carried out.
Deburring and fine grinding machine for sheet metal / flat material, newThe compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces.Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts.Working width: 1350 mmMaximum part weight: 400 kgWide belts with abrasive belt unwinding: 2620 mmAs standard with vacuum hold system, optional with magnetic hold systemBy using 2620 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life.Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task.The machine structure can accommodate up to 3 internal machining units and an addition ...
STRIP-FEEDER sheet width max.: 210 mm sheet thickness max.: 6 mmStrip feed unit (without servo) for GKP or MFA 160TStrip thickness: 6 mmStrip width: 210mm.It is recommended to use:DYNABOX 45 MEDIUM gearboxServo motor BECKHOFF AM8543-0E20Resolution 0.1mm ... más información
Max. Coil weight: 25t, max. Coil outer diameter: 2500mm, Coil inner diameter: 506-610mm, Finished sheet width: 50-159mm, Strip thickness: 0.6-3mm, with double cone decoiler, threading assembly, straightener (straightener was taken over from an earlier line, Schnutz factory, year of manufacture late 80s - early 90s), loop bridge, strip feed unit, cut-to-length shear, conveyor belt, brush table with gripper, slitting shear (guillotine shear), conveyor belts, stacking unit and gantry gripper with two stacking stations, on-site inspection is possible.
Deburring and fine grinding machine for sheet metal / flat material, newThe compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces.Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts.Working width: 1150 - 1350 mmMaximum part weight: 500 kgWide belts with abrasive belt unwinding: 2620 mmAs standard with vacuum hold system, optional with magnetic hold systemBy using 2620 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life.Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task.The machine structure can accommodate up to 5 internal machining units and 2 ad ...
STRIP-FEEDER sheet width max.: 250 mm sheet thickness max.: 10 mmStrip feed unit (without servo) for GKP or MFA 250TStrip thickness: 10 mmStrip width: 250mm.It is recommended to use:DYNABOX 90 MEDIUM gearboxServo motor BECKHOFF AM8062-0L20Resolution 0.1mm ... más información
Width: 1860mm, depth: 800mm, height: 1900mm, weight: approx. 2.3t Rectangular notchers: 57 x 100mm, triangular notchers: 5 x 5 x 7.5mm. Notching station width: 330mm, working height: 915mm ... más información
Deburring and fine grinding machine for sheet metal / flat material, newThe compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces.Machine is suitable for heavy-duty use.Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts.Working width: 650 - 1650 mmMaximum part weight: 2000 kgWide belts with abrasive belt unwinding: 3250 mmAs standard with vacuum hold system, optional with magnetic hold systemBy using 3250 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life.Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task.The machine structure can accommodate up ...
CONTROLS PLC OVERALL SPECIFICATIONS (COIL LINES) sheet width max.: 500 mm sheet thickness max.: 4 mm coil weight max.: 10.5 to feedstock transport direction: right to left COIL CHAIR coil weight max.: 10.5 to stroke: 750 mmDECOILER design: single reel sheet width max.: 500 mm sheet width (min): 150 mm coil weight max.: 10.5 to max. diameter of coil: 2020 mm mandrel expansion range from: 470 mm mandrel expansion range up to: 530 mm feed velocity max.: 20 m/minCROP SHEAR sheet thickness max.: 4 mm working width max.: 530 mm stroke rate (max.): 20 /minLEVELLER UNIT sheet width max.: 500 mm sheet width (min): 150 mm sheet thickness max.: 4 mm sheet thic ...
There are 2 notching machines available. Rotox SAF 165, year of manufacture: 2007, saw blade diameter: 250mm, speed: 2800rpm, pressure: 6-7bar, weight: 273kg. Hanning BVH8K2, speed: 2700rpm. ... más información
Sheet thickness: 1,00 mmBending length: 1 mmNumber of rolls: 1 Plate rolling machineMIBA - RNF-65 MACH-ID 8487 Make: MIBA Type: RNF-65 Year: 2014 Milling cutter lazer Guided Working range 2000 - 8000 mm Designed for Mobile use on gauge 3000 mm ... más información
CONTROLS PLC SIEMENS S7-400 FEEDSTOCK TUBE external diameter min.: 22 mm external diameter max.: 90 mm length min.: 6000 mm lenght max.: 10000 mmPRODUCT (PROFILE, TUBE) external diameter min.: 17.5 mm external diameter max.: 80 mm length min.: 7000 mm lenght max.: 13500 mmCHARACTERISTICS DRAWING MACHINE force: 1000 kN drawing length max.: 13500 mm number of parallel trains / strands max.: 3 speed max.: 67.5 m/min main drive power: 800 kWModernized:2011 new drawbar mouth2019 new collar bearing, draw bench chain and gearbox2021 new front benchPulling capacity+ 1-fold: 500kN, no short-term overload+ 2-fold: 1000kN, no short-term overload+ 3-fold: 1000kN, short-term overload 1300kN+ RohrbremseAttachments:+ tube brakemax. drawing rod / poin ...
CONTROLS PLC SIEMENS S7 FEEDSTOCK TUBE external diameter min.: 30 mm external diameter max.: 120 mm length min.: 3000 mm lenght max.: 7500 mmPRODUCT (PROFILE, TUBE) length min.: 4000 mm lenght max.: 8800 mmCHARACTERISTICS DRAWING MACHINE force: 450 kN drawing length max.: 8800 mm number of parallel trains / strands max.: 1 speed max.: 100 m/min drive system -drawing machine-: chain Function: Semi-automatic (pull chain runs forwards, front bench can be rotated)Products: Round tubes, precision tubes, cardan shafts, squaresmax. drawing rod / pointed end diameter: 80 mmmin. drawing rod / pointed end diameter: 25 mmmax. drawing rod / pointed end length: 220 mmmin. drawing rod / pointed end length: 170 mmmumber of drawing jaws: min. 1 jaw and 1 reserve jawdrawing ...
CONTROLS PLC SIEMENS S7 300 FEEDSTOCK TUBE external diameter min.: 20 mm external diameter max.: 30 mm length min.: 250 mm lenght max.: 700 mmSystem consists of:+ COMPINA A2.19153 handling system, year 2000+ MAE M-AH 6 automatic pipe straightening machine, year 2012+ Bühlmann (system construction), year 2000